SOLVER7 Study. Nothing Else.
2024 Board Paper Q1 (a)

\(\boxed{\phantom{\rule{1cm}{0.4cm}}}\ ABCD \) is trapezium, \(AB\parallel CD\) diagonals of trapezium intersects in point \(P.\)
Write the answers of the following questions :
Draw the figure using given information.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a table where the top edge is shorter than the bottom edge. That table shape is called a trapezium! In trapezium ABCD, the top side AB and the bottom side CD never meet — they stay parallel like train tracks. Now draw two lines connecting the opposite corners: one line from A to C, and another from B to D. These two lines cross each other inside the shape at a special point called P. It is like an X drawn inside the table shape, and the centre of that X is point P.

Answer: The required figure is trapezium ABCD with AB \parallel CD, in which diagonal AC and diagonal BD intersect at point P inside the trapezium.

📖 Drawing a Trapezium with Intersecting Diagonals

Detailed Explanation

A trapezium is a quadrilateral in which exactly one pair of opposite sides is parallel. In trapezium ABCD, the sides AB and CD are the two parallel sides (AB \parallel CD), while AD and BC are the non-parallel sides (called the legs). The diagonals of a quadrilateral are the line segments joining opposite vertices. In trapezium ABCD, the diagonals are AC and BD. When these two diagonals are drawn, they cross each other at a single point inside the trapezium. This intersection point is named P. A very important property of a trapezium is that its diagonals divide each other in the same ratio, i.e. \( \dfrac{AP}{PC} = \dfrac{BP}{PD} \). This property comes from the similarity of triangles \( \triangle APB \) and \( \triangle CPD \).

Formula Used

For trapezium ABCD with AB \parallel CD and diagonals intersecting at P: \[ \dfrac{AP}{PC} = \dfrac{BP}{PD} = \dfrac{AB}{CD} \]

Solution

  1. Step 1: Draw the longer parallel side CD as a horizontal line segment at the bottom. Label the left endpoint as C and the right endpoint as D.
  2. Step 2: Above CD, draw a shorter line segment AB parallel to CD. Label its left endpoint as A and its right endpoint as B. This ensures AB \parallel CD, which is the defining property of the trapezium.
  3. Step 3: Join the non-parallel sides: draw segment AD from A down to D, and segment BC from B down to C. Now the trapezium ABCD is complete with vertices in order A, B, C, D.
  4. Step 4: Draw the two diagonals of the trapezium. The first diagonal AC joins vertex A to the opposite vertex C. The second diagonal BD joins vertex B to the opposite vertex D.
  5. Step 5: Mark the point where diagonals AC and BD cross each other inside the trapezium, and label this intersection point as P. This point P lies on both diagonals.
  6. Step 6: Your final figure shows trapezium ABCD with AB \parallel CD, and diagonals AC and BD meeting at point P. By the Basic Proportionality Theorem applied to \( \triangle APB \sim \triangle CPD \), we get \( \dfrac{AP}{PC} = \dfrac{BP}{PD} \).

Final Answer

The required figure is trapezium ABCD with AB \parallel CD, in which diagonal AC and diagonal BD intersect at point P inside the trapezium.

Common Mistake

A common mistake is labelling the vertices in the wrong order (for example, placing A and C on the same side), which makes AC and BD not act as diagonals. Always label the vertices consecutively around the trapezium so that AC and BD are the diagonals joining opposite vertices.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a horizontal line segment at the bottom and label its left endpoint C and its right endpoint D. — Reason: CD will serve as the longer of the two parallel sides, and placing it at the bottom gives the trapezium a stable base.
  2. Step 2: Above CD, draw a shorter horizontal line segment such that it is parallel to CD. Label its left endpoint A and its right endpoint B, so that \( AB \parallel CD \). — Reason: Having exactly one pair of parallel sides \( (AB \parallel CD) \) is the defining property that makes the quadrilateral a trapezium.
  3. Step 3: Connect vertex A to vertex D by drawing segment AD, and connect vertex B to vertex C by drawing segment BC. — Reason: These two segments are the non-parallel sides (called the legs) of the trapezium, completing the quadrilateral ABCD.
  4. Step 4: Draw diagonal AC by joining vertex A to vertex C. — Reason: In any quadrilateral, a diagonal connects two non-adjacent (opposite) vertices; AC is the first of the two diagonals of trapezium ABCD.
  5. Step 5: Draw diagonal BD by joining vertex B to vertex D. — Reason: BD is the second diagonal; drawing both diagonals lets us locate their point of intersection inside the trapezium.
  6. Step 6: Mark the point where diagonal AC and diagonal BD cross each other and label it P. — Reason: Because \( AB \parallel CD \), the diagonals must intersect at a point inside the trapezium; this point P divides each diagonal in the same ratio, namely \( \dfrac{AP}{PC} = \dfrac{BP}{PD} \), a result that follows from the similarity of triangles \( \triangle APB \) and \( \triangle CPD \).

Final Answer

The required figure is trapezium ABCD with AB \parallel CD, in which diagonal AC and diagonal BD intersect at point P inside the trapezium.

Common Mistake

One common mistake: students sometimes draw both diagonals meeting outside the trapezium or on one of its sides; because AB \parallel CD forces the two triangles formed at the intersection to be similar, the crossing point P always lies strictly inside the trapezium.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw horizontal segment CD (longer, bottom); draw segment AB (shorter) above and parallel to CD, so that \( AB \parallel CD \).
  2. Step 2: Join A to D and B to C to form the non-parallel legs, completing trapezium ABCD.
  3. Step 3: Draw diagonal AC (from A to C) and diagonal BD (from B to D); label their intersection point P.

Answer: The required figure is trapezium ABCD with AB \parallel CD, in which diagonal AC and diagonal BD intersect at point P inside the trapezium.

➕ More Examples

More Examples

Example 1

Question: In trapezium \( PQRS \), \( PQ \parallel SR \). The diagonals \( PR \) and \( QS \) intersect at point \( T \). If \( PQ = 6 \) cm, \( SR = 9 \) cm, and \( PT = 4 \) cm, find the length \( TR \).

Solution: Since \( PQ \parallel SR \), triangles \( TPQ \) and \( TRS \) are similar by AA similarity (alternate interior angles are equal and vertically opposite angles are equal). Therefore, their corresponding sides are proportional: \[ \frac{PT}{TR} = \frac{PQ}{SR} \] Substituting the known values: \[ \frac{4}{TR} = \frac{6}{9} \] Cross-multiplying: \[ 6 \times TR = 4 \times 9 \] \[ 6 \times TR = 36 \] Dividing both sides by 6: \[ TR = 6 \text{ cm} \]

Answer: \( TR = 6 \) cm

Example 2

Question: In trapezium \( KLMN \), \( KL \parallel NM \). The diagonals \( KM \) and \( LN \) intersect at point \( O \). If \( KL = 8 \) cm, \( NM = 12 \) cm, \( LO = 5 \) cm, and \( NO = x \) cm, find the value of \( x \). Also find \( KO \) if \( KM = 15 \) cm.

Solution: Since \( KL \parallel NM \), triangles \( OKL \) and \( OMN \) are similar by AA similarity. Using the ratio of corresponding sides: \[ \frac{LO}{ON} = \frac{KL}{NM} \] Substituting the known values: \[ \frac{5}{x} = \frac{8}{12} \] Cross-multiplying: \[ 8x = 5 \times 12 = 60 \] Dividing both sides by 8: \[ x = 7.5 \text{ cm} \] Now, to find \( KO \), we use the same ratio along diagonal \( KM \): \[ \frac{KO}{OM} = \frac{KL}{NM} = \frac{8}{12} = \frac{2}{3} \] Since \( KO + OM = KM = 15 \) cm, let \( KO = 2k \) and \( OM = 3k \). Then: \[ 2k + 3k = 15 \] \[ 5k = 15 \] \[ k = 3 \] Therefore: \[ KO = 2 \times 3 = 6 \text{ cm} \]

Answer: \( x = NO = 7.5 \) cm and \( KO = 6 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: PQRS is a trapezium in which \ PQ \ \parallel \ SR. The diagonals PR and QS intersect each other at point T. (i) Draw a neat labelled figure using the given information. (ii) Name the two triangles formed on either side of point T along diagonal PR.

Solution

  1. Step 1: Identify the shape and parallel sides: We are told PQRS is a trapezium with \ \( PQ \parallel SR \). This means PQ and SR are the two parallel sides (called bases), while PS and QR are the non-parallel sides (called legs).
  2. Step 2: Draw the trapezium: Draw the longer base SR horizontally at the bottom. Draw the shorter base PQ horizontally above SR, centred above it. Connect S to P (left leg) and R to Q (right leg) to complete trapezium PQRS. Label all four vertices P (top-left), Q (top-right), R (bottom-right), and S (bottom-left).
  3. Step 3: Draw and label the diagonals: Draw diagonal PR by joining vertex P (top-left) to vertex R (bottom-right). Draw diagonal QS by joining vertex Q (top-right) to vertex S (bottom-left). Mark the point where the two diagonals cross as T. The figure now shows trapezium PQRS with diagonals PR and QS intersecting at point T inside the trapezium.
  4. Step 4: Name the two triangles along diagonal PR: Diagonal PR is divided by point T into two segments: PT and TR. Together with parts of the other diagonal QS, two triangles are formed along PR. Triangle PTQ is formed above T (vertices P, T, Q) and triangle TRS is formed below T (vertices T, R, S). Note that \( \triangle PTQ \) and \( \triangle TRS \) are similar triangles because \( PQ \parallel SR \), giving equal alternate interior angles.

Answer: The required figure is trapezium PQRS with \( PQ \parallel SR \), in which diagonal PR and diagonal QS intersect at point T inside the trapezium. The two triangles formed along diagonal PR on either side of point T are \( \triangle PTQ \) (above T) and \( \triangle TRS \) (below T).

Everything you get with Solver7

More questions in Geometric Contructions