SOLVER7 Study. Nothing Else.
2019 Board Paper Q3

Draw a circle with radius \(4.2\ cm.\) Construct tangents to the circle from a point at a distance of \(7\ cm\) from the centre.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle drawn on paper, like a round cookie. Now put a dot outside the cookie. You can draw exactly two straight lines from that dot, each just barely touching the edge of the cookie. Those touching lines are called tangents. The circle here has a radius of \( 4.2 \) cm, and the dot outside is \( 7 \) cm away from the centre. Each touching line turns out to be \( 5.6 \) cm long. The dot and the two touching points form a neat triangle shape.

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are constructed from the external point \( P \) to the circle of radius \( 4.2\ cm \), and each tangent has length \( 5.6\ cm \).

📖 Construction of Tangents from an External Point

Detailed Explanation

When a point lies outside a circle, exactly two tangents can be drawn from that point to the circle. The key geometric idea is that the tangent to a circle is always perpendicular to the radius drawn to the point of contact. So if \( P \) is an external point and \( O \) is the centre, then at the point of contact \( T \), the angle \( \angle OTP = 90^\circ \). This means \( T \) lies on a circle whose diameter is \( OP \) (angle in a semicircle is \( 90^\circ \)). This is the principle used in the construction: we draw a circle on \( OP \) as diameter, and its intersection points with the original circle give the two points of contact.

Formula Used

Length of tangent from an external point: \( PT = \sqrt{OP^2 - r^2} \). Here \( PT = \sqrt{7^2 - 4.2^2} = \sqrt{49 - 17.64} = \sqrt{31.36} = 5.6\ cm \).

Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( 4.2\ cm \) using a compass.
  2. Step 2: Mark a point \( P \) outside the circle such that \( OP = 7\ cm \). Join \( O \) and \( P \) with a straight line.
  3. Step 3: Find the midpoint \( M \) of segment \( OP \). To do this, draw arcs of radius more than half of \( OP \) from both \( O \) and \( P \); these arcs intersect at two points. Join those two points; the line cuts \( OP \) at its midpoint \( M \). Since \( OP = 7\ cm \), we get \( OM = MP = 3.5\ cm \).
  4. Step 4: With \( M \) as centre and radius \( MO = MP = 3.5\ cm \), draw a circle. This new circle passes through both \( O \) and \( P \), so \( OP \) is its diameter.
  5. Step 5: This second circle intersects the original circle at two points. Name them \( T_1 \) and \( T_2 \). These are the required points of contact. This works because any angle inscribed in a semicircle is \( 90^\circ \), so \( \angle OT_1P = \angle OT_2P = 90^\circ \), which is exactly the condition for a tangent.
  6. Step 6: Join \( P \) to \( T_1 \) and \( P \) to \( T_2 \). The line segments \( PT_1 \) and \( PT_2 \) are the required tangents to the original circle from the external point \( P \).
  7. Step 7: Verify by measuring: both \( PT_1 \) and \( PT_2 \) should measure approximately \( 5.6\ cm \), which matches the calculation \( PT = \sqrt{OP^2 - r^2} = \sqrt{49 - 17.64} = 5.6\ cm \).

Final Answer

Two tangents \( PT_1 \) and \( PT_2 \) are constructed from the external point \( P \) to the circle of radius \( 4.2\ cm \), and each tangent has length \( 5.6\ cm \).

Common Mistake

A very common mistake is drawing the second (helper) circle with a wrong radius — students sometimes use \( OP = 7\ cm \) as the radius instead of \( 3.5\ cm \). Remember, \( OP \) must be the diameter of the helper circle, so its radius is half of \( OP \), i.e. \( 3.5\ cm \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( 4.2 \) cm using a compass. — Reason: This is the given circle to which we need to construct tangents from an outside point.
  2. Step 2: Locate an external point \( P \) such that the distance \( OP = 7 \) cm, and draw segment \( OP \). — Reason: The problem specifies that P lies 7 cm from the centre, so we must fix this distance precisely before any further construction.
  3. Step 3: Find the midpoint \( M \) of \( OP \) by drawing intersecting arcs (with radius greater than half of \( OP \)) from both \( O \) and \( P \), then joining the two arc-intersection points. This crossing line meets \( OP \) at \( M \), giving \( OM = MP = 3.5 \) cm. — Reason: We need the midpoint because the next circle must be centred at \( M \) and must pass through both \( O \) and \( P \), using \( OP \) as its diameter.
  4. Step 4: With \( M \) as centre and radius \( 3.5 \) cm, draw a second (auxiliary) circle. This circle passes through both \( O \) and \( P \). — Reason: By Thales' theorem, any point on a circle with diameter \( OP \) subtends a right angle at the diameter's endpoints. So any intersection of this auxiliary circle with the original circle will automatically create a \( 90^\circ \) angle, satisfying the tangency condition.
  5. Step 5: Mark the two points where the auxiliary circle intersects the original circle; call them \( T_1 \) and \( T_2 \). — Reason: At each of these points, the angle \( \angle OT_1P = \angle OT_2P = 90^\circ \), confirming that \( PT_1 \) and \( PT_2 \) are perpendicular to the respective radii, i.e., they are tangents.
  6. Step 6: Join \( P \) to \( T_1 \) and \( P \) to \( T_2 \) with straight lines. These are the two required tangents. — Reason: Connecting P to each point of tangency completes the construction; the lines touch the original circle at exactly one point each.
  7. Step 7: Verify the tangent length by calculation. Using the Pythagoras theorem in right triangle \( OT_1P \): \[ PT_1 = \sqrt{OP^2 - OT_1^2} = \sqrt{7^2 - 4.2^2} = \sqrt{49 - 17.64} = \sqrt{31.36} = 5.6 \text{ cm} \] — Reason: Since \( \angle OT_1P = 90^\circ \), triangle \( OT_1P \) is right-angled at \( T_1 \), so Pythagoras applies directly and confirms the measured tangent length.

Final Answer

Two tangents \( PT_1 \) and \( PT_2 \) are constructed from the external point \( P \) to the circle of radius \( 4.2\ cm \), and each tangent has length \( 5.6\ cm \).

Common Mistake

One common mistake: Students often forget that the auxiliary (helper) circle must have OP as its full diameter — not just any chord — so its centre must be exactly at the midpoint M of OP with radius 3.5 cm; using an incorrect centre shifts the intersection points and the 90° angle property no longer holds.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = 4.2 \) cm, \( OP = 7 \) cm. Draw circle with centre \( O \), radius \( 4.2 \) cm; mark external point \( P \) with \( OP = 7 \) cm.
  2. Step 2: Bisect \( OP \) to get midpoint \( M \) where \( OM = MP = 3.5 \) cm. Draw a circle with centre \( M \) and radius \( 3.5 \) cm; mark its intersections with the original circle as \( T_1 \) and \( T_2 \).
  3. Step 3: Join \( PT_1 \) and \( PT_2 \) — these are the required tangents. Verify: \( PT = \sqrt{7^2 - 4.2^2} = \sqrt{49 - 17.64} = \sqrt{31.36} = 5.6 \) cm.

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are constructed from the external point \( P \) to the circle of radius \( 4.2\ cm \), and each tangent has length \( 5.6\ cm \).

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius 3.5 cm. From a point 8 cm away from its centre, construct the two tangents to the circle. Also calculate the length of each tangent.

Solution: Step 1 — Draw the circle. Draw a circle with centre O and radius \( r = 3.5 \) cm. \nStep 2 — Mark the external point. Mark point P such that \( OP = 8 \) cm. \nStep 3 — Find the midpoint. Find midpoint M of OP, so \( OM = 4 \) cm. \nStep 4 — Draw the auxiliary circle. With centre M and radius \( MP = 4 \) cm, draw a circle. This circle has OP as its diameter. \nStep 5 — Mark intersection points. Let the auxiliary circle intersect the original circle at points T1 and T2. \nStep 6 — Draw tangents. Join P to T1 and P to T2. These are the required tangents to the circle. \nVerification: Since OP is the diameter of the auxiliary circle, \( \angle OT_1P = 90^\circ \), confirming PT1 is a tangent. \nCalculation of tangent length: Using the formula, the length of each tangent is \[ PT = \sqrt{d^2 - r^2} \]\nSubstituting \( d = 8 \) cm and \( r = 3.5 \) cm: \[ PT = \sqrt{8^2 - 3.5^2} \] \[ PT = \sqrt{64 - 12.25} \] \[ PT = \sqrt{51.75} \] \[ PT \approx 7.19 \text{ cm} \]

Answer: Each tangent length \( \approx 7.19 \) cm

Example 2

Question: A circle has its centre at point O and a radius of 5 cm. Point Q is located 13 cm from O. Construct the tangents from Q to the circle and find the length of each tangent.

Solution: Step 1 — Draw the circle. Draw a circle with centre O and radius \( r = 5 \) cm. \nStep 2 — Mark the external point. Mark point Q such that \( OQ = 13 \) cm. \nStep 3 — Find the midpoint. Find midpoint M of OQ, so \( OM = 6.5 \) cm. \nStep 4 — Draw the auxiliary circle. With centre M and radius \( MQ = 6.5 \) cm, draw a circle whose diameter is OQ. \nStep 5 — Mark intersection points. Let the auxiliary circle meet the original circle at points A and B. \nStep 6 — Draw tangents. Join Q to A and Q to B. These are the required tangents. \nVerification: Since OQ is a diameter of the auxiliary circle, \( \angle OAQ = 90^\circ \), so QA is indeed tangent to the original circle at A. Similarly for QB. \nCalculation of tangent length: The length of each tangent is \[ QT = \sqrt{d^2 - r^2} \]\nSubstituting \( d = 13 \) cm and \( r = 5 \) cm: \[ QT = \sqrt{13^2 - 5^2} \] \[ QT = \sqrt{169 - 25} \] \[ QT = \sqrt{144} \] \[ QT = 12 \text{ cm} \]

Answer: Each tangent length \( = 12 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius \( 3\ cm \). From a point \( P \) at a distance of \( 5\ cm \) from the centre \( O \), construct the two tangents \( PT_1 \) and \( PT_2 \) to the circle. Also find the length of each tangent.

Solution

  1. Step 1 – Draw the given circle: Draw a point \( O \) and, using a compass, draw a circle of radius \( r = 3\ cm \) centred at \( O \).
  2. Step 2 – Mark the external point: Mark a point \( P \) outside the circle such that \( OP = 5\ cm \). (Measure 5 cm from \( O \) along a convenient ray and mark \( P \).)
  3. Step 3 – Find the midpoint of OP: Using a compass (or ruler), find the midpoint \( M \) of segment \( OP \), so that \( OM = MP = 2.5\ cm \).
  4. Step 4 – Draw the auxiliary circle: With \( M \) as centre and radius \( OM = 2.5\ cm \), draw an auxiliary circle. This circle has \( OP \) as its diameter.
  5. Step 5 – Mark the points of tangency: Let the auxiliary circle intersect the original circle (radius \( 3\ cm \)) at points \( T_1 \) and \( T_2 \). These are the required points of tangency.
  6. Step 6 – Draw the tangents: Join \( P \) to \( T_1 \) and \( P \) to \( T_2 \). The lines \( PT_1 \) and \( PT_2 \) are the required tangents to the circle from the external point \( P \).
  7. Step 7 – Verify with the tangent-length formula: Using the formula for the length of a tangent, where \( OP = 5\ cm \) and \( r = 3\ cm \): \[ PT = \sqrt{OP^2 - r^2} \] Substituting the values: \[ PT = \sqrt{5^2 - 3^2} = \sqrt{25 - 9} = \sqrt{16} = 4\ cm \] So each tangent has length \( 4\ cm \).
  8. Step 8 – Verify the right angle: By construction, \( OT_1 \perp PT_1 \) and \( OT_2 \perp PT_2 \), which can be verified since \( \angle OT_1P \) lies in a semicircle of the auxiliary circle (angle in a semicircle = \( 90 \circ \)). This confirms the tangency.

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are constructed from the external point \( P \) to the circle of radius \( 3\ cm \), and each tangent has length \( 4\ cm \).

Everything you get with Solver7

More questions in Geometric Contructions