SOLVER7 Study. Nothing Else.
Problem Set 10 Q5

Draw a circle with centre \(P.\) Draw an arc \(AB\) of \(100^\circ\) measure. Draw tangents to the circle at point \(A\) and point \(B.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a circle and picking two points on its edge, like two dots on a clock face. The angle at the centre between those two dots is \( 100^\circ \). Now, at each dot, you draw a straight line that just barely touches the circle without crossing it. Those two lines lean away from each other and meet at a point outside the circle. The gap between them makes an angle of \( 80^\circ \). This works because the two touching lines and the two centre lines together make a four-sided shape with angles adding up to \( 360^\circ \).

Answer: A circle with centre \( P \) is drawn. An arc \( AB \) with \( \angle APB = 100^\circ \) is marked. Tangents at \( A \) and \( B \) are drawn perpendicular to radii \( PA \) and \( PB \) respectively, and they meet outside the circle forming an angle of \( 80^\circ \) between them.

📖 Construction: Tangents at Endpoints of an Arc

Detailed Explanation

An arc of a circle is measured by the central angle it subtends at the centre. So an arc \( AB \) of measure \( 100^\circ \) means \( \angle APB = 100^\circ \), where \( P \) is the centre. A tangent to a circle at a point is a straight line that touches the circle at exactly that point. A key property is that the tangent at any point of a circle is perpendicular to the radius drawn at the point of contact. So, to draw a tangent at point \( A \), we draw a line through \( A \) that is perpendicular to the radius \( PA \). Similarly at \( B \), we draw a line through \( B \) perpendicular to the radius \( PB \).

Formula Used

Tangent-radius property: If \( \ell \) is the tangent to a circle at point \( A \) and \( P \) is the centre, then \( \ell \perp PA \).

Solution

  1. Step 1: Draw a circle of any convenient radius (say \( 3 \) cm) with centre \( P \) using a compass.
  2. Step 2: Mark any point \( A \) on the circle. Join \( PA \). This will act as one radius.
  3. Step 3: At the centre \( P \), use a protractor to measure an angle of \( 100^\circ \) from ray \( PA \). Draw ray \( PB \) such that \( \angle APB = 100^\circ \), where \( B \) lies on the circle. The arc from \( A \) to \( B \) (on the side of the \( 100^\circ \) angle) is arc \( AB \) of measure \( 100^\circ \).
  4. Step 4: To draw the tangent at \( A \): place the protractor at \( A \) on line \( PA \) and draw a line through \( A \) perpendicular to \( PA \). This line is the required tangent at \( A \), because the tangent at any point is perpendicular to the radius at that point.
  5. Step 5: To draw the tangent at \( B \): similarly, draw a line through \( B \) perpendicular to \( PB \). This line is the required tangent at \( B \).
  6. Step 6: Extend both tangent lines. They will meet at a point outside the circle (because the arc measure is less than \( 180^\circ \)). The two tangents drawn at \( A \) and \( B \) meet on the side of the minor arc, and the angle between them is \( 180^\circ - 100^\circ = 80^\circ \).

Final Answer

A circle with centre \( P \) is drawn. An arc \( AB \) with \( \angle APB = 100^\circ \) is marked. Tangents at \( A \) and \( B \) are drawn perpendicular to radii \( PA \) and \( PB \) respectively, and they meet outside the circle forming an angle of \( 80^\circ \) between them.

Common Mistake

A common mistake is to draw the tangent at \( A \) perpendicular to the chord \( AB \) instead of perpendicular to the radius \( PA \). Remember, the tangent is always perpendicular to the radius at the point of contact, not to the chord.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle of any convenient radius (for example, \( 3 \) cm) using a compass, and label the centre \( P \). — Reason: We need a circle to work with; the radius length does not affect the angle relationships.
  2. Step 2: Mark any point \( A \) on the circle and draw the radius \( PA \). — Reason: Point \( A \) will be one endpoint of the arc, and radius \( PA \) is the reference ray from which we measure the central angle.
  3. Step 3: Place a protractor at centre \( P \) along ray \( PA \) and mark an angle of \( 100^\circ \). Draw ray \( PB \) so that \( \angle APB = 100^\circ \) and \( B \) lies on the circle. — Reason: An arc of measure \( 100^\circ \) is defined by a central angle of \( 100^\circ \), so arc \( AB \) on the side of the \( 100^\circ \) angle is the required arc.
  4. Step 4: At point \( A \), draw a line perpendicular to radius \( PA \) (use a protractor or set-square to mark \( 90^\circ \) at \( A \) on segment \( PA \)). This line is the tangent at \( A \). — Reason: The tangent-radius property states that a tangent is perpendicular to the radius at the point of contact, so \( \angle PAT_1 = 90^\circ \) where \( T_1 \) lies on the tangent at \( A \).
  5. Step 5: At point \( B \), draw a line perpendicular to radius \( PB \) in the same way. This line is the tangent at \( B \). — Reason: By the same tangent-radius property, the tangent at \( B \) must be perpendicular to \( PB \), so \( \angle PBT_2 = 90^\circ \) where \( T_2 \) lies on the tangent at \( B \).
  6. Step 6: Extend both tangent lines until they meet at a point outside the circle; call this meeting point \( Q \). — Reason: The two tangents drawn from an external point must converge at a single point, forming the angle we want to measure.
  7. Step 7: Verify the angle at \( Q \): In quadrilateral \( APBQ \), the four interior angles add up to \( 360^\circ \). We know \( \angle PAQ = 90^\circ \), \( \angle PBQ = 90^\circ \), and \( \angle APB = 100^\circ \). So \[ \angle AQB = 360^\circ - 90^\circ - 90^\circ - 100^\circ = 80^\circ \] — Reason: Using the angle-sum property of a quadrilateral confirms that the tangents meet at an angle of \( 80^\circ \).

Final Answer

A circle with centre \( P \) is drawn. An arc \( AB \) with \( \angle APB = 100^\circ \) is marked. Tangents at \( A \) and \( B \) are drawn perpendicular to radii \( PA \) and \( PB \) respectively, and they meet outside the circle forming an angle of \( 80^\circ \) between them.

Common Mistake

One common mistake: Students sometimes draw the tangent at a point by making it perpendicular to the chord \( AB \) instead of perpendicular to the radius at that point, which gives a wrong direction for the tangent line.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( P \) and any convenient radius. Mark point \( A \) on the circle and draw radius \( PA \).
  2. Step 2: At centre \( P \), measure \( \angle APB = 100^\circ \) using a protractor and mark point \( B \) on the circle, giving arc \( AB \) of measure \( 100^\circ \).
  3. Step 3: At \( A \), draw a line perpendicular to \( PA \); at \( B \), draw a line perpendicular to \( PB \). These are the tangents at \( A \) and \( B \) respectively.
  4. Step 4: The two tangents meet at point \( Q \) outside the circle. Since \( \angle PAQ = \angle PBQ = 90^\circ \) and \( \angle APB = 100^\circ \), we get \( \angle AQB = 360^\circ - 90^\circ - 90^\circ - 100^\circ = 80^\circ \).

Answer: A circle with centre \( P \) is drawn. An arc \( AB \) with \( \angle APB = 100^\circ \) is marked. Tangents at \( A \) and \( B \) are drawn perpendicular to radii \( PA \) and \( PB \) respectively, and they meet outside the circle forming an angle of \( 80^\circ \) between them.

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre O. Draw an arc AB that subtends an angle of 130° at the centre. Draw tangents to the circle at points A and B. Find the angle between the two tangents at the external point where they meet.

Solution: Step 1: Draw a circle with centre O and mark any point A on it. Using a protractor, mark point B on the circle such that ∠AOB = 130°. This means arc AB has a measure of 130°. \nStep 2: Draw the tangent at A. Since the radius OA is perpendicular to the tangent at A, we have ∠OAT = 90°, where T is the external point of intersection of the two tangents. \nStep 3: Similarly, draw the tangent at B. Since OB ⊥ tangent at B, we have ∠OBT = 90°. \nStep 4: Consider quadrilateral OATB (where T is the external point). The sum of all interior angles is 360°. So: ∠AOB + ∠OAT + ∠ATB + ∠OBT = 360°. Substituting the known values: \[130° + 90° + \angle ATB + 90° = 360°\] \nSimplifying: \[\angle ATB = 360° - 130° - 90° - 90°\] \[\angle ATB = 50°\] \nThe angle between the two tangents at T is 50°.

Answer: The angle between the two tangents is \(50°\).

Example 2

Question: Draw a circle with centre Q. Two points C and D are marked on the circle such that the arc CD (minor arc) has a measure of 80°. Tangents are drawn to the circle at C and D, meeting at an external point E. Find the angle ∠CED.

Solution: Step 1: Draw a circle with centre Q. Mark points C and D on the circle such that the central angle ∠CQD = 80° (since the arc measure equals the central angle). \nStep 2: Draw the tangent at C. By the property of tangents, QC ⊥ CE, so ∠QCE = 90°. \nStep 3: Draw the tangent at D. Similarly, QD ⊥ DE, so ∠QDE = 90°. \nStep 4: In quadrilateral QCED, the sum of interior angles equals 360°. Therefore: \[\angle CQD + \angle QCE + \angle CED + \angle QDE = 360°\] \nSubstituting known values: \[80° + 90° + \angle CED + 90° = 360°\] \nSolving: \[\angle CED = 360° - 80° - 90° - 90°\] \[\angle CED = 100°\] \nThe angle between the two tangents at external point E is 100°.

Answer: The angle \(\angle CED\) between the two tangents is \(100°\).

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \). Mark an arc \( CD \) such that \( \angle COD = 130^{\circ} \). Draw tangents to the circle at points \( C \) and \( D \). Find the angle between the two tangents at the point where they meet outside the circle.

Solution

  1. Step 1: Draw the figure: Draw a circle with centre \( O \). Mark two points \( C \) and \( D \) on the circle such that the arc \( CD \) subtends an angle \( \angle COD = 130^{\circ} \) at the centre. Draw radii \( OC \) and \( OD \).
  2. Step 2: Draw the tangents: At point \( C \), draw a tangent perpendicular to radius \( OC \), i.e., \( \angle OCT = 90^{\circ} \). At point \( D \), draw a tangent perpendicular to radius \( OD \), i.e., \( \angle ODT = 90^{\circ} \). Let the two tangents meet at external point \( T \).
  3. Step 3: Use the angle sum in quadrilateral OCDT: In quadrilateral \( OCDT \), the sum of all interior angles is \( 360^{\circ} \). We know: \( \angle OCD = 90^{\circ} \) (tangent–radius at \( C \)), \( \angle ODT = 90^{\circ} \) (tangent–radius at \( D \)), and \( \angle COD = 130^{\circ} \). So: \[ \angle CTD = 360^{\circ} - 90^{\circ} - 90^{\circ} - 130^{\circ} \]
  4. Step 4: Calculate the angle between the tangents: Evaluating the expression: \[ \angle CTD = 360^{\circ} - 310^{\circ} = 50^{\circ} \] So the angle between the two tangents at point \( T \) is \( 50^{\circ} \). This also confirms the supplementary relationship: \[ \angle COD + \angle CTD = 130^{\circ} + 50^{\circ} = 180^{\circ} \]

Answer: The angle between the two tangents at the external point \( T \) is \( \angle CTD = 50^{\circ} \). The two tangents drawn at \( C \) and \( D \) are perpendicular to radii \( OC \) and \( OD \) respectively, and they meet outside the circle forming an angle of \( 50^{\circ} \) between them.

Everything you get with Solver7

More questions in Geometric Contructions