SOLVER7 Study. Nothing Else.
2026 Board Paper Q2

Draw a circle having radius \(3\ cm.\) Draw chord \(XY=5\ cm.\) Draw tangents to a circle at point \(X\) and \(Y\) without using centre.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle like a clock face. Draw a line across it connecting two points, call them \( X \) and \( Y \). Now pick any third point \( Z \) on the bigger curved part. The angle at \( Z \) looking at \( X \) and \( Y \) is like a secret key. Use that same angle at point \( X \) along the line, and you get a perfect tangent line touching the circle at \( X \). The same trick works at \( Y \). No centre needed at all!

Answer: Tangents at \( X \) and \( Y \) are drawn using the Alternate Segment Theorem: each tangent makes an angle with chord \( XY \) equal to the inscribed angle \( \angle XZY \) taken on the opposite arc.

📖 Tangents to a Circle at Points X and Y without Using the Centre

Detailed Explanation

When we know the centre of a circle, drawing a tangent at any point is easy: we draw a line perpendicular to the radius at that point. But if the centre is not to be used, we rely on the Tangent-Secant (Alternate Segment) Theorem. It states that the angle between a tangent to a circle and a chord drawn from the point of contact is equal to the angle subtended by the chord in the alternate segment of the circle. So if we take any point \( Z \) on the major arc and measure \( \angle XZY \), then the tangent at \( X \) will make the same angle with chord \( XY \) on the opposite side of the chord. The same idea gives the tangent at \( Y \).

Formula Used

Alternate Segment Theorem: \( \angle \text{between tangent and chord} = \angle \text{in the alternate segment} \)

Solution

  1. Step 1: Draw a circle of radius \( 3\ cm \) with any centre \( O \) (the centre is used only for drawing the circle, not for constructing the tangents).
  2. Step 2: With the help of a ruler, mark a chord \( XY \) of length \( 5\ cm \) inside the circle. Both points \( X \) and \( Y \) must lie on the circle.
  3. Step 3: Take any point \( Z \) on the major arc of the circle (the larger arc on one side of chord \( XY \)). Join \( ZX \) and \( ZY \) to form the inscribed angle \( \angle XZY \) in the alternate segment.
  4. Step 4: At point \( X \), on the side of chord \( XY \) opposite to \( Z \) (i.e., in the minor segment side), construct an angle equal to \( \angle XZY \) using chord \( XY \) as one arm. Extend this new arm on both sides of \( X \). This line is the tangent at \( X \), because by the Alternate Segment Theorem, the angle between tangent and chord equals the angle in the alternate segment.
  5. Step 5: Similarly, at point \( Y \), on the side of chord \( XY \) opposite to \( Z \), construct an angle equal to \( \angle XZY \) using chord \( YX \) as one arm. Extend this arm on both sides of \( Y \). This line is the tangent at \( Y \).
  6. Step 6: Label the two tangents. The tangent at \( X \) and the tangent at \( Y \) will meet at a point outside the circle (unless \( XY \) is a diameter, in which case they are parallel). The construction is complete without using the centre for tangent drawing.

Final Answer

Tangents at \( X \) and \( Y \) are drawn using the Alternate Segment Theorem: each tangent makes an angle with chord \( XY \) equal to the inscribed angle \( \angle XZY \) taken on the opposite arc.

Common Mistake

A common mistake is constructing the equal angle on the same side of the chord as point \( Z \). The tangent must be drawn on the side opposite to the alternate segment, otherwise the constructed line will act as a secant (cutting the circle) instead of a tangent.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle of radius \( 3 \) cm using a compass, marking its centre \( O \). — Reason: The centre \( O \) is needed only to draw the circle; it will NOT be used when constructing the tangents, so this step simply sets up our figure.
  2. Step 2: Using a ruler, mark two points \( X \) and \( Y \) on the circle such that the chord \( XY = 5 \) cm, and draw the chord \( XY \). — Reason: The chord \( XY \) is the reference line from which the tangent angles will be measured at each endpoint.
  3. Step 3: Select any point \( Z \) on the major arc (the larger arc on one side of chord \( XY \)). Draw line segments \( ZX \) and \( ZY \), forming the inscribed angle \( \angle XZY \) at \( Z \). Measure \( \angle XZY \) with a protractor. — Reason: By the Alternate Segment Theorem, this inscribed angle \( \angle XZY \) in the major arc equals the angle that each tangent makes with chord \( XY \) on the minor-arc side.
  4. Step 4: At point \( X \), on the side of chord \( XY \) that is opposite to \( Z \) (i.e., towards the minor arc), construct an angle equal to \( \angle XZY \) using \( XY \) as one arm. Draw the other arm of this angle through \( X \) — this line is the required tangent at \( X \). — Reason: The Alternate Segment Theorem guarantees that a line making angle \( \angle XZY \) with chord \( XY \) at the contact point \( X \) will be tangent to the circle, touching it at exactly one point.
  5. Step 5: At point \( Y \), on the side of chord \( XY \) opposite to \( Z \), construct an angle equal to \( \angle XZY \) using \( YX \) as one arm. Draw the other arm through \( Y \) — this line is the required tangent at \( Y \). — Reason: The same Alternate Segment Theorem applies symmetrically at \( Y \): the angle the tangent at \( Y \) makes with chord \( XY \) on the minor-arc side also equals the inscribed angle \( \angle XZY \).

Final Answer

Tangents at \( X \) and \( Y \) are drawn using the Alternate Segment Theorem: each tangent makes an angle with chord \( XY \) equal to the inscribed angle \( \angle XZY \) taken on the opposite arc.

Common Mistake

One common mistake: students construct the angle \( \angle XZY \) on the same side as \( Z \) (towards the major arc) instead of on the opposite side (towards the minor arc), which produces a secant line rather than a tangent.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle of radius \( 3 \) cm with centre \( O \); mark chord \( XY = 5 \) cm with both endpoints on the circle.
  2. Step 2: Mark point \( Z \) on the major arc; join \( ZX \) and \( ZY \) to form inscribed angle \( \angle XZY \) in the alternate segment.
  3. Step 3: At \( X \), on the minor-arc side of chord \( XY \), construct an angle equal to \( \angle XZY \) with \( XY \) as one arm; the other arm is the tangent at \( X \).
  4. Step 4: Repeat at \( Y \): construct angle \( \angle XZY \) on the minor-arc side with \( YX \) as one arm; the other arm is the tangent at \( Y \).

Answer: Tangents at \( X \) and \( Y \) are drawn using the Alternate Segment Theorem: each tangent makes an angle with chord \( XY \) equal to the inscribed angle \( \angle XZY \) taken on the opposite arc.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \ \(4 \text{ cm}\). Draw a chord \ \(AB = 6 \text{ cm}\). Without using the centre, draw tangents to the circle at points \ \(A\) and \ \(B\).

Solution: Step 1: Draw a circle with radius \ \(r = 4 \text{ cm}\) and mark its centre \ \(O\) (used only for drawing the circle, not for constructing tangents). \nStep 2: Draw a chord \ \(AB\) of length \ \(6 \text{ cm}\) inside the circle. \nStep 3: Take any point \ \(P\) on the major arc \ \(AB\). Join \ \(PA\) and \ \(PB\). The angle \ \(\angle APB\) is the inscribed angle in the major segment. \nStep 4: At point \ \(A\), draw a ray \ \(AT\) on the opposite side of chord \ \(AB\) from \ \(P\), such that \ \(\angle TAB = \angle APB\). By the tangent-chord angle theorem, \ \(AT\) is the tangent to the circle at \ \(A\). \nStep 5: Take a point \ \(Q\) on the minor arc \ \(AB\). The angle \ \(\angle AQB\) is the inscribed angle in the minor segment. \nStep 6: At point \ \(B\), draw a ray \ \(BS\) on the opposite side of chord \ \(AB\) from \ \(Q\), such that \ \(\angle SBA = \angle AQB\). Then \ \(BS\) is the tangent to the circle at \ \(B\). \nThe lines \ \(AT\) and \ \(BS\) are the required tangents at \ \(A\) and \ \(B\) respectively. Since the chord length \ \(6 \text{ cm}\) is less than the diameter \ \(2 \times 4 = 8 \text{ cm}\), the chord lies entirely within the circle and the construction is valid. The two tangents at \ \(A\) and \ \(B\) will meet at a point outside the circle, and the angle between them can be verified using the relation: \ \(\angle AOB = 2\arcsin\!\left(\dfrac{3}{4}\right)\) (since half the chord \ \(= 3 \text{ cm}\) and radius \ \(= 4 \text{ cm}\)).

Answer: Tangents at A and B are drawn using the tangent-chord angle equal to the inscribed angle in the alternate segment. The construction is valid since chord AB = 6 cm < diameter = 8 cm.

Example 2

Question: Draw a circle of radius \ \(3.5 \text{ cm}\). Draw a chord \ \(PQ = 5.6 \text{ cm}\). Without using the centre, draw tangents to the circle at points \ \(P\) and \ \(Q\). Also verify that the chord fits inside the circle.

Solution: Step 1: First verify that the chord fits inside the circle. The diameter is \ \(2 \times 3.5 = 7 \text{ cm}\). Since \ \(PQ = 5.6 \text{ cm} < 7 \text{ cm}\), the chord lies entirely within the circle. \nStep 2: Draw a circle with radius \ \(3.5 \text{ cm}\). \nStep 3: Draw chord \ \(PQ = 5.6 \text{ cm}\) inside the circle. \nStep 4: Mark a point \ \(R\) on the major arc \ \(PQ\). Join \ \(RP\) and \ \(RQ\). Measure \ \(\angle PRQ\) using a protractor. \nStep 5: At point \ \(P\), on the side of \ \(PQ\) opposite to \ \(R\), draw ray \ \(Pl\) such that \ \(\angle lPQ = \angle PRQ\). By the alternate segment theorem, \ \(Pl\) is the tangent at \ \(P\). \nStep 6: Mark a point \ \(S\) on the minor arc \ \(PQ\). Join \ \(SP\) and \ \(SQ\). Measure \ \(\angle PSQ\). \nStep 7: At point \ \(Q\), on the side of \ \(PQ\) opposite to \ \(S\), draw ray \ \(Qm\) such that \ \(\angle mQP = \angle PSQ\). Then \ \(Qm\) is the tangent at \ \(Q\). \nVerification: The distance of the chord from the centre is \ \(d = \sqrt{r^2 - \left(\dfrac{PQ}{2}\right)^2} = \sqrt{(3.5)^2 - (2.8)^2} = \sqrt{12.25 - 7.84} = \sqrt{4.41} = 2.1 \text{ cm}\). Since \ \(d = 2.1 \text{ cm} < r = 3.5 \text{ cm}\), the chord is valid and inside the circle.

Answer: Tangents at P and Q are constructed using the alternate segment theorem. The chord PQ = 5.6 cm is valid since it is less than the diameter 7 cm, and its distance from the centre is 2.1 cm.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius 4 cm. Draw a chord PQ of length 6 cm. Without using the centre of the circle, construct tangents to the circle at points P and Q. Describe each step of your construction clearly.

Solution

  1. Step 1: Draw the Circle: Using a compass, draw a circle of radius 4 cm. Mark the circle as shown.
  2. Step 2: Draw the Chord PQ: Mark a point P on the circle. Using a ruler and compass, mark point Q on the circle such that PQ = 6 cm. Draw the chord PQ.
  3. Step 3: Mark a Point on the Major Arc: Mark any point R on the major arc (the arc PQ not containing the chord side you will use). This point will help apply the Alternate Segment Theorem.
  4. Step 4: Measure the Inscribed Angle at R: Draw chords RP and RQ. Measure the inscribed angle \( \angle PRQ \) at point R using a protractor. By the Alternate Segment Theorem, the tangent at P makes an angle with chord PQ equal to \( \angle PRQ \) (the inscribed angle in the alternate segment), and similarly for Q.
  5. Step 5: Draw the Tangent at P: At point P, draw a line making an angle equal to \( \angle PRQ \) with the chord PQ on the side opposite to R. This line is the required tangent at P, by the Alternate Segment Theorem.
  6. Step 6: Draw the Tangent at Q: Similarly, at point Q, draw a line making an angle equal to \( \angle PRQ \) with the chord QP on the side opposite to R. This line is the required tangent at Q.
  7. Step 7: Verify: The two tangents at P and Q, when extended, will meet at a point (let us call it T) outside the circle. Since PQ = 6 cm and the radius is 4 cm, the tangents are not parallel, and the configuration can be verified by checking that each tangent touches the circle at exactly one point and is perpendicular to the radius at that point.

Answer: Tangents at P and Q are constructed without using the centre by applying the Alternate Segment Theorem: at each endpoint of chord PQ (length 6 cm) of the circle (radius 4 cm), draw a line making an angle with PQ equal to the inscribed angle \( \angle PRQ \) subtended by PQ in the alternate segment. These lines are the required tangents at P and Q respectively.

Everything you get with Solver7

More questions in Geometric Contructions