SOLVER7 Study. Nothing Else.
2024 Board Paper QB (i)

Construct a tangent to a circle with centre \(P\) and radius \(3.2\ cm\) at any point \(M\) on it.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a wheel rolling on a flat road. The road only touches the wheel at one tiny point. That touching line is called a tangent. Now, a spoke of the wheel goes from the centre to that same touching point. The spoke and the road always make a perfect corner, like the corner of a square. So to draw a tangent at any point on a circle, just draw the spoke to that point. Then draw a line making a perfect corner with the spoke at that point. That corner line is your tangent.

Answer: The line \( MN \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle at point \( M \).

📖 Tangent to a Circle at a Given Point on It

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property is: the tangent at any point on a circle is perpendicular to the radius drawn to that point. So, if we want to draw a tangent at a point \( M \) on a circle with centre \( P \), we just need to draw the radius \( PM \) and then construct a line through \( M \) that is perpendicular to \( PM \). That perpendicular line is the required tangent.

Formula Used

Tangent–Radius property: If a line touches a circle at point \( M \) and \( P \) is the centre, then tangent at \( M \) is perpendicular to radius \( PM \), i.e., tangent \( \perp PM \) at \( M \).

Solution

  1. Step 1: Draw the circle. With \( P \) as centre and radius \( 3.2 \text{ cm} \), draw a circle using a compass.
  2. Step 2: Mark any point \( M \) on the circle (anywhere on its boundary).
  3. Step 3: Join \( P \) and \( M \) using a ruler. The segment \( PM \) is a radius of the circle, so \( PM = 3.2 \text{ cm} \).
  4. Step 4: Construct a perpendicular to \( PM \) at the point \( M \). To do this, place the compass point at \( M \) and draw two small arcs cutting the line \( PM \) (extended if needed) on either side of \( M \). Call these intersection points \( A \) and \( B \).
  5. Step 5: With \( A \) as centre and radius more than \( \tfrac{1}{2} AB \), draw an arc above (or below) the line. With the same radius and \( B \) as centre, draw another arc intersecting the previous one at point \( N \).
  6. Step 6: Join \( M \) and \( N \), and extend the line on both sides. This line \( MN \) is perpendicular to \( PM \) at \( M \).
  7. Step 7: By the tangent–radius property, since \( MN \perp PM \) at the point \( M \) on the circle, the line \( MN \) is the required tangent to the circle at \( M \).

Final Answer

The line \( MN \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle at point \( M \).

Common Mistake

A very common mistake is drawing the tangent perpendicular to some other line (like a chord) instead of the radius \( PM \). Remember: the tangent at a point on the circle must be perpendicular to the radius at that exact point, not to any random line.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \( P \) and radius \( 3.2 \text{ cm} \) using a compass. — Reason: This sets up the circle on which we need to construct the tangent.
  2. Step 2: Mark any point \( M \) on the boundary (circumference) of the circle. — Reason: This is the point of contact where the tangent will touch the circle.
  3. Step 3: Use a ruler to join \( P \) and \( M \), forming the radius \( PM \) where \( PM = 3.2 \text{ cm} \). — Reason: The tangent–radius property tells us the tangent must be perpendicular to \( PM \), so we need this radius drawn first.
  4. Step 4: Place the compass tip at \( M \) and draw two small arcs that cut the line \( PM \) (extended if needed) on both sides of \( M \). Label these two intersection points \( A \) and \( B \). — Reason: Points \( A \) and \( B \) are equidistant from \( M \) along \( PM \), which is the first step in constructing a perpendicular at \( M \).
  5. Step 5: With compass tip at \( A \), open the compass to a radius greater than \( \frac{1}{2} AB \) and draw an arc above (or below) the line \( PM \). Keeping the same compass width, place the tip at \( B \) and draw another arc so that it intersects the previous one. Label the intersection point \( N \). — Reason: The point \( N \) is equidistant from both \( A \) and \( B \), which guarantees that \( MN \perp PM \).
  6. Step 6: Draw a straight line through \( M \) and \( N \) using a ruler. This line \( MN \) is perpendicular to \( PM \) at the point \( M \), meaning \( \angle PMN = 90^{\circ} \). — Reason: By the tangent–radius property, any line through \( M \) that is perpendicular to radius \( PM \) is the tangent to the circle at \( M \).

Final Answer

The line \( MN \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle at point \( M \).

Common Mistake

One common mistake: Students sometimes draw the perpendicular at the centre \( P \) instead of at the point \( M \) on the circle — always construct the perpendicular at the point of contact \( M \), not at any other point on the radius.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( P \) and radius \( 3.2 \) cm. Mark a point \( M \) on the circle.
  2. Step 2: Join \( P \) and \( M \); the segment \( PM = 3.2 \) cm is the radius.
  3. Step 3: At \( M \), construct a perpendicular to \( PM \): place the compass at \( M \), mark arcs at points \( A \) and \( B \) on line \( PM \), then with equal radii from \( A \) and \( B \) draw intersecting arcs to locate point \( N \).
  4. Step 4: Draw line \( MN \) through \( M \) and \( N \); since \( MN \perp PM \), line \( MN \) is the required tangent.

Answer: The line \( MN \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle at point \( M \).

➕ More Examples

More Examples

Example 1

Question: Construct a tangent to a circle with centre O and radius 4.5 cm at a point A on it.

Solution: Step 1: Draw a circle with centre O and radius \( 4.5 \) cm using a compass. \nStep 2: Mark any point A on the circle. \nStep 3: Join O to A to form the radius OA. We have \( OA = 4.5 \text{ cm} \). \nStep 4: At point A, construct a line perpendicular to OA. To do this, place the compass at A, draw arcs on both sides of OA along the line OA extended, and then draw arcs from those two points to find the perpendicular direction. \nStep 5: Draw the perpendicular line through A. This line is the required tangent to the circle at point A. \nVerification: Since the tangent at any point on a circle is perpendicular to the radius at that point, the angle OAT (where T is any point on the tangent) equals \( 90^\circ \), confirming the construction is correct.

Answer: A tangent is constructed at point A on the circle with centre O and radius 4.5 cm, perpendicular to OA at A.

Example 2

Question: A circle has centre Q and radius 2.8 cm. Point R lies on the circle. Construct the tangent to the circle at point R.

Solution: Step 1: Draw a circle with centre Q and radius \( 2.8 \text{ cm} \) using a compass. \nStep 2: Mark a point R on the circumference of the circle. \nStep 3: Draw the radius QR. We note that \( QR = 2.8 \text{ cm} \). \nStep 4: Extend QR beyond R (if needed) to make it easier to erect a perpendicular at R. \nStep 5: Using a compass, place it at R and draw two arcs of equal radius on the line QR (one on each side of R) to get points, say X and Y, such that \( RX = RY \). \nStep 6: Increase the compass width. Draw arcs from X and from Y so that they intersect at a point, say S. \nStep 7: Join R to S. The line RS is perpendicular to QR at R, so it is the required tangent. \nVerification: By construction, \( \angle QRS = 90^\circ \), which satisfies the condition that the tangent is perpendicular to the radius at the point of contact.

Answer: A tangent is constructed at point R on the circle with centre Q and radius 2.8 cm, perpendicular to QR at R.

🎯 Try a Similar Question

Try a Similar Question

Question: Construct a tangent to a circle with centre O and radius 4.5 cm at a point Q on the circle. Name the tangent line and state the angle it makes with the radius OQ.

Solution

  1. Step 1: Draw the Circle: Using a compass, draw a circle with centre O and radius \ \( 4.5 \text{ cm} \). Mark the centre clearly as O.
  2. Step 2: Mark the Point of Tangency: Mark any point Q on the circumference of the circle. This is the point at which the tangent is to be constructed.
  3. Step 3: Draw the Radius OQ: Join the centre O to the point Q using a ruler. The line segment OQ is the radius at the point of tangency, and its length is \( 4.5 \text{ cm} \).
  4. Step 4: Construct the Perpendicular at Q: At point Q, construct a line perpendicular to OQ. To do this, place the compass at Q and draw arcs on both sides along OQ. Then, from each arc intersection, draw further arcs that intersect each other above (and below) Q. Join these two intersection points to get the perpendicular line through Q.
  5. Step 5: Name the Tangent: Label the perpendicular line drawn through Q as line TT'. This line TT' is the required tangent to the circle at point Q.
  6. Step 6: State the Angle: By the property of tangents, the tangent TT' is perpendicular to the radius OQ at the point Q. Therefore, the angle between OQ and TT' is \( 90^\circ \).

Answer: The line TT' drawn through Q perpendicular to the radius OQ is the required tangent to the circle at point Q. The tangent TT' makes an angle of \( 90^\circ \) with the radius OQ at the point of contact Q.

Everything you get with Solver7

More questions in Geometric Contructions