\(\Delta LMN\sim \Delta LQP.\) In \(\Delta LMN,\ LM=3.6\ cm,\) \(\angle L=50^\circ,\ LN=4.2\ cm\) and \(\dfrac{LM}{LQ}=\dfrac{4}{7}.\) Construct \(\Delta LQP.\)
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
Imagine you have a small drawing of a triangle and you want to make a bigger copy of it. The bigger copy has the same shape and same angles, just stretched out. Here, the small triangle has two sides of length \( 3.6 \) cm and \( 4.2 \) cm. We want a bigger triangle that is \( \dfrac{7}{4} \) times larger. So the new sides become \( 6.3 \) cm and \( 7.35 \) cm. The corner angle stays the same at \( 50^\circ \) because stretching a shape never changes its angles.
Answer: \( \Delta LQP \) is constructed with \( LQ = 6.3 \) cm, \( LP = 7.35 \) cm and \( \angle L = 50^\circ \), such that \( \Delta LMN \sim \Delta LQP \) with \( \dfrac{LM}{LQ} = \dfrac{4}{7} \).
When two triangles are similar, their corresponding angles are equal and their corresponding sides are in the same ratio. Here \( \Delta LMN \sim \Delta LQP \), so \( \angle L \) is common, \( \angle M = \angle Q \), and \( \angle N = \angle P \). The sides satisfy \[ \dfrac{LM}{LQ} = \dfrac{LN}{LP} = \dfrac{MN}{QP} \] Given \( \dfrac{LM}{LQ} = \dfrac{4}{7} \), the new triangle \( \Delta LQP \) is a scaled (enlarged) version of \( \Delta LMN \) with scale factor \( \dfrac{7}{4} \). To construct \( \Delta LQP \), we first draw \( \Delta LMN \), then use the basic proportionality idea: draw a ray from \( L \), mark 7 equal parts on it, join the 4th point to \( M \), and through the 7th point draw a line parallel to it to locate \( Q \) on ray \( LM \) extended. Similarly locate \( P \) on ray \( LN \) extended.
\[ \dfrac{LM}{LQ} = \dfrac{LN}{LP} = \dfrac{4}{7} \] So \( LQ = \dfrac{7}{4} \times LM \) and \( LP = \dfrac{7}{4} \times LN \).
\( \Delta LQP \) is constructed with \( LQ = 6.3 \) cm, \( LP = 7.35 \) cm and \( \angle L = 50^\circ \), such that \( \Delta LMN \sim \Delta LQP \) with \( \dfrac{LM}{LQ} = \dfrac{4}{7} \).
A common mistake is to shrink the triangle instead of enlarging it. Since \( \dfrac{LM}{LQ} = \dfrac{4}{7} \) with \( 4 < 7 \), the new triangle \( \Delta LQP \) is larger than \( \Delta LMN \), so \( Q \) must lie on the extension of \( LM \) beyond \( M \), not between \( L \) and \( M \). Also, students often join the wrong division point — always join the point corresponding to the smaller number in the ratio to \( M \), and draw the parallel through the point of the larger number.
\( \Delta LQP \) is constructed with \( LQ = 6.3 \) cm, \( LP = 7.35 \) cm and \( \angle L = 50^\circ \), such that \( \Delta LMN \sim \Delta LQP \) with \( \dfrac{LM}{LQ} = \dfrac{4}{7} \).
One common mistake: students sometimes apply the scale factor \( \dfrac{4}{7} \) instead of \( \dfrac{7}{4} \) when enlarging, which gives a smaller triangle instead of the required larger one — always check whether the new triangle is bigger or smaller before deciding which ratio to use.
Answer: \( \Delta LQP \) is constructed with \( LQ = 6.3 \) cm, \( LP = 7.35 \) cm and \( \angle L = 50^\circ \), such that \( \Delta LMN \sim \Delta LQP \) with \( \dfrac{LM}{LQ} = \dfrac{4}{7} \).
Question: \( \Delta ABC \sim \Delta ADE \). In \( \Delta ABC \), \( AB = 4.5 \) cm, \( \angle A = 60^\circ \), \( AC = 5.4 \) cm and \( \dfrac{AB}{AD} = \dfrac{3}{5} \). Construct \( \Delta ADE \).
Solution: Since \( \Delta ABC \sim \Delta ADE \), the correspondence is \( A \leftrightarrow A \), \( B \leftrightarrow D \), \( C \leftrightarrow E \). The angle at \( A \) is common to both triangles, so \( \angle DAE = \angle BAC = 60^\circ \). Given \( \dfrac{AB}{AD} = \dfrac{3}{5} \), we find \( AD \): \[ \frac{4.5}{AD} = \frac{3}{5} \] So \[ AD = \frac{4.5 \times 5}{3} = 7.5 \text{ cm} \] Similarly, since \( \dfrac{AC}{AE} = \dfrac{3}{5} \): \[ \frac{5.4}{AE} = \frac{3}{5} \] So \[ AE = \frac{5.4 \times 5}{3} = 9 \text{ cm} \] Construction steps: (1) Draw segment \( AD = 7.5 \) cm. (2) At point \( A \), construct an angle of \( 60^\circ \). (3) Mark point \( E \) on the ray such that \( AE = 9 \) cm. (4) Join \( D \) and \( E \) to complete \( \Delta ADE \).
Answer: \( AD = 7.5 \) cm, \( AE = 9 \) cm, \( \angle DAE = 60^\circ \). Construct \( \Delta ADE \) with these measurements.
Question: \( \Delta PQR \sim \Delta PST \). In \( \Delta PQR \), \( PQ = 5.6 \) cm, \( \angle P = 45^\circ \), \( PR = 6.3 \) cm and \( \dfrac{PQ}{PS} = \dfrac{4}{6} \). Construct \( \Delta PST \).
Solution: Since \( \Delta PQR \sim \Delta PST \), the correspondence is \( P \leftrightarrow P \), \( Q \leftrightarrow S \), \( R \leftrightarrow T \). The angle at \( P \) is common, so \( \angle SPT = \angle QPR = 45^\circ \). Given \( \dfrac{PQ}{PS} = \dfrac{4}{6} \), we find \( PS \): \[ \frac{5.6}{PS} = \frac{4}{6} \] So \[ PS = \frac{5.6 \times 6}{4} = 8.4 \text{ cm} \] Since \( \dfrac{PR}{PT} = \dfrac{4}{6} \): \[ \frac{6.3}{PT} = \frac{4}{6} \] So \[ PT = \frac{6.3 \times 6}{4} = 9.45 \text{ cm} \] Construction steps: (1) Draw segment \( PS = 8.4 \) cm. (2) At point \( P \), construct an angle of \( 45^\circ \). (3) Mark point \( T \) on the ray such that \( PT = 9.45 \) cm. (4) Join \( S \) and \( T \) to complete \( \Delta PST \).
Answer: \( PS = 8.4 \) cm, \( PT = 9.45 \) cm, \( \angle SPT = 45^\circ \). Construct \( \Delta PST \) with these measurements.
Question: \( \Delta PQR \sim \Delta PST \). In \( \Delta PQR \), \( PQ = 4.5 \) cm, \( \angle P = 60^{\circ} \), \( PR = 5.4 \) cm and \( \dfrac{PQ}{PS} = \dfrac{3}{5} \). Construct \( \Delta PST \).
Answer: \( \Delta PST \) is constructed with \( PS = 7.5 \) cm, \( PT = 9 \) cm and \( \angle P = 60^{\circ} \), such that \( \Delta PQR \sim \Delta PST \) with \( \dfrac{PQ}{PS} = \dfrac{3}{5} \).