SOLVER7 Study. Nothing Else.
2023 Board Paper Q2

\(\Delta SHR\sim \Delta SVU.\) In \(\Delta SHR,\ SH=4.5\ cm,\ HR=5.2\ cm,\ SR=5.8\ cm\) and \(\dfrac{SH}{SV}=\dfrac{3}{5},\) construct \(\Delta SVU.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a small drawing of a triangle and you want to make a bigger copy of it. You blow it up like a balloon, making every side grow by the same amount. Here, the small triangle has sides of 4.5 cm, 5.2 cm, and 5.8 cm. We grow each side by a magic multiplier of \( \dfrac{5}{3} \). The new bigger triangle keeps the exact same shape, just larger in size.

Answer: The required \(\Delta SVU\) is constructed with \(SV = 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm, similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

📖 Construction of Similar Triangle SVU from Triangle SHR

Detailed Explanation

When two triangles are similar, their corresponding sides are proportional. Here \(\Delta SHR \sim \Delta SVU\), so the corresponding vertices are S \(\leftrightarrow\) S, H \(\leftrightarrow\) V, and R \(\leftrightarrow\) U. The ratio \(\dfrac{SH}{SV} = \dfrac{3}{5}\) tells us that \(\Delta SVU\) is larger than \(\Delta SHR\), with each side of \(\Delta SVU\) being \(\dfrac{5}{3}\) times the corresponding side of \(\Delta SHR\). To construct \(\Delta SVU\), we first draw \(\Delta SHR\), then use the scale factor method: draw an acute ray from S, mark 5 equal divisions on it, and use the 3rd and 5th points to locate V (an extension of SH) and then draw VU parallel to HR to complete the enlarged triangle.

Formula Used

If \(\Delta SHR \sim \Delta SVU\), then \(\dfrac{SH}{SV} = \dfrac{HR}{VU} = \dfrac{SR}{SU} = \dfrac{3}{5}\).

Solution

  1. Step 1: Find the corresponding side lengths of \(\Delta SVU\) using the ratio \(\dfrac{SH}{SV} = \dfrac{3}{5}\). \[SV = \dfrac{5}{3} \times SH = \dfrac{5}{3} \times 4.5 = 7.5 \text{ cm}\] \[VU = \dfrac{5}{3} \times HR = \dfrac{5}{3} \times 5.2 \approx 8.67 \text{ cm}\] \[SU = \dfrac{5}{3} \times SR = \dfrac{5}{3} \times 5.8 \approx 9.67 \text{ cm}\] These give us an idea of the size, but the construction itself uses the scale-factor method with the given \(\Delta SHR\).
  2. Step 2: Construct \(\Delta SHR\) first. Draw segment \(SR = 5.8\) cm. With S as centre and radius \(4.5\) cm, draw an arc. With R as centre and radius \(5.2\) cm, draw another arc cutting the first arc at H. Join SH and HR. Now \(\Delta SHR\) is ready.
  3. Step 3: Draw a ray \(SX\) from S making an acute angle with \(SR\), on the side opposite to H. Since the ratio is \(\dfrac{3}{5}\) and \(5 > 3\), we need 5 equal divisions on this ray.
  4. Step 4: On ray \(SX\), mark 5 points \(S_1, S_2, S_3, S_4, S_5\) such that \(SS_1 = S_1S_2 = S_2S_3 = S_3S_4 = S_4S_5\) (equal small distances using the compass).
  5. Step 5: Join \(S_3\) to R (the 3rd point, because the denominator of \(\dfrac{SH}{SV}\) is 3 for the smaller triangle side and 5 for the larger). Through \(S_5\) draw a line parallel to \(S_3R\), meeting the extension of \(SR\) at point U. Then \(SU = \dfrac{5}{3} \, SR\).
  6. Step 6: Through U, draw a line parallel to RH, meeting the extension of \(SH\) at point V. Join VU. The triangle \(SVU\) so obtained is the required triangle similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).
  7. Step 7: Verify by measurement: \(SV \approx 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm, which match the calculated proportional lengths. Hence \(\Delta SVU \sim \Delta SHR\) as required.

Final Answer

The required \(\Delta SVU\) is constructed with \(SV = 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm, similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

Common Mistake

A common mistake is confusing the direction of enlargement. Since \(\dfrac{SH}{SV} = \dfrac{3}{5}\), SV is longer than SH, so \(\Delta SVU\) is bigger than \(\Delta SHR\). Students often shrink the triangle by mistake. Also, remember to join the 3rd point (smaller number in the ratio) to R, not the 5th, and then draw a parallel line through the 5th point.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the correspondence and scale factor. Since \(\Delta SHR \sim \Delta SVU\), the vertex pairs are S\(\leftrightarrow\)S, H\(\leftrightarrow\)V, and R\(\leftrightarrow\)U. The given ratio \(\dfrac{SH}{SV} = \dfrac{3}{5}\) means \(\Delta SVU\) is larger than \(\Delta SHR\). — Reason: Establishing vertex correspondence tells us which sides match up and confirms the scale factor is \(\dfrac{5}{3}\) (from \(\Delta SHR\) to \(\Delta SVU\)).
  2. Step 2: Calculate the side lengths of \(\Delta SVU\). Using the scale factor \(\dfrac{5}{3}\): \[SV = \dfrac{5}{3} \times SH = \dfrac{5}{3} \times 4.5 = 7.5 \text{ cm}\] \[VU = \dfrac{5}{3} \times HR = \dfrac{5}{3} \times 5.2 \approx 8.67 \text{ cm}\] \[SU = \dfrac{5}{3} \times SR = \dfrac{5}{3} \times 5.8 \approx 9.67 \text{ cm}\] — Reason: Multiplying each side of \(\Delta SHR\) by \(\dfrac{5}{3}\) gives the target dimensions of the enlarged triangle, which serve as a check after construction.
  3. Step 3: Construct the base triangle \(\Delta SHR\). Draw segment SR of length \(5.8\) cm. With S as centre draw an arc of radius \(4.5\) cm, and with R as centre draw an arc of radius \(5.2\) cm. Label the intersection point H. — Reason: \(\Delta SHR\) is drawn first because the scale-factor construction method enlarges it to produce \(\Delta SVU\).
  4. Step 4: Draw an acute ray from vertex S. From S, draw a ray \(SX\) at an acute angle (below or above the triangle, away from R), and mark 5 equal divisions on it using a compass. Label these points \(A_1, A_2, A_3, A_4, A_5\) sequentially from S. — Reason: We need 5 equal parts because the scale factor has denominator 3 and numerator 5, so the ray must accommodate the larger value (5).
  5. Step 5: Locate point V by extending SH. Join \(A_3\) to H. Then draw a line through \(A_5\) parallel to \(A_3 H\). The point where this parallel line meets the extension of SH is point V. — Reason: The ratio \(SA_3 : SA_5 = 3:5\) replicates the scale factor, so V divides (or extends) the line through S and H such that \(SV = \dfrac{5}{3} \times SH\).
  6. Step 6: Draw VU parallel to HR to complete \(\Delta SVU\). Through V, draw a line parallel to HR. The point where this line meets the extension of SR is point U. — Reason: Because \(\Delta SVU \sim \Delta SHR\), the side VU must be parallel to HR. This parallel guarantees the angle at V equals the angle at H, preserving similarity.
  7. Step 7: Verify the construction by measuring. Check that \(SV \approx 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm with a ruler. — Reason: Comparing measured values with the calculated values from Step 2 confirms that the construction is accurate and the triangles are indeed similar with scale factor \(\dfrac{5}{3}\).

Final Answer

The required \(\Delta SVU\) is constructed with \(SV = 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm, similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

Common Mistake

One common mistake: Students sometimes mark only 3 equal divisions on the ray (equal to the denominator) and join the 3rd point directly, forgetting that the ray must extend to 5 divisions (the numerator) so that the correct proportion \(3:5\) is set up for locating point V.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Scale factor: \ \dfrac{5}{3}
  2. Step 2: \ SV = \dfrac{5}{3} \times 4.5 = 7.5 \ \text{cm}, \quad VU = \dfrac{5}{3} \times 5.2 \approx 8.67 \ \text{cm}, \quad SU = \dfrac{5}{3} \times 5.8 \approx 9.67 \ \text{cm}
  3. Step 3: Construct \( \Delta SHR \) with \( SR = 5.8 \) cm, \( SH = 4.5 \) cm, \( HR = 5.2 \) cm. Draw ray from S, mark 5 equal parts; join 3rd point to R, draw parallel through 5th point to locate V, then draw \( VU \parallel HR \).

Answer: The required \(\Delta SVU\) is constructed with \(SV = 7.5\) cm, \(VU \approx 8.67\) cm, and \(SU \approx 9.67\) cm, similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

➕ More Examples

More Examples

Example 1

Question: \( \triangle ABC \sim \triangle PQR \). In \( \triangle ABC \), \( AB = 3.6 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm and \( \dfrac{AB}{PQ} = \dfrac{2}{5} \). Construct \( \triangle PQR \).

Solution: Step 1: Identify the scale factor. The ratio of corresponding sides is given as \( \dfrac{AB}{PQ} = \dfrac{2}{5} \), so the scale factor from \( \triangle ABC \) to \( \triangle PQR \) is \[ k = \frac{5}{2} = 2.5 \] Step 2: Find the sides of \( \triangle PQR \) by multiplying each side of \( \triangle ABC \) by \( k = 2.5 \). For side \( PQ \) (corresponding to \( AB \)): \[ PQ = AB \times 2.5 = 3.6 \times 2.5 = 9 \text{ cm} \] For side \( QR \) (corresponding to \( BC \)): \[ QR = BC \times 2.5 = 4.8 \times 2.5 = 12 \text{ cm} \] For side \( PR \) (corresponding to \( AC \)): \[ PR = AC \times 2.5 = 5.4 \times 2.5 = 13.5 \text{ cm} \] Step 3: Construct \( \triangle PQR \) with sides \( PQ = 9 \) cm, \( QR = 12 \) cm, and \( PR = 13.5 \) cm using a ruler and compass (SSS construction).

Answer: \( PQ = 9 \) cm, \( QR = 12 \) cm, \( PR = 13.5 \) cm

Example 2

Question: \( \triangle LMN \sim \triangle LXY \). In \( \triangle LMN \), \( LM = 6 \) cm, \( MN = 7.5 \) cm, \( LN = 9 \) cm and \( \dfrac{LM}{LX} = \dfrac{3}{2} \). Construct \( \triangle LXY \).

Solution: Step 1: Identify the scale factor. The ratio of corresponding sides is given as \( \dfrac{LM}{LX} = \dfrac{3}{2} \), so the scale factor from \( \triangle LMN \) to \( \triangle LXY \) is \[ k = \frac{2}{3} \] Step 2: Find the sides of \( \triangle LXY \) by multiplying each side of \( \triangle LMN \) by \( k = \dfrac{2}{3} \). For side \( LX \) (corresponding to \( LM \)): \[ LX = 6 \times \frac{2}{3} = 4 \text{ cm} \] For side \( XY \) (corresponding to \( MN \)): \[ XY = 7.5 \times \frac{2}{3} = 5 \text{ cm} \] For side \( LY \) (corresponding to \( LN \)): \[ LY = 9 \times \frac{2}{3} = 6 \text{ cm} \] Step 3: Construct \( \triangle LXY \) with sides \( LX = 4 \) cm, \( XY = 5 \) cm, and \( LY = 6 \) cm using a ruler and compass (SSS construction).

Answer: \( LX = 4 \) cm, \( XY = 5 \) cm, \( LY = 6 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: \( \Delta ABC \sim \Delta ADE \). In \( \Delta ABC \), \( AB = 3.6 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm and \( \dfrac{AB}{AD} = \dfrac{3}{4} \). Construct \( \Delta ADE \).

Solution

  1. Step 1: Understand the given information: We are given \( \Delta ABC \sim \Delta ADE \) with \( AB = 3.6 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm, and the ratio \( \dfrac{AB}{AD} = \dfrac{3}{4} \). This means the scale factor from \( \Delta ABC \) to \( \Delta ADE \) is \( \dfrac{4}{3} \).
  2. Step 2: Identify corresponding sides: Since \( \Delta ABC \sim \Delta ADE \), the correspondence is: \( A \leftrightarrow A \), \( B \leftrightarrow D \), \( C \leftrightarrow E \). Therefore: \( \dfrac{AD}{AB} = \dfrac{DE}{BC} = \dfrac{AE}{AC} = \dfrac{4}{3} \).
  3. Step 3: Calculate AD: Using \( \dfrac{AD}{AB} = \dfrac{4}{3} \), we get \( AD = \dfrac{4}{3} \times AB \). Substituting \( AB = 3.6 \) cm: \[ AD = \dfrac{4}{3} \times 3.6 = 4.8 \text{ cm} \]
  4. Step 4: Calculate DE: Using \( \dfrac{DE}{BC} = \dfrac{4}{3} \), we get \( DE = \dfrac{4}{3} \times BC \). Substituting \( BC = 4.8 \) cm: \[ DE = \dfrac{4}{3} \times 4.8 = 6.4 \text{ cm} \]
  5. Step 5: Calculate AE: Using \( \dfrac{AE}{AC} = \dfrac{4}{3} \), we get \( AE = \dfrac{4}{3} \times AC \). Substituting \( AC = 5.4 \) cm: \[ AE = \dfrac{4}{3} \times 5.4 = 7.2 \text{ cm} \]
  6. Step 6: Construct triangle ADE: Using the calculated sides \( AD = 4.8 \) cm, \( DE = 6.4 \) cm, and \( AE = 7.2 \) cm, construct \( \Delta ADE \) with a ruler and compass by first drawing \( AD = 4.8 \) cm, then drawing arcs of radius \( 7.2 \) cm from \( A \) and \( 6.4 \) cm from \( D \) to locate point \( E \). Join \( AE \) and \( DE \) to complete the triangle.

Answer: \( \Delta ADE \) is constructed with \( AD = 4.8 \) cm, \( DE = 6.4 \) cm, and \( AE = 7.2 \) cm, similar to \( \Delta ABC \) with scale factor \( \dfrac{4}{3} \).

Everything you get with Solver7

More questions in Geometric Contructions