SOLVER7 Study. Nothing Else.
Chapter 10 Examples Q3

Construct \(\Delta A'BC'\) similar to \(\Delta ABC\) such that \(AB:A'B=5:7\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you draw a small triangle on paper and want a bigger copy of it. Think of it like zooming in on a photo. The new triangle keeps the same shape but every side grows bigger. Here, the triangle grows by a special amount: for every 5 units the old triangle had, the new one gets 7 units. Vertex B stays in place, like a fixed pin. The other two corners simply slide farther away from B along the same directions. The new triangle looks exactly like the old one, just larger.

Answer: \(\Delta A'BC'\) is constructed with \(A\) lying on segment \(BA'\) and \(C\) lying on segment \(BC'\), such that \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\), so \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

📖 Construction of Similar Triangle (5:7 ratio)

Detailed Explanation

When we construct a triangle similar to a given triangle with a given scale factor, we use the Basic Proportionality Theorem (BPT). The scale factor tells us how the sides of the new triangle compare to the sides of the original triangle. Here the ratio is \(5:7\), which means the new triangle \(\Delta A'BC'\) is larger than \(\Delta ABC\) because \(7 > 5\). Each side of \(\Delta A'BC'\) will be \(\dfrac{7}{5}\) times the corresponding side of \(\Delta ABC\). Looking at the figure, vertex \(B\) is common, point \(A\) lies on \(BA'\), and point \(C\) lies on \(BC'\), so the enlargement is done from vertex \(B\). To achieve this, we divide a ray from \(B\) into 7 equal parts, use the 5th point to locate \(A\)-side reference, and use the 7th point to draw the enlarged triangle.

Formula Used

Scale factor \(=\dfrac{A'B}{AB}=\dfrac{7}{5}\), so \(A'B=\dfrac{7}{5}AB\) and \(BC'=\dfrac{7}{5}BC\).

Solution

  1. Step 1: Draw the given triangle ABC: First, construct any \(\Delta ABC\) with convenient measurements (for example \(BC = 6\) cm, \(AB = 5\) cm, \(AC = 4\) cm). This is our reference triangle.
  2. Step 2: Draw a ray making an acute angle at B: From vertex \(B\), draw a ray \(BX\) below the line \(BC\) (on the side opposite to vertex \(A\)), making an acute angle with \(BC\). This ray will be used to mark equal divisions.
  3. Step 3: Mark 7 equal points on the ray: Using a compass with a fixed small radius, mark 7 points \(B_1, B_2, B_3, B_4, B_5, B_6, B_7\) on the ray \(BX\) such that \(BB_1 = B_1B_2 = B_2B_3 = \ldots = B_6B_7\). We choose 7 because 7 is the larger number in the ratio \(5:7\).
  4. Step 4: Join the 5th point to C: Join \(B_5\) to \(C\). We use the 5th point because 5 is the smaller number in the ratio \(5:7\), and \(C\) is a vertex of the original triangle \(\Delta ABC\).
  5. Step 5: Draw parallel line through the 7th point: Through \(B_7\), draw a line parallel to \(B_5C\). Extend line \(BC\) if needed. Let this parallel line meet the extended line \(BC\) at point \(C'\). Now \(BC' = \dfrac{7}{5}BC\).
  6. Step 6: Draw parallel line through C' to locate A': Through \(C'\), draw a line parallel to \(CA\). Extend line \(BA\) if needed. Let this parallel line meet the extended line \(BA\) at point \(A'\).
  7. Step 7: The required triangle is formed: The triangle \(\Delta A'BC'\) so obtained is the required triangle similar to \(\Delta ABC\) with \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\).
  8. Step 8: Justification: Since \(B_7C' \parallel B_5C\), by BPT we have \(\dfrac{BC'}{BC} = \dfrac{BB_7}{BB_5} = \dfrac{7}{5}\). Also, since \(C'A' \parallel CA\), \(\Delta A'BC' \sim \Delta ABC\) by AA similarity, giving \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\).

Final Answer

\(\Delta A'BC'\) is constructed with \(A\) lying on segment \(BA'\) and \(C\) lying on segment \(BC'\), such that \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\), so \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

Common Mistake

A very common mistake is to mark only 5 points on the ray (thinking the 5 in the ratio matters) or to join \(B_7\) to \(C\) first and draw a parallel through \(B_5\). Always mark the larger number of divisions (here 7), and join the point corresponding to the denominator of the original triangle (here \(B_5\)) to \(C\), then draw the parallel through the 7th point to enlarge.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw triangle \(ABC\) with convenient side lengths, for example \(BC = 6\) cm, \(AB = 5\) cm, and \(AC = 4\) cm. — Reason: This gives us our reference (original) triangle from which the enlarged triangle will be constructed.
  2. Step 2: From vertex \(B\), draw a ray \(BX\) making an acute angle with side \(BC\), positioned on the side of \(BC\) away from vertex \(A\). — Reason: This ray will serve as a number line on which we can mark equal divisions; placing it away from \(A\) keeps the construction neat and unambiguous.
  3. Step 3: Using a compass set to a fixed small radius, mark 7 equal arcs along ray \(BX\), labelling the points \(B_1, B_2, B_3, B_4, B_5, B_6, B_7\) in order from \(B\). — Reason: Because the scale factor is \(\dfrac{7}{5}\), we need 7 equal divisions — the larger of the two numbers in the ratio determines the total number of parts.
  4. Step 4: Join \(B_5\) to \(A\) (i.e., draw the line segment \(B_5 A\)). Then, through \(B_7\), draw a line parallel to \(B_5 A\). Let this parallel line meet the extension of ray \(BA\) at the point \(A'\). — Reason: By BPT, the parallel line through \(B_7\) ensures that \(\dfrac{A'B}{AB} = \dfrac{BB_7}{BB_5} = \dfrac{7}{5}\), which is exactly the required scale factor for side \(AB\).
  5. Step 5: Join \(B_5\) to \(C\) (i.e., draw the line segment \(B_5 C\)). Then, through \(B_7\), draw a line parallel to \(B_5 C\). Let this parallel line meet the extension of ray \(BC\) at the point \(C'\). — Reason: The same BPT argument applies: the parallel through \(B_7\) guarantees \(\dfrac{BC'}{BC} = \dfrac{BB_7}{BB_5} = \dfrac{7}{5}\), scaling side \(BC\) by the correct factor.
  6. Step 6: Connect \(A'\) to \(C'\) to complete triangle \(A'BC'\). Verify that \(A\) lies on segment \(BA'\) and \(C\) lies on segment \(BC'\). — Reason: Since both \(A'\) and \(C'\) were located by the same proportionality ratio from \(B\), joining them closes the enlarged triangle, and the original points \(A\) and \(C\) naturally fall between \(B\) and the new vertices, confirming the enlargement is centred at \(B\).
  7. Step 7: Confirm similarity: check that \(\angle A'BC' = \angle ABC\) (the angle at \(B\) is shared) and that \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{A'C'}{AC} = \dfrac{7}{5}\). — Reason: Two triangles are similar (by SAS similarity) when an included angle is equal and the surrounding sides are in the same ratio; this confirms \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

Final Answer

\(\Delta A'BC'\) is constructed with \(A\) lying on segment \(BA'\) and \(C\) lying on segment \(BC'\), such that \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\), so \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

Common Mistake

One common mistake: students mark only 5 equal points on the ray instead of 7, forgetting that the total divisions must equal the larger number in the ratio (7), not the smaller one (5) — this gives an incorrect scale factor.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw \(\Delta ABC\) (e.g., \(BC = 6\) cm, \(AB = 5\) cm, \(AC = 4\) cm). From \(B\), draw ray \(BX\) at an acute angle to \(BC\).
  2. Step 2: Mark 7 equal arcs on \(BX\) giving points \(B_1, B_2, \ldots, B_7\). Join \(B_5\) to \(A\); draw a line through \(B_7\) parallel to \(B_5A\) to meet \(BA\) extended at \(A'\).
  3. Step 3: Through \(B_7\), draw a line parallel to \(B_5C\) to meet \(BC\) extended at \(C'\). Join \(A'C'\) to complete \(\Delta A'BC'\).
  4. Step 4: By BPT: \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\), confirming \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

Answer: \(\Delta A'BC'\) is constructed with \(A\) lying on segment \(BA'\) and \(C\) lying on segment \(BC'\), such that \(\dfrac{A'B}{AB} = \dfrac{BC'}{BC} = \dfrac{7}{5}\), so \(\Delta A'BC' \sim \Delta ABC\) with scale factor \(\dfrac{7}{5}\).

➕ More Examples

More Examples

Example 1

Question: Construct triangle \( \triangle A'BC' \) similar to \( \triangle ABC \) such that \( AB : A'B = 3 : 4 \). Describe the steps of construction.

Solution: We need to construct \( \triangle A'BC' \) similar to \( \triangle ABC \) with scale factor \( \dfrac{A'B}{AB} = \dfrac{3}{4} \). Since \( A'B < AB \), the new triangle is smaller than the original. \nStep 1: Draw \( \triangle ABC \) with the given measurements. \nStep 2: Draw a ray \( BX \) making an acute angle with \( BC \) on the side opposite to \( A \). \nStep 3: Mark 4 equal points \( B_1, B_2, B_3, B_4 \) on ray \( BX \) such that \( BB_1 = B_1B_2 = B_2B_3 = B_3B_4 \). \nStep 4: Join \( B_4 \) to \( A \). Draw a line through \( B_3 \) parallel to \( B_4A \), meeting \( BA \) (extended if necessary) at \( A' \). \nStep 5: Draw a line through \( A' \) parallel to \( AC \), meeting \( BC \) at \( C' \). \nStep 6: \( \triangle A'BC' \) is the required triangle similar to \( \triangle ABC \). \nVerification: By construction, \( \dfrac{A'B}{AB} = \dfrac{BB_3}{BB_4} = \dfrac{3}{4} \), confirming the ratio \( AB : A'B = 4 : 3 \), which is equivalent to \( AB : A'B = 4 : 3 \) so \( A'B : AB = 3 : 4 \). All corresponding sides satisfy \[ \frac{A'B}{AB} = \frac{BC'}{BC} = \frac{A'C'}{AC} = \frac{3}{4} \]

Answer: \( \triangle A'BC' \) is constructed with each side equal to \( \dfrac{3}{4} \) of the corresponding side of \( \triangle ABC \), i.e., scale factor \( = \dfrac{3}{4} \).

Example 2

Question: Construct triangle \( \triangle PQ'R' \) similar to \( \triangle PQR \) such that \( PQ' : PQ = 5 : 3 \). Describe the steps of construction.

Solution: We need to construct \( \triangle PQ'R' \) similar to \( \triangle PQR \) with scale factor \( \dfrac{PQ'}{PQ} = \dfrac{5}{3} \). Since \( PQ' > PQ \), the new triangle is larger than the original. \nStep 1: Draw \( \triangle PQR \) with the given measurements. \nStep 2: Draw a ray \( PX \) making an acute angle with \( PQ \). \nStep 3: Mark 5 equal points \( P_1, P_2, P_3, P_4, P_5 \) on ray \( PX \) such that \( PP_1 = P_1P_2 = P_2P_3 = P_3P_4 = P_4P_5 \). \nStep 4: Join \( P_3 \) to \( Q \). Draw a line through \( P_5 \) parallel to \( P_3Q \), meeting the line \( PQ \) extended at \( Q' \). \nStep 5: Draw a line through \( Q' \) parallel to \( QR \), meeting the line \( PR \) extended at \( R' \). \nStep 6: \( \triangle PQ'R' \) is the required triangle similar to \( \triangle PQR \). \nVerification: By construction, \( \dfrac{PQ'}{PQ} = \dfrac{PP_5}{PP_3} = \dfrac{5}{3} \). All corresponding sides satisfy \[ \frac{PQ'}{PQ} = \frac{PQ'}{PQ} = \frac{Q'R'}{QR} = \frac{PR'}{PR} = \frac{5}{3} \]

Answer: \( \triangle PQ'R' \) is constructed with each side equal to \( \dfrac{5}{3} \) of the corresponding side of \( \triangle PQR \), i.e., scale factor \( = \dfrac{5}{3} \).

🎯 Try a Similar Question

Try a Similar Question

Question: Construct \( \Delta P'QR' \) similar to \( \Delta PQR \) such that \( PQ : P'Q = 3 : 8 \). Write down the scale factor and describe how \( P \) and \( R \) relate to the sides \( QP' \) and \( QR' \) respectively.

Solution

  1. Step 1: Interpret the given ratio: We are given \( PQ : P'Q = 3 : 8 \), which means \( \dfrac{P'Q}{PQ} = \dfrac{8}{3} \). Since the ratio is greater than 1, \( \Delta P'QR' \) is larger than \( \Delta PQR \).
  2. Step 2: Draw a ray from Q: Draw \( \Delta PQR \) with the given measurements. From vertex \( Q \), draw a ray \( QX \) making an acute angle with \( QP \). Mark 8 equal points \( Q_1, Q_2, \ldots, Q_8 \) on ray \( QX \) such that \( QQ_1 = Q_1Q_2 = \cdots = Q_7Q_8 \).
  3. Step 3: Locate P' on the ray: Join \( Q_3 \) to \( P \). Through \( Q_8 \), draw a line parallel to \( Q_3P \). This parallel line meets the line \( QP \) extended at \( P' \). Now \( QP' = \dfrac{8}{3} \times QP \), so \( P \) lies on segment \( QP' \).
  4. Step 4: Locate R': Similarly, from \( Q \), draw a ray \( QY \) along \( QR \) extended. Through \( Q_8 \), draw a line parallel to \( Q_3R \) to meet the line \( QR \) extended at \( R' \). Now \( QR' = \dfrac{8}{3} \times QR \), so \( R \) lies on segment \( QR' \).
  5. Step 5: Complete the construction: Join \( P'R' \). The triangle \( \Delta P'QR' \) is the required triangle similar to \( \Delta PQR \) with scale factor \( \dfrac{8}{3} \). We can verify: \[ \dfrac{QP'}{QP} = \dfrac{QR'}{QR} = \dfrac{8}{3} \] and \( P'R' \parallel PR \), confirming similarity by the SAS similarity criterion.

Answer: \( \Delta P'QR' \) is constructed with \( P \) lying on segment \( QP' \) and \( R \) lying on segment \( QR' \), such that \( \dfrac{P'Q}{PQ} = \dfrac{QR'}{QR} = \dfrac{8}{3} \). Therefore \( \Delta P'QR' \sim \Delta PQR \) with scale factor \( \dfrac{8}{3} \).

Everything you get with Solver7

More questions in Geometric Contructions