SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q2

Draw a circle of radius \(2.7\ cm.\) Draw a tangent to the circle at any point on it.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a ball sitting on a flat table. The table only touches the ball at one tiny spot. That touching line is like a tangent! A tangent is a straight line that touches a circle at just one point. There is a cool rule: the line from the circle's centre to that touching point always stands perfectly upright against the tangent, like a wall meeting the floor. So we draw a circle of radius \( 2.7 \) cm, pick a point on it, draw the radius there, and place our tangent line straight across it at a right angle.

Answer: The line \( AB \), drawn perpendicular to the radius \( OP \) at the point \( P \) on the circle of radius \( 2.7\ cm \), is the required tangent to the circle at \( P \).

📖 Constructing a Tangent to a Circle at a Point on it

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property of a tangent is that it is always perpendicular to the radius drawn to the point of contact. So, to draw a tangent at a given point on a circle, we simply need to draw a line at that point which is perpendicular to the radius passing through it.

Formula Used

Key property: The tangent at any point of a circle is perpendicular to the radius through the point of contact. That is, if \( OP \) is the radius and \( AB \) is the tangent at \( P \), then \( OP \perp AB \).

Solution

  1. Step 1: Mark a point \( O \) on your paper. This will be the centre of the circle.
  2. Step 2: Open the compass to a radius of \( 2.7\ cm \) using a ruler. Place the compass needle on \( O \) and draw a complete circle.
  3. Step 3: Mark any point \( P \) on the circumference of the circle. This will be the point of contact where the tangent will touch the circle.
  4. Step 4: Join \( O \) and \( P \) with a straight line using a ruler. This line \( OP \) is the radius of the circle drawn to the point \( P \).
  5. Step 5: At point \( P \), construct a line perpendicular to \( OP \). To do this, place the protractor at \( P \) so that its base lies along \( OP \) and mark an angle of \( 90^\circ \). Alternatively, use the compass method: with \( P \) as centre, draw arcs cutting \( OP \) on both sides, then from those two points draw intersecting arcs above and join them through \( P \).
  6. Step 6: Extend this perpendicular line on both sides of \( P \) and label it as \( AB \). Then \( AB \) is the required tangent to the circle at point \( P \).
  7. Step 7: Verification: Since \( \angle OPA = \angle OPB = 90^\circ \), the line \( AB \) is perpendicular to the radius \( OP \) at \( P \). Hence \( AB \) is indeed a tangent to the circle at \( P \).

Final Answer

The line \( AB \), drawn perpendicular to the radius \( OP \) at the point \( P \) on the circle of radius \( 2.7\ cm \), is the required tangent to the circle at \( P \).

Common Mistake

A common mistake is to draw the tangent as a line simply 'touching' the circle by eye, without ensuring it is exactly perpendicular to the radius at the point of contact. If the angle at \( P \) is not exactly \( 90^\circ \), the line will either cut the circle at two points (becoming a secant) or miss it, and will not be a true tangent.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Choose a point \( O \) on your paper and label it as the centre of the circle. — Reason: Every circle needs a fixed centre from which all points on the boundary are equidistant.
  2. Step 2: Set your compass to a width of \( 2.7 \) cm using a ruler. Place the compass needle at \( O \) and draw a full circle. — Reason: This creates a circle of the required radius \( r = 2.7 \) cm centred at \( O \).
  3. Step 3: Mark any point on the circumference of the circle and label it \( P \). — Reason: \( P \) will be the point of contact, i.e., the exact point where the tangent will touch the circle.
  4. Step 4: Use a ruler to draw a straight line joining \( O \) to \( P \). Label this line segment \( OP \). — Reason: \( OP \) is the radius at the point of contact, and our tangent must be perpendicular to it.
  5. Step 5: At point \( P \), construct a line perpendicular to \( OP \): place a protractor at \( P \) with its base along \( OP \) and mark \( 90^\circ \). Draw a straight line \( AB \) through \( P \) at that angle. — Reason: By the fundamental tangent property, the tangent must make an angle of \( 90^\circ \) with the radius \( OP \) at the point \( P \).
  6. Step 6: Extend line \( AB \) on both sides of \( P \) to complete the tangent line. Verify using the protractor that \( \angle OPA = 90^\circ \). — Reason: Confirming the right angle ensures the construction is accurate and \( AB \) truly qualifies as a tangent to the circle at \( P \).

Final Answer

The line \( AB \), drawn perpendicular to the radius \( OP \) at the point \( P \) on the circle of radius \( 2.7\ cm \), is the required tangent to the circle at \( P \).

Common Mistake

One common mistake: Students sometimes draw the perpendicular at the centre \( O \) instead of at the point \( P \) on the circumference — remember, the tangent must be perpendicular to the radius at the point of contact \( P \), not at the centre.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Mark centre \( O \). Draw a circle of radius \( 2.7\ cm \). Mark point \( P \) on the circumference.
  2. Step 2: Join \( O \) to \( P \) to form radius \( OP \).
  3. Step 3: At \( P \), construct a line \( AB \) such that \( OP \perp AB \) (i.e., \( \angle OPB = 90^\circ \)).

Answer: The line \( AB \), drawn perpendicular to the radius \( OP \) at the point \( P \) on the circle of radius \( 2.7\ cm \), is the required tangent to the circle at \( P \).

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 3.5 \text{ cm} \). Mark a point A on the circle and draw a tangent to the circle at point A. Write the steps of construction.

Solution: Steps of Construction: 1. Draw a circle with centre O and radius \( 3.5 \text{ cm} \) using a compass. 2. Mark any point A on the circumference of the circle. 3. Join O to A to draw the radius OA. The length OA \( = 3.5 \text{ cm} \). 4. At point A, draw a ray perpendicular to OA. To do this, place the compass at A and draw arcs on both sides of OA along the radius line, then construct the perpendicular bisector technique at A (or use a protractor to mark \( 90^{\circ} \) at A with respect to OA). 5. The line drawn through A perpendicular to OA is the required tangent to the circle at point A. \nJustification: Since the tangent to a circle is perpendicular to the radius at the point of contact, the line we constructed at A (which is perpendicular to OA) is indeed the tangent. It meets the circle at exactly one point, namely A.

Answer: A tangent is drawn at point A on the circle of radius \( 3.5 \text{ cm} \), perpendicular to the radius OA at A.

Example 2

Question: Draw a circle of radius \( 4.2 \text{ cm} \) with centre O. Take a point B on the circle such that the radius OB makes an angle of \( 60^{\circ} \) with the horizontal. Draw a tangent to the circle at point B. Write the steps of construction and justify why the construction is correct.

Solution: Steps of Construction: 1. Draw a horizontal line and mark a point O on it. 2. Using a compass, draw a circle with centre O and radius \( 4.2 \text{ cm} \). 3. Using a protractor, draw a ray from O making an angle of \( 60^{\circ} \) with the horizontal. Let this ray meet the circle at point B. 4. Join O and B. OB is the radius, and \( OB = 4.2 \text{ cm} \). 5. At point B, construct a perpendicular to OB. This can be done by: (a) Opening the compass to a convenient radius and drawing arcs on either side of B along line OB. (b) Without changing the compass width, draw arcs from both intersection points to get two new intersection points above and below the line. (c) Join these two new intersection points. This line passes through B and is perpendicular to OB. 6. The perpendicular line drawn at B is the required tangent to the circle at B. \nJustification: By the theorem, the tangent at any point of a circle is perpendicular to the radius through that point. Here, OB is the radius and the constructed line at B is perpendicular to OB, so by the converse of this theorem it is the tangent. The angle between OB and the tangent at B is \( 90^{\circ} \).

Answer: A tangent is drawn at point B on the circle of radius \( 4.2 \text{ cm} \), where OB makes \( 60^{\circ} \) with the horizontal. The tangent is perpendicular to OB at B.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius \( 3.5 \ cm \). Mark a point \( P \) on the circle. Construct a tangent to the circle at the point \( P \) and justify the construction.

Solution

  1. Step 1: Draw the Circle: Draw a circle with centre \( O \) and radius \( 3.5 \ cm \) using a compass.
  2. Step 2: Mark the Point of Tangency: Mark any point \( P \) on the circumference of the circle.
  3. Step 3: Draw the Radius: Join \( O \) and \( P \) to form the radius \( OP \).
  4. Step 4: Extend the Radius: Extend the line \( OP \) beyond the point \( P \) to a point \( Q \), so that \( O \), \( P \), and \( Q \) are collinear.
  5. Step 5: Construct the Perpendicular: With \( P \) as the centre, draw two arcs of equal radius on either side of the line \( OQ \), cutting it at points \( M \) and \( N \).
  6. Step 6: Draw Arcs from M and N: With centres \( M \) and \( N \), and using a radius greater than half of \( MN \), draw arcs on both sides of the line \( OQ \). Let the arcs intersect at points \( X \) and \( Y \).
  7. Step 7: Draw the Tangent: Join \( X \) and \( Y \). The line \( XY \) passes through \( P \) and is perpendicular to \( OP \). Label it as line \( AB \). This line \( AB \) is the required tangent to the circle at \( P \).
  8. Step 8: Justification: By construction, \( AB \perp OP \) at the point \( P \). Since the radius \( OP \) is perpendicular to the line \( AB \) at the point of contact \( P \), by the theorem that states a line perpendicular to the radius at its endpoint on the circle is a tangent, the line \( AB \) is indeed the tangent to the circle at \( P \).

Answer: The line \( AB \), drawn perpendicular to the radius \( OP \) at the point \( P \) on the circle of radius \( 3.5 \ cm \), is the required tangent to the circle at \( P \).

Everything you get with Solver7

More questions in Geometric Contructions