SOLVER7 Study. Nothing Else.
Chapter 10 Examples Q1

\(\Delta ABC \sim \Delta PQR,\) in \(\Delta ABC,\ AB=5.4\ cm,\ BC=4.2\ cm,\ AC=6.0\ cm.\) \(AB:PQ=3:2.\) Construct \(\Delta ABC\) and \(\Delta PQR.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you draw a big triangle on paper, then shrink it like a photo on your phone. The smaller triangle looks exactly the same shape, just tinier. Here, the big triangle has sides of 5.4 cm, 4.2 cm, and 6.0 cm. The small triangle is shrunk to two-thirds of that size. Multiply each side by two-thirds and you get the new, smaller triangle with sides 3.6 cm, 2.8 cm, and 4.0 cm. Both triangles are drawn using a ruler and compass.

Answer: Sides of \(\Delta PQR\) are \(PQ = 3.6\) cm, \(QR = 2.8\) cm, \(PR = 4.0\) cm. Construct \(\Delta ABC\) with sides \(5.4\) cm, \(4.2\) cm, \(6.0\) cm and \(\Delta PQR\) with sides \(3.6\) cm, \(2.8\) cm, \(4.0\) cm using the SSS method.

📖 Construction of Similar Triangles

Detailed Explanation

When two triangles are similar, their corresponding sides are in the same ratio (called the scale factor). Here \(\Delta ABC \sim \Delta PQR\) means the sides correspond as \(AB \leftrightarrow PQ\), \(BC \leftrightarrow QR\) and \(AC \leftrightarrow PR\). Since \(AB:PQ = 3:2\), every side of \(\Delta PQR\) is \(\dfrac{2}{3}\) of the corresponding side of \(\Delta ABC\). So we first find the sides of \(\Delta PQR\) using this ratio, then construct both triangles using ruler and compass (SSS construction).

Formula Used

If \(\Delta ABC \sim \Delta PQR\), then \(\dfrac{AB}{PQ} = \dfrac{BC}{QR} = \dfrac{AC}{PR}\).

Solution

  1. Step 1: Find the sides of \(\Delta PQR\): Given \(\dfrac{AB}{PQ} = \dfrac{3}{2}\), so scale factor for \(\Delta PQR\) is \(\dfrac{2}{3}\). Therefore \[PQ = \dfrac{2}{3} \times AB = \dfrac{2}{3} \times 5.4 = 3.6 \text{ cm}\] \[QR = \dfrac{2}{3} \times BC = \dfrac{2}{3} \times 4.2 = 2.8 \text{ cm}\] \[PR = \dfrac{2}{3} \times AC = \dfrac{2}{3} \times 6.0 = 4.0 \text{ cm}\]
  2. Step 2: Rough sketch: Draw a rough figure of \(\Delta ABC\) with the given sides marked, and a rough figure of \(\Delta PQR\) with \(PQ = 3.6\) cm, \(QR = 2.8\) cm, \(PR = 4.0\) cm. This helps plan the construction.
  3. Step 3: Construct \(\Delta ABC\): (i) Draw segment \(BC = 4.2\) cm. (ii) With B as centre and radius \(5.4\) cm, draw an arc (this locates A from B, since \(AB = 5.4\) cm). (iii) With C as centre and radius \(6.0\) cm, draw another arc to cut the first arc at point A. (iv) Join AB and AC. Triangle ABC is ready.
  4. Step 4: Construct \(\Delta PQR\): (i) Draw segment \(QR = 2.8\) cm. (ii) With Q as centre and radius \(PQ = 3.6\) cm, draw an arc. (iii) With R as centre and radius \(PR = 4.0\) cm, draw another arc to cut the first arc at point P. (iv) Join PQ and PR. Triangle PQR is ready.
  5. Step 5: Verify similarity: Check the ratios: \[\dfrac{AB}{PQ} = \dfrac{5.4}{3.6} = \dfrac{3}{2}\] \[\dfrac{BC}{QR} = \dfrac{4.2}{2.8} = \dfrac{3}{2}\] \[\dfrac{AC}{PR} = \dfrac{6.0}{4.0} = \dfrac{3}{2}\] All ratios are equal, so by SSS similarity \(\Delta ABC \sim \Delta PQR\).

Final Answer

Sides of \(\Delta PQR\) are \(PQ = 3.6\) cm, \(QR = 2.8\) cm, \(PR = 4.0\) cm. Construct \(\Delta ABC\) with sides \(5.4\) cm, \(4.2\) cm, \(6.0\) cm and \(\Delta PQR\) with sides \(3.6\) cm, \(2.8\) cm, \(4.0\) cm using the SSS method.

Common Mistake

A common mistake is to confuse the direction of the ratio. Since \(AB:PQ = 3:2\), \(PQ\) is smaller than \(AB\), so \(PQ = \dfrac{2}{3} \times AB\), not \(\dfrac{3}{2} \times AB\). Students often multiply by \(\dfrac{3}{2}\) and get a larger triangle by mistake.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the scale factor. We are told \(AB : PQ = 3 : 2\), which means \[\frac{AB}{PQ} = \frac{3}{2}\] So every side of \(\Delta PQR\) is \(\frac{2}{3}\) of the corresponding side of \(\Delta ABC\). — Reason: The scale factor tells us by how much each side of \(\Delta PQR\) is scaled down from \(\Delta ABC\).
  2. Step 2: Calculate \(PQ\) using the scale factor applied to \(AB = 5.4\) cm: \[PQ = \frac{2}{3} \times 5.4 = 3.6 \text{ cm}\] — Reason: Since \(AB \leftrightarrow PQ\) in the similarity correspondence, we multiply \(AB\) by the scale factor \(\frac{2}{3}\).
  3. Step 3: Calculate \(QR\) using the scale factor applied to \(BC = 4.2\) cm: \[QR = \frac{2}{3} \times 4.2 = 2.8 \text{ cm}\] — Reason: Since \(BC \leftrightarrow QR\) in the similarity correspondence, we multiply \(BC\) by the same scale factor \(\frac{2}{3}\).
  4. Step 4: Calculate \(PR\) using the scale factor applied to \(AC = 6.0\) cm: \[PR = \frac{2}{3} \times 6.0 = 4.0 \text{ cm}\] — Reason: Since \(AC \leftrightarrow PR\) in the similarity correspondence, we apply the same scale factor \(\frac{2}{3}\) to find the third side of \(\Delta PQR\).
  5. Step 5: Draw rough sketches of both triangles — label \(\Delta ABC\) with sides \(5.4\) cm, \(4.2\) cm, \(6.0\) cm and \(\Delta PQR\) with sides \(3.6\) cm, \(2.8\) cm, \(4.0\) cm before starting the actual construction. — Reason: A rough sketch helps you plan which side to draw as the base and how to position the arcs, reducing errors during actual construction.
  6. Step 6: Construct \(\Delta ABC\) using the SSS method: (i) Draw a line segment \(BC = 4.2\) cm. (ii) With \(B\) as centre and radius \(5.4\) cm (equal to \(AB\)), draw an arc above \(BC\). (iii) With \(C\) as centre and radius \(6.0\) cm (equal to \(AC\)), draw another arc to intersect the first arc at point \(A\). (iv) Join \(A\) to \(B\) and \(A\) to \(C\). — Reason: The two arcs intersect at exactly the point that is simultaneously \(5.4\) cm from \(B\) and \(6.0\) cm from \(C\), uniquely determining vertex \(A\).
  7. Step 7: Construct \(\Delta PQR\) using the SSS method: (i) Draw a line segment \(QR = 2.8\) cm. (ii) With \(Q\) as centre and radius \(3.6\) cm (equal to \(PQ\)), draw an arc above \(QR\). (iii) With \(R\) as centre and radius \(4.0\) cm (equal to \(PR\)), draw another arc to intersect the first arc at point \(P\). (iv) Join \(P\) to \(Q\) and \(P\) to \(R\). — Reason: The same SSS arc-intersection logic locates vertex \(P\) uniquely, completing \(\Delta PQR\) which is similar to \(\Delta ABC\) in the ratio \(2:3\).

Final Answer

Sides of \(\Delta PQR\) are \(PQ = 3.6\) cm, \(QR = 2.8\) cm, \(PR = 4.0\) cm. Construct \(\Delta ABC\) with sides \(5.4\) cm, \(4.2\) cm, \(6.0\) cm and \(\Delta PQR\) with sides \(3.6\) cm, \(2.8\) cm, \(4.0\) cm using the SSS method.

Common Mistake

One common mistake: Students sometimes apply the scale factor as \(\frac{3}{2}\) instead of \(\frac{2}{3}\) when finding the sides of \(\Delta PQR\), making \(\Delta PQR\) larger than \(\Delta ABC\) — remember, since \(AB : PQ = 3 : 2\), the sides of \(\Delta PQR\) are smaller, so you must multiply by \(\frac{2}{3}\), not \(\frac{3}{2}\).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Find sides of \(\Delta PQR\): \[PQ = \dfrac{2}{3} \times 5.4 = 3.6 \text{ cm}, \quad QR = \dfrac{2}{3} \times 4.2 = 2.8 \text{ cm}, \quad PR = \dfrac{2}{3} \times 6.0 = 4.0 \text{ cm}\]
  2. Step 2: Construct \(\Delta ABC\) (SSS): Draw \(BC = 4.2\) cm; arc of radius \(5.4\) cm from \(B\) and arc of radius \(6.0\) cm from \(C\) intersect at \(A\); join \(AB\) and \(AC\).
  3. Step 3: Construct \(\Delta PQR\) (SSS): Draw \(QR = 2.8\) cm; arc of radius \(3.6\) cm from \(Q\) and arc of radius \(4.0\) cm from \(R\) intersect at \(P\); join \(PQ\) and \(PR\).

Answer: Sides of \(\Delta PQR\) are \(PQ = 3.6\) cm, \(QR = 2.8\) cm, \(PR = 4.0\) cm. Construct \(\Delta ABC\) with sides \(5.4\) cm, \(4.2\) cm, \(6.0\) cm and \(\Delta PQR\) with sides \(3.6\) cm, \(2.8\) cm, \(4.0\) cm using the SSS method.

➕ More Examples

More Examples

Example 1

Question: \( \Delta ABC \sim \Delta DEF \). In \( \Delta ABC \), \( AB = 6.0 \) cm, \( BC = 4.8 \) cm, and \( AC = 5.4 \) cm. The ratio \( AB : DE = 3 : 2 \). Construct \( \Delta ABC \) and \( \Delta DEF \).

Solution: Step 1: Identify the scale factor. The ratio \( AB : DE = 3 : 2 \), so the scale factor from \( \Delta ABC \) to \( \Delta DEF \) is \( \dfrac{2}{3} \). Step 2: Calculate the sides of \( \Delta DEF \). Since \( \Delta ABC \sim \Delta DEF \): \[ \frac{AB}{DE} = \frac{BC}{EF} = \frac{AC}{DF} = \frac{3}{2} \] Finding DE: \[ DE = \frac{2}{3} \times AB = \frac{2}{3} \times 6.0 = 4.0 \text{ cm} \] Finding EF: \[ EF = \frac{2}{3} \times BC = \frac{2}{3} \times 4.8 = 3.2 \text{ cm} \] Finding DF: \[ DF = \frac{2}{3} \times AC = \frac{2}{3} \times 5.4 = 3.6 \text{ cm} \] Step 3: Construct \( \Delta ABC \) with sides \( AB = 6.0 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm using SSS construction. Step 4: Construct \( \Delta DEF \) with sides \( DE = 4.0 \) cm, \( EF = 3.2 \) cm, \( DF = 3.6 \) cm using SSS construction.

Answer: Sides of \( \Delta DEF \): \( DE = 4.0 \) cm, \( EF = 3.2 \) cm, \( DF = 3.6 \) cm.

Example 2

Question: \( \Delta LMN \sim \Delta XYZ \). In \( \Delta LMN \), \( LM = 4.5 \) cm, \( MN = 3.6 \) cm, and \( LN = 5.4 \) cm. The ratio \( LM : XY = 3 : 4 \). Construct \( \Delta LMN \) and \( \Delta XYZ \).

Solution: Step 1: Identify the scale factor. The ratio \( LM : XY = 3 : 4 \), so the scale factor from \( \Delta LMN \) to \( \Delta XYZ \) is \( \dfrac{4}{3} \). Step 2: Calculate the sides of \( \Delta XYZ \). Since \( \Delta LMN \sim \Delta XYZ \): \[ \frac{LM}{XY} = \frac{MN}{YZ} = \frac{LN}{XZ} = \frac{3}{4} \] Finding XY: \[ XY = \frac{4}{3} \times LM = \frac{4}{3} \times 4.5 = 6.0 \text{ cm} \] Finding YZ: \[ YZ = \frac{4}{3} \times MN = \frac{4}{3} \times 3.6 = 4.8 \text{ cm} \] Finding XZ: \[ XZ = \frac{4}{3} \times LN = \frac{4}{3} \times 5.4 = 7.2 \text{ cm} \] Step 3: Construct \( \Delta LMN \) with sides \( LM = 4.5 \) cm, \( MN = 3.6 \) cm, \( LN = 5.4 \) cm using SSS construction. Step 4: Construct \( \Delta XYZ \) with sides \( XY = 6.0 \) cm, \( YZ = 4.8 \) cm, \( XZ = 7.2 \) cm using SSS construction.

Answer: Sides of \( \Delta XYZ \): \( XY = 6.0 \) cm, \( YZ = 4.8 \) cm, \( XZ = 7.2 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: \( \Delta LMN \sim \Delta XYZ \). In \( \Delta LMN \), \( LM = 6.0 \) cm, \( MN = 4.5 \) cm, and \( LN = 7.5 \) cm. If \( LM : XY = 4 : 3 \), construct \( \Delta LMN \) and \( \Delta XYZ \).

Solution

  1. Step 1: Understand the given ratio: We are given \( LM : XY = 4 : 3 \). Since \( \Delta LMN \sim \Delta XYZ \), all corresponding sides are in the same ratio \( 4 : 3 \). So \[ \frac{LM}{XY} = \frac{MN}{YZ} = \frac{LN}{XZ} = \frac{4}{3} \]
  2. Step 2: Find side XY: Using \( \frac{LM}{XY} = \frac{4}{3} \), we get \[ XY = \frac{3}{4} \times LM = \frac{3}{4} \times 6.0 = 4.5 \text{ cm} \]
  3. Step 3: Find side YZ: Using \( \frac{MN}{YZ} = \frac{4}{3} \), we get \[ YZ = \frac{3}{4} \times MN = \frac{3}{4} \times 4.5 = 3.375 \approx 3.4 \text{ cm} \]
  4. Step 4: Find side XZ: Using \( \frac{LN}{XZ} = \frac{4}{3} \), we get \[ XZ = \frac{3}{4} \times LN = \frac{3}{4} \times 7.5 = 5.625 \ approx 5.6 \text{ cm} \]
  5. Step 5: Construct Triangle LMN: Draw \( MN = 4.5 \) cm as the base. With centre M, draw an arc of radius \( LM = 6.0 \) cm. With centre N, draw an arc of radius \( LN = 7.5 \) cm. Mark the intersection as L. Join LM and LN to complete \( \Delta LMN \).
  6. Step 6: Construct Triangle XYZ: Draw \( YZ = 3.4 \) cm as the base. With centre Y, draw an arc of radius \( XY = 4.5 \) cm. With centre Z, draw an arc of radius \( XZ = 5.6 \) cm. Mark the intersection as X. Join XY and XZ to complete \( \Delta XYZ \).

Answer: The sides of \( \Delta XYZ \) are \( XY = 4.5 \) cm, \( YZ = 3.4 \) cm, and \( XZ = 5.6 \) cm. Construct \( \Delta LMN \) with sides \( 6.0 \) cm, \( 4.5 \) cm, \( 7.5 \) cm and \( \Delta XYZ \) with sides \( 4.5 \) cm, \( 3.4 \) cm, \( 5.6 \) cm using the SSS method.

Everything you get with Solver7

More questions in Geometric Contructions