SOLVER7 Study. Nothing Else.
2023 Board Paper QB (iii)

Draw a circle of radius \(3.3\ cm.\) Draw a chord \(PQ\) of length \(6.6\ cm.\) Draw tangents to the circle at points \(P\) and \(Q.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a round clock face with a centre point O. Now draw a straight line through the middle of the clock, touching both edges — that line is like a diameter. Here, the circle has a radius of \( 3.3 \) cm, so the diameter is \( 6.6 \) cm, which is exactly the length of chord PQ. At each edge point, a tangent is like a flat wall just touching the circle. Both walls stand perfectly upright against the same line, so they never meet — they are parallel to each other.

Answer: The required figure has a circle of radius \( 3.3 \) cm with centre O, a chord (in fact diameter) PQ of length \( 6.6 \) cm through O, and two tangents at P and Q which are both perpendicular to PQ and hence parallel to each other.

📖 Construction: Circle with Chord and Tangents at Chord Endpoints

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. A very important property is: the tangent at any point on a circle is perpendicular to the radius drawn to that point. So, to draw a tangent at a given point on the circle, we simply draw a line through that point which is perpendicular to the radius at that point. Also, notice that the chord PQ has length 6.6 cm, which is exactly the diameter of the circle (since diameter \( = 2 \times 3.3 = 6.6 \) cm). This means PQ passes through the centre O, so P and Q are the two endpoints of a diameter. Because of this, the tangents at P and Q will both be perpendicular to the same diameter PQ, and hence they will be parallel to each other.

Formula Used

Tangent at a point on a circle is perpendicular to the radius at that point: \( \text{Tangent} \perp \text{Radius} \). Also, diameter \( = 2r \).

Solution

  1. Step 1: Draw the circle. Mark a point O on the paper as the centre. With O as the centre and radius \( 3.3 \) cm (using a compass), draw a circle.
  2. Step 2: Observe the length of the chord. The chord PQ has length \( 6.6 \) cm and the diameter of the circle is \( 2 \times 3.3 = 6.6 \) cm. Since the chord equals the diameter, PQ must be a diameter of the circle, and it must pass through the centre O.
  3. Step 3: Draw the chord PQ. Draw any straight line through the centre O. Mark the two points where this line cuts the circle as P and Q. Then PQ is a diameter of length \( 6.6 \) cm, which is our required chord.
  4. Step 4: Draw the tangent at P. Since the tangent at P must be perpendicular to the radius OP (which lies along line PQ), place your set-square or protractor at P and draw a line through P that makes an angle of \( 90^\circ \) with PQ. Call this line \( l_1 \). This line \( l_1 \) is the required tangent at P.
  5. Step 5: Draw the tangent at Q. Similarly, at point Q, draw a line perpendicular to PQ using a set-square or protractor. Call this line \( l_2 \). This line \( l_2 \) is the required tangent at Q.
  6. Step 6: Verify the construction. Both \( l_1 \) and \( l_2 \) are perpendicular to the same line PQ, so they are parallel to each other. Also, each of them touches the circle at exactly one point (P and Q respectively), confirming that they are tangents.

Final Answer

The required figure has a circle of radius \( 3.3 \) cm with centre O, a chord (in fact diameter) PQ of length \( 6.6 \) cm through O, and two tangents at P and Q which are both perpendicular to PQ and hence parallel to each other.

Common Mistake

A very common mistake is not noticing that a chord of length 6.6 cm in a circle of radius 3.3 cm is actually the diameter. Students often try to draw an arbitrary chord of 6.6 cm not passing through the centre, which is geometrically impossible here (the maximum chord length equals the diameter). Always compare the chord length with \( 2r \) before starting the construction.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Calculate the diameter of the circle using the given radius \( r = 3.3 \) cm. Diameter \[ d = 2 \times 3.3 = 6.6 \text{ cm} \] Reason: Comparing this with the given chord length of \( 6.6 \) cm tells us whether the chord is a diameter.
  2. Step 2: Notice that the chord length \( 6.6 \) cm equals the diameter \( 6.6 \) cm. Since no chord can be longer than the diameter, a chord equal to the diameter must itself be a diameter, passing through the centre O. Reason: This key observation means P, O, and Q are collinear, which simplifies drawing the tangents.
  3. Step 3: Mark a point O on your paper as the centre. Set the compass to \( 3.3 \) cm and draw a circle with centre O and radius \( 3.3 \) cm. Reason: This gives us the required circle on which the chord and tangents will be constructed.
  4. Step 4: Draw any straight line through O and mark the two points where this line meets the circle as P and Q. The segment PQ is a diameter of length \[ PQ = 6.6 \text{ cm} \] Reason: Because the line passes through the centre, the intercepted chord is automatically a diameter of the correct length.
  5. Step 5: At point P, draw a line perpendicular to PQ (i.e., perpendicular to the diameter at P). Since the radius OP lies along PQ, and Tangent \( \perp \) Radius, this perpendicular line is the tangent at P. Reason: The tangent-radius perpendicularity property guarantees this line touches the circle only at P.
  6. Step 6: At point Q, draw another line perpendicular to PQ in the same way. This is the tangent at Q. Both tangents are perpendicular to the same line PQ, so by geometry, the two tangents are parallel to each other. Reason: Two lines each perpendicular to the same line must be parallel to one another.

Final Answer

The required figure has a circle of radius \( 3.3 \) cm with centre O, a chord (in fact diameter) PQ of length \( 6.6 \) cm through O, and two tangents at P and Q which are both perpendicular to PQ and hence parallel to each other.

Common Mistake

One common mistake: students assume the chord PQ is just an ordinary chord and try to draw it somewhere away from the centre, not realising that a chord of length equal to the diameter must pass through the centre O, making it a diameter.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre O and radius \( 3.3 \) cm.
  2. Step 2: Since chord \( PQ = 6.6 \) cm \( = 2 \times 3.3 \) cm \( = \) diameter, draw PQ as a diameter through O, marking endpoints P and Q on the circle.
  3. Step 3: At P, draw a tangent perpendicular to OP; at Q, draw a tangent perpendicular to OQ. Both tangents are perpendicular to PQ, so they are parallel to each other.

Answer: The required figure has a circle of radius \( 3.3 \) cm with centre O, a chord (in fact diameter) PQ of length \( 6.6 \) cm through O, and two tangents at P and Q which are both perpendicular to PQ and hence parallel to each other.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 4.5 \) cm. Draw a chord \( AB \) of length \( 9 \) cm. Then draw tangents to the circle at points \( A \) and \( B \). What is the relationship between the two tangents? Justify your answer.

Solution: First, note that the diameter of the circle is \( 2 \times 4.5 = 9 \) cm. Since the chord \( AB = 9 \) cm equals the diameter, \( AB \) is itself a diameter of the circle and passes through the centre \( O \). \nConstruction steps: 1. Draw a circle with centre \( O \) and radius \( 4.5 \) cm. 2. Draw diameter \( AB \) (a chord of length \( 9 \) cm) passing through \( O \). 3. At point \( A \): draw \( OA \). Construct a line perpendicular to \( OA \) at \( A \). This is the tangent \( t_1 \) at \( A \). 4. At point \( B \): draw \( OB \). Construct a line perpendicular to \( OB \) at \( B \). This is the tangent \( t_2 \) at \( B \). \nJustification: Since \( OA \) and \( OB \) are opposite rays along the same straight line (the diameter), and \( t_1 \perp OA \) while \( t_2 \perp OB \), both tangents are perpendicular to the same line \( AB \). Therefore \( t_1 \parallel t_2 \).

Answer: The two tangents at \( A \) and \( B \) are parallel to each other, because \( AB \) is a diameter and each tangent is perpendicular to the diameter at its endpoint.

Example 2

Question: Draw a circle of radius \( 2.8 \) cm. Draw a chord \( XY \) of length \( 5.6 \) cm. Construct tangents to the circle at \( X \) and \( Y \). Describe the angle between the two tangents and give a reason.

Solution: First, find the diameter: \( 2 \times 2.8 = 5.6 \) cm. Since chord \( XY = 5.6 \) cm equals the diameter, \( XY \) is a diameter passing through the centre \( O \). \nConstruction steps: 1. Draw a circle with centre \( O \) and radius \( 2.8 \) cm. 2. Draw diameter \( XY \) (chord of length \( 5.6 \) cm) through \( O \). 3. At \( X \): construct a perpendicular to \( OX \) at \( X \). Label this tangent \( t_1 \). 4. At \( Y \): construct a perpendicular to \( OY \) at \( Y \). Label this tangent \( t_2 \). \nNow consider the angle between \( t_1 \) and \( t_2 \). Since \( t_1 \perp XY \) and \( t_2 \perp XY \), the tangents never meet; they are parallel. The angle between two parallel lines is \( 0^\circ \) (they do not intersect), or equivalently the lines are at \( 180^\circ \) to each other when considering co-interior angles summing to \( 180^\circ \). In standard geometric terms, the tangents are parallel and the angle between them is \( 0^\circ \) (no intersection). \nReason: A tangent is perpendicular to the radius at the point of tangency. Both radii \( OX \) and \( OY \) lie along the same line (the diameter), so both tangents are perpendicular to this same line and hence parallel.

Answer: The two tangents at \( X \) and \( Y \) are parallel (they do not meet), because \( XY \) is a diameter and both tangents are perpendicular to the same line \( XY \).

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius 4 cm. Draw a chord AB of length 4 cm. Draw tangents to the circle at points A and B. Verify whether the tangents are parallel or meet at a point, and find the angle between the two radii OA and OB.

Solution

  1. Step 1: Draw the circle: Mark a centre O and draw a circle of radius 4 cm.
  2. Step 2: Draw chord AB of length 4 cm: Mark a point A on the circle. With A as centre and radius 4 cm, mark the second point B on the circle. Join AB. This is the chord of length 4 cm.
  3. Step 3: Identify triangle OAB: Since OA = OB = 4 cm (radii) and AB = 4 cm (chord), triangle OAB is equilateral. Therefore each angle of triangle OAB is \( 60^{\circ} \). In particular, \( \angle AOB = 60^{\circ} \).
  4. Step 4: Draw tangent at A: At point A, draw a line perpendicular to the radius OA. This line is the tangent to the circle at A.
  5. Step 5: Draw tangent at B: At point B, draw a line perpendicular to the radius OB. This line is the tangent to the circle at B.
  6. Step 6: Check whether tangents are parallel: The two tangents are parallel only when the chord is a diameter, i.e. when \( \angle AOB = 180^{\circ} \). Here \( \angle AOB = 60^{\circ} \), so the tangents are NOT parallel; they meet at an external point P.
  7. Step 7: Find the angle between the tangents: In quadrilateral OAPB, the angles at A and B are each \( 90^{\circ} \) (tangent-radius property). The sum of all four angles is \( 360^{\circ} \). So the angle at P is \[ \angle APB = 360^{\circ} - 90^{\circ} - 90^{\circ} - 60^{\circ} = 120^{\circ}. \]

Answer: The required figure has a circle of radius 4 cm with centre O and a chord AB of length 4 cm. Triangle OAB is equilateral, so \( \angle AOB = 60^{\circ} \). The tangents at A and B are not parallel; they meet at an external point P, and the angle between them is \( \angle APB = 120^{\circ} \).

Everything you get with Solver7

More questions in Geometric Contructions