Draw a circle of radius \(3.2\ cm\) and centre \(\text{'O'.}\) Take any point \(P\) on it. Draw tangent to the circle through point \(P\) using the centre of the circle.
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
Imagine a ball sitting on a flat floor. The floor only touches the ball at one tiny spot. That touching line is just like a tangent! A tangent is a line that just barely touches a circle at one point. There is a cool trick: a line drawn from the centre to the touching point always makes a perfect corner with the tangent. So we draw a circle, pick a point on it, draw a line from the centre to that point, and then draw a line making a right angle at that point. That right-angle line is our tangent!
Answer: The line \( XY \) drawn through \( P \) perpendicular to the radius \( OP \) is the required tangent to the circle of radius \( 3.2 \) cm at the point \( P \).
A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property of a tangent is that it is always perpendicular to the radius drawn to the point of contact. This means if we know the centre \( O \) and the point \( P \) on the circle, we can draw the radius \( OP \) and then draw a line through \( P \) that is perpendicular to \( OP \). This perpendicular line will be the required tangent. This method is called the 'centre method' of drawing a tangent.
Key property used: If a line is tangent to a circle at point \( P \), then it is perpendicular to the radius at \( P \), i.e. \( OP \perp \) tangent.
The line \( XY \) drawn through \( P \) perpendicular to the radius \( OP \) is the required tangent to the circle of radius \( 3.2 \) cm at the point \( P \).
A common mistake is drawing the line through \( P \) at an angle that is not exactly \( 90^\circ \) to the radius \( OP \). If the angle is not \( 90^\circ \), the line will actually cut the circle at two points (becoming a secant) instead of touching it at just one point, so it will not be a tangent.
The line \( XY \) drawn through \( P \) perpendicular to the radius \( OP \) is the required tangent to the circle of radius \( 3.2 \) cm at the point \( P \).
One common mistake: students sometimes draw the perpendicular at the centre \( O \) instead of at the point of contact \( P \); the perpendicular must always be constructed at \( P \), because the tangent–radius angle of \( 90^\circ \) is at the point where the tangent touches the circle.
Answer: The line \( XY \) drawn through \( P \) perpendicular to the radius \( OP \) is the required tangent to the circle of radius \( 3.2 \) cm at the point \( P \).
Question: Draw a circle of radius \( 4.5 \) cm with centre O. Mark a point M on the circle. Construct the tangent to the circle at point M using the centre of the circle. Verify that the tangent is perpendicular to the radius OM.
Solution: Step 1: Draw a circle of radius \( 4.5 \) cm with centre O using a compass. \nStep 2: Mark any point M on the circumference of the circle. \nStep 3: Draw the radius OM and extend it slightly beyond M. \nStep 4: Place the compass at M. Draw two arcs of a convenient equal radius (say \( 2 \) cm) on either side of OM, cutting the line OM (extended) at points A and B, such that \( MA = MB \). \nStep 5: Increase the compass radius (to more than \( MA \)). With A as centre draw an arc above the line OM. With B as centre and the same radius draw another arc. Let these arcs intersect at point Q. \nStep 6: Draw the line through P (here M) and Q. The line MQ is the tangent to the circle at M. \nVerification: Measure the angle \( \angle OMQ \) with a protractor. It should equal \( 90^{\circ} \), confirming that the tangent MQ is perpendicular to the radius OM.
Answer: The tangent MQ is drawn at point M on the circle of radius \( 4.5 \) cm, and \( \angle OMQ = 90^{\circ} \).
Question: A circle of radius \( 3.8 \) cm is drawn with centre C. A point T is chosen on the circle. Using the centre of the circle, construct the tangent to the circle at T. Also, name the property that justifies your construction.
Solution: Step 1: Using a compass, draw a circle of radius \( 3.8 \) cm with centre C. \nStep 2: Mark any point T on the circle. \nStep 3: Join CT (the radius to point T). Extend CT beyond T for clarity. \nStep 4: Place the compass at T with a small radius (say \( 1.5 \) cm) and mark two points X and Y on the line CT on either side of T, so that \( TX = TY \). \nStep 5: With X as centre and a radius greater than \( TX \), draw an arc on one side of line CT. Repeat with Y as centre using the same radius. Let the two arcs intersect at point Z. \nStep 6: Draw the straight line through T and Z. The line TZ is the required tangent at T. \nProperty: The tangent to a circle at any point is perpendicular to the radius drawn at that point of contact. Hence, \( CT \perp TZ \), which means \( \angle CTZ = 90^{\circ} \).
Answer: The tangent TZ is constructed at point T on the circle of radius \( 3.8 \) cm, with \( \angle CTZ = 90^{\circ} \). The property used is: a tangent is perpendicular to the radius at the point of tangency.
Question: Draw a circle of radius 4.5 cm with centre O. Mark a point Q on the circle. Using the centre of the circle, construct the tangent to the circle at the point Q. Write the steps of construction.
Answer: The line MN drawn through Q, perpendicular to the radius OQ, is the required tangent to the circle of radius 4.5 cm at the point Q.