SOLVER7 Study. Nothing Else.
Practice Set 10.1 Q3

\(\Delta RST\sim \Delta XYZ.\) In \(\Delta RST,\) \(RS = 4.5 cm,\ \angle RST=40^\circ,\ ST=5.7\ cm\) Construct \(\Delta RST\) and \(\Delta XYZ,\) such that \(\dfrac{RS}{XY}=\dfrac{3}{5}.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a small drawing of a triangle and you want to make a bigger copy of it. The big copy looks exactly the same shape, just stretched out. Here, the small triangle is \( \Delta RST \) and the big copy is \( \Delta XYZ \). Every side of the big triangle is a little more than one and a half times the matching side of the small one. The angle stays the same, like zooming in on a photo without tilting it.

Answer: \(\Delta XYZ\) is the required triangle similar to \(\Delta RST\), with \(XY = 7.5\) cm, \(YZ = 9.5\) cm, and \(\angle XYZ = 40^\circ\), such that \(\dfrac{RS}{XY} = \dfrac{3}{5}\).

📖 Construction of Similar Triangles (Scale Factor 3/5)

Detailed Explanation

When two triangles are similar, their corresponding sides are in the same ratio. Here, \(\Delta RST \sim \Delta XYZ\) with \(\dfrac{RS}{XY} = \dfrac{3}{5}\). This means \(\Delta XYZ\) is larger than \(\Delta RST\) (since XY is bigger than RS). To construct \(\Delta XYZ\), we first draw \(\Delta RST\) using the given measurements (SAS construction), then use the division of a line segment in a given ratio to locate the vertices of \(\Delta XYZ\). The scale factor tells us that each side of \(\Delta XYZ\) is \(\dfrac{5}{3}\) times the corresponding side of \(\Delta RST\).

Formula Used

If \(\Delta RST \sim \Delta XYZ\), then \(\dfrac{RS}{XY} = \dfrac{ST}{YZ} = \dfrac{RT}{XZ} = \dfrac{3}{5}\).

Solution

  1. Step 1: Analyse the given data: In \(\Delta RST\), \(RS = 4.5\) cm, \(\angle RST = 40^\circ\), \(ST = 5.7\) cm. Since \(\dfrac{RS}{XY} = \dfrac{3}{5}\), \(\Delta XYZ\) will be larger. The scale factor is \(\dfrac{5}{3}\), so we will need 5 equal divisions on the ray.
  2. Step 2: Construct \(\Delta RST\). Draw segment \(ST = 5.7\) cm. At point S, construct \(\angle RST = 40^\circ\) using a protractor. Along this ray, mark point R such that \(SR = 4.5\) cm. Join R and T to complete \(\Delta RST\).
  3. Step 3: Locate the base vertices of \(\Delta XYZ\). Since Y corresponds to S and \(\angle Y = \angle S = 40^\circ\), we construct \(\Delta XYZ\) on side ST extended. Rename S as Y (common vertex used for construction). From Y (i.e. S), draw a ray \(YB\) making an acute angle with YT (on the side opposite to R).
  4. Step 4: On ray \(YB\), mark 5 equal points \(B_1, B_2, B_3, B_4, B_5\) such that \(YB_1 = B_1B_2 = B_2B_3 = B_3B_4 = B_4B_5\). We chose 5 because the larger number in the ratio \(\dfrac{3}{5}\) is 5.
  5. Step 5: Join \(B_3\) to T (the 3rd point, since 3 is the numerator). Through \(B_5\), draw a line parallel to \(B_3T\), meeting the extension of YT at point Z. By the Basic Proportionality Theorem, \(\dfrac{YT}{YZ} = \dfrac{3}{5}\), so \(YZ = \dfrac{5}{3} \times 5.7 = 9.5\) cm.
  6. Step 6: Through Z, draw a line parallel to TR, meeting the extension of ray YR at point X. Then \(\Delta XYZ\) is the required triangle similar to \(\Delta RST\) with \(\dfrac{RS}{XY} = \dfrac{3}{5}\). The computed lengths are \(XY = \dfrac{5}{3} \times 4.5 = 7.5\) cm and \(YZ = 9.5\) cm, with \(\angle XYZ = 40^\circ\).

Final Answer

\(\Delta XYZ\) is the required triangle similar to \(\Delta RST\), with \(XY = 7.5\) cm, \(YZ = 9.5\) cm, and \(\angle XYZ = 40^\circ\), such that \(\dfrac{RS}{XY} = \dfrac{3}{5}\).

Common Mistake

A common mistake is to mark only 3 equal divisions on the auxiliary ray (using the numerator instead of the larger number). Since the scale factor \(\dfrac{3}{5} < 1\) makes \(\Delta XYZ\) larger, you must mark 5 points and join the 3rd point to T, then draw a parallel through the 5th point to enlarge the triangle correctly.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read the given data carefully: \(RS = 4.5\) cm, \(\angle RST = 40^\circ\), \(ST = 5.7\) cm, and \(\dfrac{RS}{XY} = \dfrac{3}{5}\). — Reason: Identifying the ratio \(\dfrac{3}{5}\) tells us \(\Delta XYZ\) is larger than \(\Delta RST\), and that the scale factor we apply to each side of \(\Delta RST\) is \(\dfrac{5}{3}\).
  2. Step 2: Find the side lengths of \(\Delta XYZ\) using the scale factor. For side \(XY\): \[XY = RS \times \dfrac{5}{3} = 4.5 \times \dfrac{5}{3} = 7.5 \text{ cm}\] For side \(YZ\): \[YZ = ST \times \dfrac{5}{3} = 5.7 \times \dfrac{5}{3} = 9.5 \text{ cm}\] The included angle stays the same: \(\angle XYZ = \angle RST = 40^\circ\). — Reason: Since the triangles are similar, every side of \(\Delta XYZ\) is exactly \(\dfrac{5}{3}\) times the corresponding side of \(\Delta RST\), while all angles are preserved.
  3. Step 3: Construct \(\Delta RST\) using SAS. Draw segment \(ST = 5.7\) cm. At point \(S\), use a protractor to mark \(\angle RST = 40^\circ\). Along the angle ray, measure \(SR = 4.5\) cm and mark point \(R\). Join \(R\) to \(T\) to complete \(\Delta RST\). — Reason: We build the smaller triangle first because the construction of \(\Delta XYZ\) uses \(\Delta RST\) as its reference; SAS is sufficient here since two sides and the included angle are known.
  4. Step 4: From vertex \(S\) (which will serve as \(Y\) in \(\Delta XYZ\)), draw a new ray \(YB\) at an acute angle to the line \(YT\). Mark 5 equal arcs along ray \(YB\) and label them \(B_1, B_2, B_3, B_4, B_5\). — Reason: We need 5 equal divisions because the denominator of the larger ratio-value is 5; this lets us locate points that divide the ray in the ratio \(3:2\) (to scale from \(ST\) up to \(YZ\)).
  5. Step 5: Join \(B_3\) to \(T\). Through \(B_5\), draw a line parallel to \(B_3T\). The point where this parallel line meets the extension of \(YT\) is the new vertex \(Z\). — Reason: By the Basic Proportionality Theorem, the parallel line divides the transversal in the ratio \(5:3\), scaling \(ST\) to \(YZ = 9.5\) cm correctly.
  6. Step 6: Similarly, from \(Y\), draw the ray at \(40^\circ\) and extend \(SR\) outward. Through \(B_5\), draw a line parallel to \(B_3R\) to locate vertex \(X\) on this ray such that \(XY = 7.5\) cm. Join \(X\) to \(Z\). — Reason: Applying the same proportional-division technique to the other side ensures \(XY\) is also scaled by the factor \(\dfrac{5}{3}\), giving the correct length of \(7.5\) cm.
  7. Step 7: Verify the construction: measure \(XY\) — it should equal \(7.5\) cm; measure \(YZ\) — it should equal \(9.5\) cm; check \(\angle XYZ = 40^\circ\). Also confirm \(\dfrac{RS}{XY} = \dfrac{4.5}{7.5} = \dfrac{3}{5}\). — Reason: Verification ensures that the constructed triangle truly satisfies the similarity condition and no measurement error occurred during drawing.

Final Answer

\(\Delta XYZ\) is the required triangle similar to \(\Delta RST\), with \(XY = 7.5\) cm, \(YZ = 9.5\) cm, and \(\angle XYZ = 40^\circ\), such that \(\dfrac{RS}{XY} = \dfrac{3}{5}\).

Common Mistake

One common mistake: Students sometimes use the ratio \(\dfrac{3}{5}\) directly to multiply (instead of its reciprocal \(\dfrac{5}{3}\)) when finding the sides of the larger triangle, which gives side lengths smaller than those of \(\Delta RST\) — the exact opposite of what is required.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \(RS = 4.5\) cm, \(ST = 5.7\) cm, \(\angle RST = 40^\circ\), scale factor \(= \dfrac{5}{3}\). Construct \(\Delta RST\) using SAS: draw \(ST = 5.7\) cm, mark \(\angle RST = 40^\circ\) at S, mark \(SR = 4.5\) cm, join R and T.
  2. Step 2: Scale factor \(= \dfrac{5}{3}\), so \(XY = \dfrac{5}{3} \times 4.5 = 7.5\) cm and \(YZ = \dfrac{5}{3} \times 5.7 = 9.5\) cm.
  3. Step 3: From S (renamed Y), draw ray at acute angle; mark 5 equal divisions, join 3rd point to T, draw parallel through 5th point to get Z on ST extended; similarly locate X on SR extended with \(XY = 7.5\) cm and \(\angle XYZ = 40^\circ\).

Answer: \(\Delta XYZ\) is the required triangle similar to \(\Delta RST\), with \(XY = 7.5\) cm, \(YZ = 9.5\) cm, and \(\angle XYZ = 40^\circ\), such that \(\dfrac{RS}{XY} = \dfrac{3}{5}\).

➕ More Examples

More Examples

Example 1

Question: \( \Delta ABC \sim \Delta PQR \). In \( \Delta ABC \), \( AB = 3.6 \) cm, \( \angle ABC = 50^\circ \), \( BC = 4.8 \) cm. Construct \( \Delta ABC \) and then construct \( \Delta PQR \) such that \( \dfrac{AB}{PQ} = \dfrac{2}{3} \).

Solution: We are given \( \Delta ABC \sim \Delta PQR \) with \( AB = 3.6 \) cm, \( \angle ABC = 50^\circ \), \( BC = 4.8 \) cm, and scale factor \( \dfrac{AB}{PQ} = \dfrac{2}{3} \). \nConstruction of \( \Delta ABC \): 1. Draw segment \( BC = 4.8 \) cm. 2. At point \( B \), construct an angle of \( 50^\circ \). 3. Mark point \( A \) on the ray from \( B \) such that \( AB = 3.6 \) cm. 4. Join \( A \) to \( C \). \( \Delta ABC \) is now constructed. \nFinding sides of \( \Delta PQR \): \nSince \( \dfrac{AB}{PQ} = \dfrac{2}{3} \), we have: \[ PQ = \frac{3}{2} \times AB = \frac{3}{2} \times 3.6 = 5.4 \text{ cm} \] \nSimilarly: \[ QR = \frac{3}{2} \times BC = \frac{3}{2} \times 4.8 = 7.2 \text{ cm} \] \nThe included angle \( \angle PQR = \angle ABC = 50^\circ \) (corresponding angles of similar triangles are equal). \nConstruction of \( \Delta PQR \): 1. Draw segment \( QR = 7.2 \) cm. 2. At point \( Q \), construct an angle of \( 50^\circ \). 3. Mark point \( P \) on the ray from \( Q \) such that \( PQ = 5.4 \) cm. 4. Join \( P \) to \( R \). \( \Delta PQR \) is now constructed. \nVerification: \( \dfrac{AB}{PQ} = \dfrac{3.6}{5.4} = \dfrac{2}{3} \) ✓ and \( \dfrac{BC}{QR} = \dfrac{4.8}{7.2} = \dfrac{2}{3} \) ✓

Answer: \( \Delta ABC \) with \( AB = 3.6 \) cm, \( \angle ABC = 50^\circ \), \( BC = 4.8 \) cm is constructed. \( \Delta PQR \) is constructed with \( PQ = 5.4 \) cm, \( \angle PQR = 50^\circ \), \( QR = 7.2 \) cm.

Example 2

Question: \( \Delta LMN \sim \Delta DEF \). In \( \Delta LMN \), \( LM = 6.0 \) cm, \( \angle LMN = 65^\circ \), \( MN = 5.0 \) cm. Construct \( \Delta LMN \) and then construct \( \Delta DEF \) such that \( \dfrac{LM}{DE} = \dfrac{4}{3} \).

Solution: We are given \( \Delta LMN \sim \Delta DEF \) with \( LM = 6.0 \) cm, \( \angle LMN = 65^\circ \), \( MN = 5.0 \) cm, and scale factor \( \dfrac{LM}{DE} = \dfrac{4}{3} \). \nConstruction of \( \Delta LMN \): 1. Draw segment \( MN = 5.0 \) cm. 2. At point \( M \), construct an angle of \( 65^\circ \). 3. Mark point \( L \) on the ray from \( M \) such that \( LM = 6.0 \) cm. 4. Join \( L \) to \( N \). \( \Delta LMN \) is now constructed. \nFinding sides of \( \Delta DEF \): \nSince \( \dfrac{LM}{DE} = \dfrac{4}{3} \), we have: \[ DE = \frac{3}{4} \times LM = \frac{3}{4} \times 6.0 = 4.5 \text{ cm} \] \nSimilarly: \[ EF = \frac{3}{4} \times MN = \frac{3}{4} \times 5.0 = 3.75 \text{ cm} \] \nThe included angle \( \angle DEF = \angle LMN = 65^\circ \) (corresponding angles of similar triangles are equal). \nConstruction of \( \Delta DEF \): 1. Draw segment \( EF = 3.75 \) cm. 2. At point \( E \), construct an angle of \( 65^\circ \). 3. Mark point \( D \) on the ray from \( E \) such that \( DE = 4.5 \) cm. 4. Join \( D \) to \( F \). \( \Delta DEF \) is now constructed. \nVerification: \( \dfrac{LM}{DE} = \dfrac{6.0}{4.5} = \dfrac{4}{3} \) ✓ and \( \dfrac{MN}{EF} = \dfrac{5.0}{3.75} = \dfrac{4}{3} \) ✓

Answer: \( \Delta LMN \) with \( LM = 6.0 \) cm, \( \angle LMN = 65^\circ \), \( MN = 5.0 \) cm is constructed. \( \Delta DEF \) is constructed with \( DE = 4.5 \) cm, \( \angle DEF = 65^\circ \), \( EF = 3.75 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: \( \Delta PQR \sim \Delta LMN \). In \( \Delta PQR \), \( PQ = 3.6 \) cm, \( \angle PQR = 55^\circ \), \( QR = 4.8 \) cm. Construct \( \Delta PQR \) and then construct \( \Delta LMN \) such that \( \dfrac{PQ}{LM} = \dfrac{3}{4} \).

Solution

  1. Step 1: Understand the given information: We are given \( \Delta PQR \) with \( PQ = 3.6 \) cm, \( \angle PQR = 55^\circ \), and \( QR = 4.8 \) cm. The ratio \( \dfrac{PQ}{LM} = \dfrac{3}{4} \) means \( \Delta LMN \) is larger than \( \Delta PQR \) by a scale factor of \( \dfrac{4}{3} \).
  2. Step 2: Construct \( \Delta PQR \): Draw segment \( QR = 4.8 \) cm. At point \( Q \), construct an angle of \( 55^\circ \). Along the ray making \( 55^\circ \) with \( QR \), mark point \( P \) such that \( PQ = 3.6 \) cm. Join \( P \) to \( R \). \( \Delta PQR \) is now constructed.
  3. Step 3: Find the sides of \( \Delta LMN \): Since \( \dfrac{PQ}{LM} = \dfrac{3}{4} \), the scale factor from \( \Delta PQR \) to \( \Delta LMN \) is \( \dfrac{4}{3} \). Calculate \( LM \): \[ LM = PQ \times \frac{4}{3} = 3.6 \times \frac{4}{3} = 4.8 \text{ cm} \] Calculate \( MN \): \[ MN = QR \times \frac{4}{3} = 4.8 \times \frac{4}{3} = 6.4 \text{ cm} \] The included angle remains: \( \angle LMN = \angle PQR = 55^\circ \).
  4. Step 4: Construct \( \Delta LMN \): Draw segment \( MN = 6.4 \) cm. At point \( M \), construct an angle of \( 55^\circ \). Along this ray, mark point \( L \) such that \( LM = 4.8 \) cm. Join \( L \) to \( N \). \( \Delta LMN \) is the required triangle similar to \( \Delta PQR \).
  5. Step 5: Verify the ratio: Check: \[ \frac{PQ}{LM} = \frac{3.6}{4.8} = \frac{3}{4} \] and \[ \frac{QR}{MN} = \frac{4.8}{6.4} = \frac{3}{4} \] Both ratios equal \( \dfrac{3}{4} \), confirming \( \Delta PQR \sim \Delta LMN \).

Answer: \( \Delta LMN \) is the required triangle similar to \( \Delta PQR \), with \( LM = 4.8 \) cm, \( MN = 6.4 \) cm, and \( \angle LMN = 55^\circ \), such that \( \dfrac{PQ}{LM} = \dfrac{3}{4} \).

Everything you get with Solver7

More questions in Geometric Contructions