SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q1

Construct a tangent to a circle with centre \(P\) and radius \(3.2\ cm\) at any point \(M\) on it.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a ball sitting on a flat table. The table only touches the ball at one tiny spot. That touching line is like a tangent. Now, a line from the centre of the ball to that spot stands perfectly upright to the table. So to draw a tangent, all you do is draw a circle, pick any point on it, draw a line from the centre to that point, and then draw another line crossing it at a perfect right angle. That crossing line is your tangent.

Answer: The line \( \ell \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle with centre \( P \) and radius \( 3.2 \text{ cm} \) at the point \( M \).

📖 Constructing a Tangent at a Point on a Circle

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property of a tangent is that it is always perpendicular to the radius drawn to the point of contact. So, if we are given a point \( M \) on a circle with centre \( P \), then the tangent at \( M \) is simply the line through \( M \) that is perpendicular to the radius \( PM \). This is why the construction reduces to drawing a perpendicular to \( PM \) at the point \( M \).

Formula Used

Tangent at point of contact \( \perp \) Radius through that point. That is, if \( \ell \) is the tangent at \( M \) on the circle with centre \( P \), then \( \ell \perp PM \).

Solution

  1. Step 1: Draw a circle with centre \( P \) and radius \( 3.2 \text{ cm} \). Open the compass to \( 3.2 \text{ cm} \), place its needle at point \( P \), and draw a complete circle.
  2. Step 2: Mark any point \( M \) on the circle. This point \( M \) will be the point of contact where the tangent touches the circle.
  3. Step 3: Join \( P \) and \( M \) using a ruler to draw the radius \( PM \). This radius has length \( 3.2 \text{ cm} \).
  4. Step 4: At the point \( M \), construct a line perpendicular to \( PM \). To do this, place the protractor at \( M \) so that its base line lies along \( PM \), and mark an angle of \( 90^\circ \). Alternatively, use the compass method: with \( M \) as centre, draw an arc cutting the line \( PM \) (extended if needed) at two points, then from these two points draw arcs of equal radius intersecting above \( M \). Join \( M \) with this intersection point.
  5. Step 5: Extend the perpendicular line on both sides of \( M \) and name it as line \( \ell \). This line \( \ell \) is the required tangent to the circle at point \( M \), because \( \ell \perp PM \) and it touches the circle only at \( M \).

Final Answer

The line \( \ell \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle with centre \( P \) and radius \( 3.2 \text{ cm} \) at the point \( M \).

Common Mistake

A very common mistake is to draw a line through \( M \) that only appears to touch the circle by eye, without actually constructing a perpendicular to the radius \( PM \). Since the tangent must be exactly perpendicular to \( PM \) at \( M \), skipping the \( 90^\circ \) construction gives an incorrect tangent.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Open your compass to exactly \( 3.2 \text{ cm} \) and place the needle firmly at a fixed point labelled \( P \). Draw a complete circle. — Reason: This creates the circle with centre \( P \) and radius \( 3.2 \text{ cm} \) on which the point of tangency will lie.
  2. Step 2: Choose and mark any point on the circumference of the circle; label it \( M \). — Reason: The point \( M \) is the point of contact where the tangent will touch the circle, so it must lie exactly on the circle.
  3. Step 3: Use a ruler to draw a straight line joining \( P \) to \( M \). This segment is the radius \( PM \) of length \( 3.2 \text{ cm} \). — Reason: We need the radius at the point of contact drawn explicitly, because the tangent must be perpendicular to this specific radius.
  4. Step 4: Place your protractor at the point \( M \) with its baseline aligned along \( PM \). Mark the point corresponding to \( 90^\circ \) on the protractor scale. — Reason: We are locating the direction that is exactly perpendicular to \( PM \) at \( M \), since the tangent must satisfy \( \ell \perp PM \).
  5. Step 5: Using the ruler, draw a straight line through \( M \) passing through the \( 90^\circ \) mark you just made. Extend this line on both sides of \( M \) and label it \( \ell \). — Reason: This produces the line through \( M \) that is perpendicular to the radius \( PM \), which by the tangent-radius property is precisely the tangent to the circle at \( M \).
  6. Step 6: Verify your construction by checking that the angle \( \angle PML = 90^\circ \) (where \( L \) is any point on \( \ell \) other than \( M \)) using the protractor, and confirm that \( \ell \) meets the circle only at \( M \). — Reason: A correctly drawn tangent touches the circle at exactly one point and is perpendicular to the radius there; verifying both conditions confirms the construction is accurate.

Final Answer

The line \( \ell \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle with centre \( P \) and radius \( 3.2 \text{ cm} \) at the point \( M \).

Common Mistake

One common mistake: students sometimes draw the perpendicular at the centre \( P \) instead of at the point of contact \( M \), which gives a line through \( P \) rather than a tangent at \( M \). Always construct the \( 90^\circ \) angle at \( M \), not at \( P \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( P \) and radius \( 3.2 \text{ cm} \). Mark a point \( M \) on the circle.
  2. Step 2: Join \( P \) to \( M \) to draw radius \( PM = 3.2 \text{ cm} \).
  3. Step 3: At \( M \), construct line \( \ell \) such that \( \angle PML = 90^\circ \), i.e., \( \ell \perp PM \).

Answer: The line \( \ell \) drawn through \( M \) perpendicular to the radius \( PM \) is the required tangent to the circle with centre \( P \) and radius \( 3.2 \text{ cm} \) at the point \( M \).

➕ More Examples

More Examples

Example 1

Question: Construct a tangent to a circle with centre O and radius 4.5 cm at any point A on it. Write the steps of construction.

Solution: Steps of Construction: \nStep 1: Draw a circle with centre O and radius 4.5 cm. That is, open the compass to a length of \( 4.5 \) cm and draw the circle. \nStep 2: Mark any point A on the circle. \nStep 3: Draw the radius OA and extend it slightly beyond A. \nStep 4: With A as centre, draw a small arc that cuts the line OA (and its extension) at two points, say X and Y. \nStep 5: With X and Y as centres and radius more than half of XY, draw arcs on either side of line OA. Let these arcs intersect at point B. \nStep 6: Join AB and extend on both sides. The line through A and B is the required tangent to the circle at point A. \nVerification: The angle OAB measures \( 90^\circ \), confirming that the constructed line is indeed a tangent, since the tangent at any point is perpendicular to the radius at that point.

Answer: A tangent is constructed at point A on the circle (centre O, radius 4.5 cm) by drawing the radius OA and then erecting a perpendicular to OA at A. The perpendicular line is the required tangent.

Example 2

Question: A circle has its centre at point Q and a radius of 3.8 cm. Point T lies on the circle. Construct the tangent to the circle at the point T and describe each step of your construction.

Solution: Steps of Construction: \nStep 1: Draw a circle with centre Q and radius \( 3.8 \) cm. \nStep 2: Mark any point T on the circumference of the circle. \nStep 3: Join QT. This is the radius to the point of tangency. \nStep 4: Extend the line QT beyond T to a point, say S, so that you have a straight line passing through Q and T. \nStep 5: With T as centre and a convenient radius, draw arcs on both sides of the line QT, cutting the line at two points, say C and D. \nStep 6: With C as centre and radius greater than \( \frac{1}{2} \) CD, draw an arc above the line. With D as centre and the same radius, draw another arc. Let these two arcs meet at point R. \nStep 7: Draw the line TR and extend it on both sides. Line TR is the required tangent to the circle at point T. \nVerification: Since TR is constructed perpendicular to the radius QT at the point T, and \( \angle QTR = 90^\circ \), the line TR is confirmed to be the tangent to the circle at T.

Answer: A tangent is constructed at point T on the circle (centre Q, radius 3.8 cm) by drawing radius QT and constructing the perpendicular to QT at T. The resulting perpendicular line TR is the required tangent.

🎯 Try a Similar Question

Try a Similar Question

Question: Construct a tangent to a circle with centre \( O \) and radius \( 4.5 \) cm at a point \( N \) on it. Write the steps of construction.

Solution

  1. Step 1: Draw the Circle: Draw a circle with centre \( O \) and radius \( 4.5 \) cm using a compass.
  2. Step 2: Mark the Point: Mark any point \( N \) on the circle. This is the point at which we will draw the tangent.
  3. Step 3: Draw the Radius: Join \( O \) and \( N \) to form the radius \( ON \).
  4. Step 4: Extend the Radius: Extend the line segment \( ON \) beyond \( N \) to a point, say \( N' \), so that \( N \) lies between \( O \) and \( N' \). This gives the full line through \( O \) and \( N \).
  5. Step 5: Draw the Perpendicular at N: With \( N \) as centre, draw arcs of equal radius on both sides of the line \( ON \) that cut the line at two points, say \( A \) and \( B \), such that \( NA = NB \). Now, with centres \( A \) and \( B \) and radius greater than \( AN \), draw two arcs that intersect at a point \( Q \). Join \( N \) and \( Q \). The line \( NQ \) is perpendicular to \( ON \) at \( N \).
  6. Step 6: Draw the Tangent Line: Extend \( NQ \) on both sides through \( N \) to obtain the tangent line \( t \). This line \( t \) passes through \( N \) and is perpendicular to the radius \( ON \).
  7. Step 7: Justification: By the theorem, the tangent to a circle at any point is perpendicular to the radius at that point. Since we constructed \( t \perp ON \) at \( N \), the line \( t \) is indeed the required tangent to the circle at \( N \).

Answer: The line \( t \) drawn through \( N \) perpendicular to the radius \( ON \) is the required tangent to the circle with centre \( O \) and radius \( 4.5 \) cm at the point \( N \).

Everything you get with Solver7

More questions in Geometric Contructions