SOLVER7 Study. Nothing Else.
Problem Set 10 Q4

Draw a circle of diameter \(6.4\ cm.\) Take a point \(R\) at a distance equal to its diameter from the centre. Draw tangents from point \(R.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle drawn on paper, like a coin. Now pick a point outside the coin. You can touch the edge of the coin with a straight ruler from that point in exactly two ways. Each touch happens at just one spot on the circle. Those two ruler lines are called tangents. They are always the same length. Here, the circle is about the size of a small button, and the outside point is placed at a known distance away. The tangent lines each turn out to be about \(5.54\ cm\) long.

Answer: Two tangents \(RP\) and \(RQ\) are constructed from the external point \(R\) to the circle, each of length approximately \(5.54\ cm\).

📖 Constructing Tangents from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. From any external point, exactly two tangents can be drawn to a circle, and they are equal in length. To construct these tangents, we use the fact that the angle between a tangent and the radius at the point of contact is \(90^\circ\). So if \(O\) is the centre and \(R\) is the external point, then the point of contact \(P\) lies on a circle whose diameter is \(OR\) (because the angle in a semicircle is \(90^\circ\)). Here, the diameter of the given circle is \(6.4\ cm\), so its radius is \(3.2\ cm\), and the external point \(R\) is at a distance of \(6.4\ cm\) from the centre \(O\).

Formula Used

Length of tangent from external point: \( \ell = \sqrt{OR^2 - r^2} \), where \(OR\) is the distance from the centre and \(r\) is the radius.

Solution

  1. Step 1: Draw a circle with centre \(O\) and radius \(r = \dfrac{6.4}{2} = 3.2\ cm\) using a compass.
  2. Step 2: From the centre \(O\), draw a straight line and mark a point \(R\) on it such that \(OR = 6.4\ cm\) (equal to the diameter). So \(R\) lies outside the circle.
  3. Step 3: Find the midpoint \(M\) of segment \(OR\). To do this, draw arcs of radius more than half of \(OR\) from both \(O\) and \(R\); the arcs intersect at two points. Join those points; the line cuts \(OR\) at its midpoint \(M\). Here \(OM = MR = 3.2\ cm\).
  4. Step 4: With \(M\) as centre and \(MO = 3.2\ cm\) as radius, draw a circle. This new circle passes through both \(O\) and \(R\), and it will intersect the original circle at two points. Call them \(P\) and \(Q\).
  5. Step 5: Join \(RP\) and \(RQ\). These are the required tangents from \(R\) to the given circle. The reason this works: \(\angle OPR\) and \(\angle OQR\) are inscribed in a semicircle of the second circle, so each equals \(90^\circ\). Since the radius is perpendicular to the tangent at the point of contact, \(RP\) and \(RQ\) are indeed tangents.
  6. Step 6: Verify the tangent length by calculation: \[ \ell = \sqrt{OR^2 - r^2} = \sqrt{(6.4)^2 - (3.2)^2} \] \[ \ell = \sqrt{40.96 - 10.24} = \sqrt{30.72} \approx 5.54\ cm \] On measuring \(RP\) and \(RQ\) with a ruler, you should get approximately \(5.5\ cm\).

Final Answer

Two tangents \(RP\) and \(RQ\) are constructed from the external point \(R\) to the circle, each of length approximately \(5.54\ cm\).

Common Mistake

A common mistake is to draw the second (auxiliary) circle with the wrong radius. Its radius must be exactly half of \(OR\) (so that \(OR\) is its diameter). If you use the radius of the original circle instead, the construction will not give correct tangents.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw the original circle: The given diameter is \(6.4\ cm\), so the radius is \(r = \dfrac{6.4}{2} = 3.2\ cm\). Using a compass, draw a circle with centre \(O\) and radius \(3.2\ cm\). — Reason: We need the circle from which the tangents will be drawn.
  2. Step 2: Locate the external point R: From centre \(O\), draw a straight ray and mark a point \(R\) on it such that \(OR = 6.4\ cm\). — Reason: The problem requires the external point to be at a distance equal to the diameter, i.e., \(6.4\ cm\) from the centre, which is clearly outside the circle since \(6.4 > 3.2\).
  3. Step 3: Find the midpoint M of OR: Using a compass, draw arcs of radius greater than half of \(OR\) from both \(O\) and \(R\). Connect the two intersection points of the arcs; this perpendicular bisector meets segment \(OR\) at its midpoint \(M\), giving \(OM = MR = 3.2\ cm\). — Reason: We need \(M\) so that we can draw a helper circle with diameter \(OR\), which will help us locate the points of tangency.
  4. Step 4: Draw the helper circle: With \(M\) as centre and radius \(MO = 3.2\ cm\), draw a second circle. This circle passes through both \(O\) and \(R\). — Reason: Any point on a circle with diameter \(OR\) subtends a right angle at \(OR\) (angle in a semicircle). Since the tangent meets the radius at \(90^\circ\), the points where the helper circle cuts the original circle are exactly the points of tangency \(P\) and \(Q\).
  5. Step 5: Mark the points of tangency: Label the two points where the helper circle intersects the original circle as \(P\) and \(Q\). — Reason: At each of these points, the angle \(\angle OPR = \angle OQR = 90^\circ\), confirming they are valid points of tangency.
  6. Step 6: Draw the tangents: Join \(R\) to \(P\) and \(R\) to \(Q\). These two line segments \(RP\) and \(RQ\) are the required tangents from the external point \(R\) to the circle. — Reason: A line from an external point through a point of tangency, where the radius is perpendicular, is by definition a tangent.
  7. Step 7: Verify the length using the formula: Substituting \(OR = 6.4\ cm\) and \(r = 3.2\ cm\) into the tangent-length formula: \[ \ell = \sqrt{OR^2 - r^2} = \sqrt{(6.4)^2 - (3.2)^2} \] \[ = \sqrt{40.96 - 10.24} = \sqrt{30.72} \approx 5.54\ cm \] — Reason: This confirms that both tangents \(RP\) and \(RQ\) each measure approximately \(5.54\ cm\), consistent with the construction.

Final Answer

Two tangents \(RP\) and \(RQ\) are constructed from the external point \(R\) to the circle, each of length approximately \(5.54\ cm\).

Common Mistake

One common mistake: Students sometimes place the external point \(R\) at a distance equal to the radius instead of the full diameter from the centre, making \(R\) fall on the circle itself — from which no tangent can be drawn to reach two separate points.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: diameter \(= 6.4\ cm\), so radius \(r = 3.2\ cm\); distance \(OR = 6.4\ cm\).
  2. Step 2: Draw circle with centre \(O\), radius \(3.2\ cm\); mark point \(R\) with \(OR = 6.4\ cm\); bisect \(OR\) to get midpoint \(M\) with \(OM = 3.2\ cm\).
  3. Step 3: Draw a second circle with centre \(M\) and radius \(3.2\ cm\); it intersects the original circle at points \(P\) and \(Q\); join \(RP\) and \(RQ\).
  4. Step 4: Verification: \(\ell = \sqrt{(6.4)^2 - (3.2)^2} = \sqrt{40.96 - 10.24} = \sqrt{30.72} \approx 5.54\ cm\).

Answer: Two tangents \(RP\) and \(RQ\) are constructed from the external point \(R\) to the circle, each of length approximately \(5.54\ cm\).

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 2.5 \) cm. Take a point \( P \) at a distance of \( 7.5 \) cm from the centre \( O \) of the circle. Construct the two tangents from \( P \) to the circle and measure their lengths.

Solution: Step 1 — Draw the circle. Draw a circle with centre \( O \) and radius \( r = 2.5 \) cm. \nStep 2 — Mark the external point. Mark point \( P \) such that \( OP = 7.5 \) cm. \nStep 3 — Find the midpoint. Let \( M \) be the midpoint of \( OP \), so \( OM = MP = 3.75 \) cm. \nStep 4 — Draw the auxiliary circle. With \( M \) as centre and radius \( 3.75 \) cm, draw a circle. This circle passes through \( O \) and \( P \). \nStep 5 — Mark intersection points. Let \( A \) and \( B \) be the two points where the auxiliary circle meets the original circle. \nStep 6 — Draw tangents. Join \( P \) to \( A \) and \( P \) to \( B \). These are the required tangents. \nStep 7 — Calculate the tangent length. Using the formula: \[ PA = \sqrt{OP^2 - r^2} \] Substituting values: \[ PA = \sqrt{(7.5)^2 - (2.5)^2} \] \[ PA = \sqrt{56.25 - 6.25} \] \[ PA = \sqrt{50} \] \[ PA = 5\sqrt{2} \approx 7.07 \text{ cm} \] Both tangents \( PA \) and \( PB \) are equal in length.

Answer: Each tangent length \( = 5\sqrt{2} \approx 7.07 \) cm

Example 2

Question: A circle has a diameter of \( 5 \) cm. A point \( Q \) is located at a distance equal to one and a half times the diameter from the centre. Construct the tangents from \( Q \) to the circle and find their lengths.

Solution: Step 1 — Find the key measurements. The radius is \( r = 2.5 \) cm. One and a half times the diameter means the distance from the centre is \( 1.5 \times 5 = 7.5 \) cm, so \( OQ = 7.5 \) cm. \nStep 2 — Draw the circle. Draw a circle with centre \( O \) and radius \( 2.5 \) cm. \nStep 3 — Mark the external point. Mark point \( Q \) at a distance of \( 7.5 \) cm from \( O \). \nStep 4 — Find the midpoint. Let \( N \) be the midpoint of \( OQ \), so \( ON = NQ = 3.75 \) cm. \nStep 5 — Draw the auxiliary circle. With \( N \) as centre and \( 3.75 \) cm as radius, draw a circle that passes through both \( O \) and \( Q \). \nStep 6 — Mark intersection points. Let \( C \) and \( D \) be the points where this auxiliary circle intersects the original circle. By the theorem, \( \angle OCQ = 90^\circ \) and \( \angle ODQ = 90^\circ \). \nStep 7 — Draw tangents. Join \( Q \) to \( C \) and \( Q \) to \( D \). These are the required tangents. \nStep 8 — Calculate the tangent length. \[ QC = \sqrt{OQ^2 - r^2} \] Substituting values: \[ QC = \sqrt{(7.5)^2 - (2.5)^2} \] \[ QC = \sqrt{56.25 - 6.25} \] \[ QC = \sqrt{50} = 5\sqrt{2} \approx 7.07 \text{ cm} \] Both tangents \( QC \) and \( QD \) are equal in length.

Answer: Each tangent length \( = 5\sqrt{2} \approx 7.07 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius \(3\ \text{cm}\). Take an external point \(P\) at a distance of \(7\ \text{cm}\) from the centre of the circle. Construct the two tangents from point \(P\) to the circle and measure their lengths. Also verify the length using the Pythagorean theorem.

Solution

  1. Step 1: Draw the circle: Draw a circle with centre \(O\) and radius \(r = 3\ \text{cm}\).
  2. Step 2: Mark the external point: Mark an external point \(P\) such that the distance \(OP = 7\ \text{cm}\).
  3. Step 3: Find the midpoint: Find the midpoint \(M\) of the segment \(OP\). The distance \(OM = MP = \frac{7}{2} = 3.5\ \text{cm}\).
  4. Step 4: Draw the auxiliary circle: With \(M\) as centre and radius \(3.5\ \text{cm}\), draw another circle. This circle passes through both \(O\) and \(P\) (since angle in a semicircle is \(90°\)).
  5. Step 5: Mark the tangent points: Let the two auxiliary circle intersect the original circle at points \(A\) and \(B\). Join \(PA\) and \(PB\). These are the required tangents from \(P\) to the circle.
  6. Step 6: Verify using the Pythagorean theorem: Since the radius \(OA\) is perpendicular to the tangent \(PA\) at the point of contact, triangle \(OAP\) is right-angled at \(A\). Using the Pythagorean theorem: \[PA = \sqrt{OP^2 - OA^2}\] Substituting the values \(OP = 7\ \text{cm}\) and \(OA = 3\ \text{cm}\): \[PA = \sqrt{7^2 - 3^2} = \sqrt{49 - 9} = \sqrt{40} \approx 6.32\ \text{cm}\]
  7. Step 7: Conclusion: Both tangents \(PA\) and \(PB\) are equal in length (tangents from an external point are equal). Each tangent measures approximately \(6.32\ \text{cm}\), which matches the measured length on the construction.

Answer: Two tangents \(PA\) and \(PB\) are constructed from the external point \(P\) to the circle, each of length approximately \(6.32\ \text{cm}\) (since \(\sqrt{49 - 9} = \sqrt{40} \approx 6.32\ \text{cm}\)).

Everything you get with Solver7

More questions in Geometric Contructions