SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q7

Draw a circle with radius \(4.1\ cm.\) Construct tangents to the circle from a point at a distance \(7.3\ cm\) from the centre.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle like a round pond and a point outside it like you standing on land. You want to throw two ropes so each rope just barely touches the edge of the pond without crossing it. Those two ropes are called tangents. A clever trick lets us find exactly where they touch: we draw a helper circle using the midpoint between you and the pond's centre. The ropes end up being about 6.04 cm long each. Both ropes are always the same length, which is a neat fact about circles.

Answer: Two tangents \(PA\) and \(PB\) are constructed from the external point \(P\) to the circle of radius \(4.1\ cm\), each of length approximately \(6.04\ cm\).

📖 Construction of Tangents to a Circle from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A key property of tangents is that the tangent is always perpendicular to the radius drawn at the point of contact. When a point lies outside a circle, exactly two tangents can be drawn from that point to the circle, and their lengths are equal. To construct these tangents geometrically, we use the fact that the angle in a semicircle is a right angle. So, if we draw a circle whose diameter is the segment joining the centre \(O\) and the external point \(P\), it will cut the given circle at two points. The lines from \(P\) through these points will be perpendicular to the radii at those points, and hence they are the required tangents.

Formula Used

Length of tangent from external point: \( \ell = \sqrt{d^2 - r^2} \), where \(d\) is the distance from the centre to the external point and \(r\) is the radius.

Solution

  1. Step 1: Draw a circle with centre \(O\) and radius \(4.1\ cm\) using a compass. Mark the centre clearly.
  2. Step 2: Mark a point \(P\) outside the circle such that \(OP = 7.3\ cm\). Join \(O\) and \(P\) with a straight line segment.
  3. Step 3: Find the midpoint \(M\) of segment \(OP\). To do this, draw arcs of radius greater than half of \(OP\) from both \(O\) and \(P\) on either side of \(OP\). Join the two intersection points; this line cuts \(OP\) at its midpoint \(M\).
  4. Step 4: With \(M\) as centre and radius \(MO = MP = 3.65\ cm\), draw a circle. This new circle will intersect the original circle at two points; call them \(A\) and \(B\).
  5. Step 5: Join \(PA\) and \(PB\). These two line segments are the required tangents from the external point \(P\) to the original circle. This works because \(\angle OAP\) and \(\angle OBP\) are angles in a semicircle of the second circle, so each equals \(90^\circ\), making \(PA \perp OA\) and \(PB \perp OB\).
  6. Step 6: Verify the length of the tangents using the Pythagoras theorem in right triangle \(OAP\): \[ PA = \sqrt{OP^2 - OA^2} = \sqrt{(7.3)^2 - (4.1)^2} \] \[ PA = \sqrt{53.29 - 16.81} = \sqrt{36.48} \approx 6.04\ cm \] Measuring \(PA\) and \(PB\) with a ruler should give approximately \(6.04\ cm\).

Final Answer

Two tangents \(PA\) and \(PB\) are constructed from the external point \(P\) to the circle of radius \(4.1\ cm\), each of length approximately \(6.04\ cm\).

Common Mistake

A very common mistake is to try drawing tangents by eye — simply drawing lines from \(P\) that appear to touch the circle. This never gives accurate tangents. The correct method is to use the midpoint of \(OP\) as the centre of an auxiliary circle passing through \(O\) and \(P\); its intersection points with the given circle guarantee perpendicularity between the radius and the tangent.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \(O\) and radius \(4.1\ cm\) using a compass, and mark the centre \(O\) clearly. — Reason: This is the given circle to which we need to construct the tangents.
  2. Step 2: Mark an external point \(P\) such that the distance \(OP = 7.3\ cm\), and join \(O\) and \(P\) with a straight line segment. — Reason: The problem requires the tangents to originate from a point that lies outside the circle at the specified distance.
  3. Step 3: Locate the midpoint \(M\) of segment \(OP\) by drawing arcs of radius greater than half of \(OP\) from both \(O\) and \(P\) on either side of \(OP\), then joining the two arc-intersection points to bisect \(OP\). The point where this bisector crosses \(OP\) is \(M\), so \(OM = MP = 3.65\ cm\). — Reason: We need \(M\) to serve as the centre of a new auxiliary circle whose diameter is \(OP\).
  4. Step 4: With \(M\) as centre and radius \(MO = MP = 3.65\ cm\), draw an auxiliary circle. Let this circle intersect the original circle at points \(A\) and \(B\). — Reason: Any point on a circle with diameter \(OP\) subtends a right angle at \(OP\), so \(\angle OAP = \angle OBP = 90^\circ\). This guarantees that \(PA\) and \(PB\) will be perpendicular to the radii \(OA\) and \(OB\), making them tangents.
  5. Step 5: Join \(P\) to \(A\) and \(P\) to \(B\) with straight lines. These two lines are the required tangents \(PA\) and \(PB\) to the circle. — Reason: Since \(\angle OAP = 90^\circ\) and \(\angle OBP = 90^\circ\), each line from \(P\) meets the circle at exactly one point and is perpendicular to the radius there, satisfying the definition of a tangent.
  6. Step 6: Verify the length of each tangent using the formula. Substituting \(d = 7.3\ cm\) and \(r = 4.1\ cm\): \[ \ell = \sqrt{(7.3)^2 - (4.1)^2} \] \[ \ell = \sqrt{53.29 - 16.81} \] \[ \ell = \sqrt{36.48} \approx 6.04\ cm \] — Reason: This numerical check confirms that the measured lengths of \(PA\) and \(PB\) on the diagram should each be approximately \(6.04\ cm\), validating the construction.

Final Answer

Two tangents \(PA\) and \(PB\) are constructed from the external point \(P\) to the circle of radius \(4.1\ cm\), each of length approximately \(6.04\ cm\).

Common Mistake

One common mistake: Students often set the radius of the auxiliary circle to the full length \(OP\) instead of half of it, i.e., they use \(OP\) instead of \(MP = OP/2\) as the radius, which means the auxiliary circle does not have \(OP\) as its diameter and the right-angle property is lost.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: radius \( r = 4.1 \) cm, distance \( OP = d = 7.3 \) cm. Draw circle with centre \( O \), radius \( 4.1 \) cm; mark external point \( P \) with \( OP = 7.3 \) cm.
  2. Step 2: Bisect \( OP \) to get midpoint \( M \); \( OM = MP = 3.65 \) cm. Draw a circle with centre \( M \) and radius \( 3.65 \) cm; let it intersect the original circle at points \( A \) and \( B \).
  3. Step 3: Join \( PA \) and \( PB \); these are the required tangents. Verification: \( \ell = \sqrt{(7.3)^2 - (4.1)^2} = \sqrt{53.29 - 16.81} = \sqrt{36.48} \approx 6.04 \) cm.

Answer: Two tangents \(PA\) and \(PB\) are constructed from the external point \(P\) to the circle of radius \(4.1\ cm\), each of length approximately \(6.04\ cm\).

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 3.5 \) cm. Construct tangents to the circle from an external point that is \( 6.5 \) cm away from the centre. Also find the length of each tangent.

Solution: Step 1: Draw a circle with centre O and radius \( r = 3.5 \) cm. \nStep 2: Mark an external point P such that \( OP = 6.5 \) cm. \nStep 3: Find the midpoint M of OP. So \( OM = \dfrac{6.5}{2} = 3.25 \) cm. \nStep 4: Draw a circle with centre M and radius \( 3.25 \) cm. It intersects the original circle at points T1 and T2. \nStep 5: Join P to T1 and P to T2. These are the required tangents, since the angle in a semicircle is \( 90^\circ \), so \( \angle OT_1P = 90^\circ \). \nStep 6: Calculate the tangent length using the Pythagorean theorem. \nIn right triangle \( OT_1P \): \[ PT_1 = \sqrt{OP^2 - OT_1^2} \] Substituting \( OP = 6.5 \) cm and \( OT_1 = 3.5 \) cm: \[ PT_1 = \sqrt{(6.5)^2 - (3.5)^2} \] \[ PT_1 = \sqrt{42.25 - 12.25} \] \[ PT_1 = \sqrt{30} \approx 5.48 \text{ cm} \]

Answer: Each tangent has length \( \sqrt{30} \approx 5.48 \) cm.

Example 2

Question: A circle has its centre at point O with a radius of \( 5 \) cm. An external point Q is located \( 13 \) cm from O. Construct the two tangents from Q to the circle and calculate their length.

Solution: Step 1: Draw a circle with centre O and radius \( r = 5 \) cm. \nStep 2: Mark the external point Q such that \( OQ = 13 \) cm. \nStep 3: Find the midpoint M of OQ. So \( OM = \dfrac{13}{2} = 6.5 \) cm. \nStep 4: Draw a circle with centre M and radius \( 6.5 \) cm. It intersects the original circle at points T1 and T2. \nStep 5: Join Q to T1 and Q to T2. These are the required tangents. Since \( \angle OT_1Q = 90^\circ \) (angle in a semicircle), \( QT_1 \perp OT_1 \), confirming tangency. \nStep 6: Calculate the tangent length. In right triangle \( OT_1Q \): \[ QT_1 = \sqrt{OQ^2 - OT_1^2} \] Substituting \( OQ = 13 \) cm and \( OT_1 = 5 \) cm: \[ QT_1 = \sqrt{(13)^2 - (5)^2} \] \[ QT_1 = \sqrt{169 - 25} \] \[ QT_1 = \sqrt{144} = 12 \text{ cm} \]

Answer: Each tangent has length \( 12 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius 3.5 cm. From a point P at a distance of 8.5 cm from the centre O of the circle, construct the two tangents PA and PB to the circle. Measure the length of each tangent and verify your result.

Solution

  1. Step 1: Draw the Circle: Mark the centre O and draw a circle of radius \( r = 3.5 \) cm using a compass.
  2. Step 2: Mark the External Point: Mark a point P outside the circle such that the distance OP = 8.5 cm.
  3. Step 3: Find the Midpoint: Draw the line segment OP and find its midpoint M by drawing the perpendicular bisector of OP. The midpoint M is at a distance of \( \frac{8.5}{2} = 4.25 \) cm from both O and P.
  4. Step 4: Draw the Semicircle: With M as the centre and radius MP = MO = 4.25 cm, draw a semicircle (or a full circle) that passes through both O and P.
  5. Step 5: Mark the Points of Tangency: The semicircle drawn in Step 4 intersects the original circle of radius 3.5 cm at two points. Label these points A and B.
  6. Step 6: Draw the Tangents: Join PA and PB. These are the required tangents from the external point P to the circle.
  7. Step 7: Calculate the Theoretical Length: Using the Pythagorean theorem in triangle OAP, where OA is perpendicular to PA: \[ PA = \sqrt{OP^2 - OA^2} \] Substituting the values: \[ PA = \sqrt{(8.5)^2 - (3.5)^2} \] \[ PA = \sqrt{72.25 - 12.25} \] \[ PA = \sqrt{60} \] \[ PA \approx 7.75 \text{ cm} \]
  8. Step 8: Verification: Measure PA and PB using a ruler. Both tangents should each measure approximately 7.75 cm, confirming the construction. Also verify that OA is perpendicular to PA and OB is perpendicular to PB using a protractor.

Answer: Two tangents PA and PB are constructed from the external point P to the circle of radius \( 3.5 \) cm, each of length approximately \( \sqrt{60} \approx 7.75 \) cm.

Everything you get with Solver7

More questions in Geometric Contructions