SOLVER7 Study. Nothing Else.
Problem Set 10 Q3

Draw any circle. Take any point \(A\) on it and construct tangent at A without using the centre of the circle.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle like a round cookie. A tangent is a straight line that just barely touches the cookie at one spot without going inside. Normally you need to find the centre to draw this line. But there is a cool shortcut using a chord, which is like a stick laid across the cookie. A special angle made by that stick on the far side of the cookie matches the angle the tangent makes at the touching point. Copy that angle at the touching point, and you get your tangent line, no centre needed.

Answer: The line \( AT \) drawn through \( A \) such that \(\angle TAB = \angle APB\) is the required tangent to the circle at the point \( A \), constructed without using the centre.

📖 Constructing a Tangent at a Point on a Circle Without Using its Centre

Detailed Explanation

A tangent to a circle is a line that touches the circle at exactly one point. Normally, we draw a tangent by joining the centre to the point of contact and drawing a perpendicular there. But if the centre is not known, we use the Tangent–Chord Angle Theorem (Alternate Segment Theorem): the angle between a tangent to a circle and a chord drawn from the point of contact is equal to the angle subtended by that chord in the alternate segment of the circle. So, if we can reproduce this inscribed angle at point A on the other side of the chord, the resulting line will be the required tangent.

Formula Used

Alternate Segment Theorem: If \( AB \) is a chord of a circle and \( AT \) is the tangent at \( A \), then \(\angle TAB = \angle APB\), where \( P \) is any point on the major arc (the alternate segment).

Solution

  1. Step 1: Draw a circle of any convenient radius using a compass. Mark any point \( A \) on the circle. This is the point at which the tangent has to be constructed.
  2. Step 2: From point \( A \), draw any chord \( AB \) by choosing another point \( B \) on the circle and joining \( A \) to \( B \) with a ruler. The chord \( AB \) divides the circle into two arcs (segments).
  3. Step 3: Take any point \( P \) on the major arc (the arc lying on the opposite side of chord \( AB \) from the side on which we want the tangent). Join \( PA \) and \( PB \) using a ruler to form the inscribed angle \(\angle APB\) in the alternate segment.
  4. Step 4: Now we need to construct an angle equal to \(\angle APB\) at the point \( A \), on the opposite side of chord \( AB \) from \( P \). To do this, use the standard 'copy-an-angle' construction: with \( P \) as centre and any convenient radius, draw an arc cutting \( PA \) and \( PB \). With the same radius and centre \( A \), draw a similar arc on the opposite side of \( AB \), cutting \( AB \) at some point \( X \).
  5. Step 5: Measure the chord of the arc drawn in Step 4 at \( P \) (i.e., the distance between the two points where the arc cuts \( PA \) and \( PB \)) with the compass. With this distance as radius and \( X \) as centre, draw an arc that cuts the arc drawn at \( A \) at a point \( T \).
  6. Step 6: Join \( A \) and \( T \) and extend the line on both sides. By construction, \(\angle TAB = \angle APB\). By the Alternate Segment Theorem, since the angle between line \( AT \) and chord \( AB \) equals the inscribed angle in the alternate segment, the line \( AT \) must be the tangent to the circle at \( A \).

Final Answer

The line \( AT \) drawn through \( A \) such that \(\angle TAB = \angle APB\) is the required tangent to the circle at the point \( A \), constructed without using the centre.

Common Mistake

A very common mistake is to construct the copied angle on the same side of the chord \( AB \) as the point \( P \). The Alternate Segment Theorem requires the tangent–chord angle to be equal to the inscribed angle in the alternate (opposite) segment, so the copied angle must lie on the opposite side of \( AB \) from \( P \); otherwise the line drawn will not be a tangent.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle of convenient radius with a compass and mark a point \( A \) anywhere on the circle. — Reason: Point \( A \) is the specific location on the circle where we want to construct the tangent.
  2. Step 2: Pick any other point \( B \) on the circle and draw chord \( AB \) with a ruler. This chord splits the circle into two segments (arcs). — Reason: The chord \( AB \) is needed as a reference line, because the Alternate Segment Theorem links the tangent direction to the angle this chord makes inside the circle.
  3. Step 3: Mark any point \( P \) on the major arc (the larger arc, on the opposite side of \( AB \) from where the tangent will be drawn). Join \( P \) to both \( A \) and \( B \) to form the inscribed angle \( \angle APB \). — Reason: This inscribed angle \( \angle APB \) lies in the alternate segment and, by the theorem, must equal the angle the tangent makes with chord \( AB \).
  4. Step 4: At point \( A \), on the opposite side of chord \( AB \) from point \( P \), construct an angle equal to \( \angle APB \) using a protractor or compass construction. Label the ray drawn at this angle as \( AT \). — Reason: We are physically recreating the angle \( \angle APB \) at point \( A \) so that \( \angle TAB = \angle APB \), which is exactly the condition the Alternate Segment Theorem requires for \( AT \) to be a tangent.
  5. Step 5: Extend ray \( AT \) on both sides of \( A \) to form a complete straight line. — Reason: A tangent is a full straight line, not just a ray, so extending it gives the complete tangent line at \( A \).
  6. Step 6: Verify that \( \angle TAB = \angle APB \) by measuring both angles. If they match, the construction is correct. — Reason: This check confirms that the Alternate Segment Theorem condition is satisfied, guaranteeing that line \( AT \) touches the circle only at \( A \) and is therefore a true tangent.

Final Answer

The line \( AT \) drawn through \( A \) such that \(\angle TAB = \angle APB\) is the required tangent to the circle at the point \( A \), constructed without using the centre.

Common Mistake

One common mistake: Students sometimes mark point \( P \) on the minor arc instead of the major arc (alternate segment), which gives the wrong reference angle and produces an incorrect tangent direction.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle, mark point \( A \) on it, and draw chord \( AB \) to any point \( B \) on the circle.
  2. Step 2: Mark point \( P \) on the major arc; join \( PA \) and \( PB \) to obtain inscribed angle \( \angle APB \) in the alternate segment.
  3. Step 3: At point \( A \), construct \( \angle TAB = \angle APB \) on the opposite side of chord \( AB \) from \( P \); the ray \( AT \) is the required tangent.

Answer: The line \( AT \) drawn through \( A \) such that \(\angle TAB = \angle APB\) is the required tangent to the circle at the point \( A \), constructed without using the centre.

➕ More Examples

More Examples

Example 1

Question: Draw any circle. Mark a point P on it. Without using the centre of the circle, construct the tangent to the circle at point P. Write the steps of construction.

Solution: Step 1: Draw a circle of any convenient radius (say 4 cm) using a compass. Do NOT mark the centre. \nStep 2: Mark a point P anywhere on the circle. \nStep 3: Draw a chord PQ through P by marking another point Q on the circle and joining P to Q with a straight line. \nStep 4: Now construct a perpendicular to the chord PQ at the point P using the following compass method: (a) With P as centre and a suitable radius, draw arcs on both sides of P along the line PQ, cutting PQ at points M and N. (b) With M as centre and radius greater than half of MN, draw an arc on one side of PQ. (c) With the same radius and N as centre, draw another arc intersecting the previous arc at point R. (d) Join P to R and extend it on both sides. The line PR is perpendicular to PQ at P. \nStep 5: The line through P perpendicular to chord PQ is the required tangent to the circle at point P. \nJustification: Since PQ is a chord of the circle passing through P, the tangent at P must be perpendicular to the radius OP. By construction the line PR is perpendicular to PQ at P, which replicates the perpendicularity condition without needing the centre. Hence PR is the tangent at P.

Answer: The line constructed perpendicular to chord PQ at point P is the tangent to the circle at P.

Example 2

Question: A circle is drawn and a point B is marked on it. Without finding the centre of the circle, construct a tangent at B. Also justify why the constructed line is indeed a tangent.

Solution: Step 1: Draw a circle (any radius). Mark a point B on the circle. The centre is NOT to be used. \nStep 2: Draw a chord BC by choosing another point C on the circle and joining B to C. \nStep 3: We now apply the fact that the tangent at any point is perpendicular to the chord at that point (equivalently perpendicular to the radius, which passes through that chord only if it is a diameter; but the perpendicular construction at B gives the tangent regardless). \nStep 4: Construct the perpendicular to BC at B: (a) Place the compass at B with any radius r and mark two points X and Y on line BC such that BX = BY = r. (b) Increase the compass radius. With X as centre draw an arc above (or below) line BC. (c) With the same radius and Y as centre draw another arc intersecting the first at point T. (d) Draw the line BT. Line BT is perpendicular to BC at B. \nStep 5: The line BT is the required tangent to the circle at B. \nJustification: By construction, angle TBC = \( 90^\circ \). The tangent to a circle at a point is the unique line through that point that is perpendicular to the radius at that point. Since the radius at B lies along BO (towards the centre), and any chord through B (such as BC) lies in the plane of the circle, the line perpendicular to the chord BC at B is also perpendicular to BO. Therefore BT is perpendicular to the radius at B, making it the tangent at B. Hence the construction is valid.

Answer: Line BT, constructed perpendicular to chord BC at point B, is the tangent to the circle at B.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw any circle and mark three points P, Q, and R on it. Without using the centre of the circle, construct a tangent to the circle at point P. Justify your construction using the Alternate Segment Theorem.

Solution

  1. Step 1: Draw the circle and mark points: Draw a circle of any convenient radius. Mark three distinct points P, Q, and R on the circumference of the circle.
  2. Step 2: Draw the chord PQ: Join P and Q to form chord PQ. This chord will be used as the reference chord for applying the Alternate Segment Theorem.
  3. Step 3: Mark the inscribed angle: Join R to P and R to Q. The angle \( \angle PRQ \) is the inscribed angle subtending arc PQ (the arc that does NOT contain R), and it lies in the alternate segment with respect to the chord PQ.
  4. Step 4: Construct the tangent line: At point P, draw a line \( TT' \) such that the angle between this line and the chord PQ on the side of the arc not containing R equals \( \angle PRQ \). That is, construct \( \angle TPQ = \angle PRQ \), where T is on the side of PQ opposite to R.
  5. Step 5: Verify using Alternate Segment Theorem: By the converse of the Alternate Segment Theorem, if a line through P makes an angle with chord PQ equal to the inscribed angle \( \angle PRQ \) in the alternate segment, then that line is the tangent to the circle at P. Since we constructed \( \angle TPQ = \angle PRQ \), the line \( TT' \) is indeed tangent to the circle at P.

Answer: The line \( TT' \) drawn through P such that \( \angle TPQ = \angle PRQ \) (the inscribed angle in the alternate segment) is the required tangent to the circle at point P, constructed without using the centre.

Everything you get with Solver7

More questions in Geometric Contructions