Draw a circle with centre \(O\) and radius \(3.5\ cm.\) Take point \(P\) at a distance \(5.7\ cm\) from the centre. Draw tangents to the circle from point \(P.\)
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
Imagine a circle like a round pond and you are standing outside it. You want to touch the edge of the pond with a straight stick, just barely touching it at one spot. You can do this in exactly two ways, one on each side. Those two touching lines are called tangents. A clever trick using a helper circle helps us find those exact touching spots. Each stick turns out to be about \( 4.5 \) cm long.
Answer: Two tangents \( PA \) and \( PB \) are constructed from point \( P \) to the circle, each of length approximately \( 4.5\ \text{cm} \).
A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A key property is that the tangent is always perpendicular to the radius drawn to the point of contact. So if we can locate the points on the circle where the radius makes a right angle with the line from the external point, we can draw the tangents. To do this, we use the fact that any angle inscribed in a semicircle is a right angle (Thales' theorem). If we draw a circle with \( OP \) as diameter, this new circle will intersect the original circle at exactly the two points where \( \angle OAP = 90^\circ \) and \( \angle OBP = 90^\circ \). These intersection points are the points of contact of the two tangents from \( P \).
Length of tangent from an external point: \( PA = \sqrt{OP^2 - r^2} \). Here, \( PA = \sqrt{5.7^2 - 3.5^2} = \sqrt{32.49 - 12.25} = \sqrt{20.24} \approx 4.5\ \text{cm} \).
Two tangents \( PA \) and \( PB \) are constructed from point \( P \) to the circle, each of length approximately \( 4.5\ \text{cm} \).
A common mistake is to draw the tangents directly from \( P \) by eye, without constructing the auxiliary circle on \( OP \) as diameter. Without this construction, the lines drawn will not be truly tangent — they will either cross the circle (secant) or miss it. Always use the midpoint of \( OP \) as the centre of the helper circle to guarantee a \( 90^\circ \) angle at the point of contact.
Two tangents \( PA \) and \( PB \) are constructed from point \( P \) to the circle, each of length approximately \( 4.5\ \text{cm} \).
One common mistake: Using the full length OP as the radius of the auxiliary circle instead of half of OP (i.e., MP). The auxiliary circle must have OP as its diameter, not its radius, so the centre must be at midpoint M and the radius must be \( 2.85 \text{ cm} \), not \( 5.7 \text{ cm} \).
Answer: Two tangents \( PA \) and \( PB \) are constructed from point \( P \) to the circle, each of length approximately \( 4.5\ \text{cm} \).
Question: Draw a circle with centre O and radius 4 cm. Take a point P at a distance of 6.5 cm from the centre O. Draw tangents to the circle from point P. Also find the length of each tangent.
Solution: Construction Steps: 1. Draw a circle with centre O and radius \( r = 4 \) cm. 2. Mark point P such that \( OP = 6.5 \) cm. 3. Find midpoint M of OP, so \( OM = \frac{6.5}{2} = 3.25 \) cm. 4. Draw a circle with centre M and radius 3.25 cm (diameter = OP). 5. Let this circle intersect the original circle at points T1 and T2. 6. Join P–T1 and P–T2. These are the required tangents. \nVerification: Since T1 lies on a circle with diameter OP, angle OT1P = 90°, confirming OT1 ⊥ PT1, so PT1 is indeed a tangent. \nCalculating the length of each tangent using the formula \( \ell = \sqrt{d^2 - r^2} \): \[ \ell = \sqrt{(6.5)^2 - (4)^2} \] \[ \ell = \sqrt{42.25 - 16} \] \[ \ell = \sqrt{26.25} \] \[ \ell \approx 5.12 \text{ cm} \]
Answer: The two tangents PT1 and PT2 are drawn, each of length \( \approx 5.12 \) cm.
Question: A circle has its centre at O and a radius of 3 cm. A point Q is located 7 cm away from O. Construct the two tangents from Q to the circle and calculate the length of each tangent.
Solution: Construction Steps: 1. Draw a circle with centre O and radius \( r = 3 \) cm. 2. Mark point Q such that \( OQ = 7 \) cm. 3. Find midpoint N of OQ, so \( ON = \frac{7}{2} = 3.5 \) cm. 4. Draw a circle with centre N and radius 3.5 cm (taking OQ as diameter). 5. Let this circle cut the original circle at points A and B. 6. Join Q–A and Q–B. These are the required tangents from Q. \nVerification: Since A lies on a circle with diameter OQ, angle OAQ = 90°, so OA ⊥ QA, confirming QA is a tangent to the original circle. \nCalculating the length of each tangent using \( \ell = \sqrt{d^2 - r^2} \): \[ \ell = \sqrt{(7)^2 - (3)^2} \] \[ \ell = \sqrt{49 - 9} \] \[ \ell = \sqrt{40} \] \[ \ell = 2\sqrt{10} \approx 6.32 \text{ cm} \]
Answer: The two tangents QA and QB are drawn, each of length \( 2\sqrt{10} \approx 6.32 \) cm.
Question: Draw a circle with centre \( O \) and radius \( 4\ \text{cm} \). Take a point \( P \) at a distance \( 7.5\ \text{cm} \) from the centre \( O \). Draw tangents \( PA \) and \( PB \) from point \( P \) to the circle and measure their lengths.
Answer: Two tangents \( PA \) and \( PB \) are constructed from point \( P \) to the circle, each of length approximately \( 6.34\ \text{cm} \).