SOLVER7 Study. Nothing Else.
2025 Board Paper QB (ii)

Draw a circle with centre \(O\) of radius \(3.4\ cm.\) Draw a chord \(MN\) of length \(5.7\ cm\) in it. Construct tangents at point \(M\) and \(N\) to the circle.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a ball sitting on a flat table. The table only touches the ball at one tiny point. That touching line is like a tangent! A radius is a line from the centre of the circle to the edge. The tangent always stands perfectly straight up against the radius at that point. To draw two tangents on a circle, pick two points on the circle, draw lines from the centre to each point, then draw a new line crossing each radius at a perfect right angle. Those crossing lines are your tangents.

Answer: Lines \(l\) (perpendicular to \(OM\) at \(M\)) and \(m\) (perpendicular to \(ON\) at \(N\)) are the required tangents to the circle at points \(M\) and \(N\) respectively.

📖 Constructing Tangents at the Endpoints of a Chord

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. A very important property is: the tangent at any point on a circle is perpendicular to the radius drawn to that point. So, to draw a tangent at a given point on the circle, we just need to draw a line perpendicular to the radius at that point. In this problem, we first draw the circle and mark the chord \(MN\). Then we join \(OM\) and \(ON\) (the radii to \(M\) and \(N\)) and construct perpendiculars to these radii at \(M\) and \(N\) respectively. These perpendiculars are the required tangents.

Formula Used

Tangent-Radius Property: At the point of contact, tangent \(\perp\) radius. That is, if \(PT\) is a tangent at point \(P\) on a circle with centre \(O\), then \(OP \perp PT\).

Solution

  1. Step 1: Draw a circle with centre \(O\) and radius \(3.4\ cm\). Using a compass, set the width to \(3.4\ cm\), place the needle at a point \(O\) on the paper, and draw a complete circle.
  2. Step 2: Mark a point \(M\) anywhere on the circle. With \(M\) as centre and radius \(5.7\ cm\), draw a small arc that cuts the circle at another point. Label this point \(N\). Join \(M\) and \(N\). Now \(MN\) is a chord of length \(5.7\ cm\).
  3. Step 3: Join \(OM\) and \(ON\). These are the radii drawn to the points \(M\) and \(N\), where we want to draw the tangents. We use them because the tangent at a point is perpendicular to the radius at that point.
  4. Step 4: At point \(M\), construct a line perpendicular to \(OM\). To do this, place the compass at \(M\), draw arcs on both sides of \(OM\) cutting it, and then from those two arc points draw intersecting arcs on the far side of \(M\). Join \(M\) to this intersection point and extend the line on both sides. Call this line \(l\). Line \(l\) is the tangent to the circle at \(M\).
  5. Step 5: Similarly, at point \(N\), construct a line perpendicular to \(ON\) using the same compass method. Extend this line on both sides. Call this line \(m\). Line \(m\) is the tangent to the circle at \(N\).
  6. Step 6: The two lines \(l\) and \(m\) are the required tangents at \(M\) and \(N\). If extended, they will meet at some external point (since \(MN\) is not a diameter), confirming they are not parallel.

Final Answer

Lines \(l\) (perpendicular to \(OM\) at \(M\)) and \(m\) (perpendicular to \(ON\) at \(N\)) are the required tangents to the circle at points \(M\) and \(N\) respectively.

Common Mistake

A common mistake is to draw the tangent perpendicular to the chord \(MN\) instead of perpendicular to the radius \(OM\) (or \(ON\)). Always remember: the tangent at a point is perpendicular to the radius at that point, not to the chord.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \(O\) and radius \(3.4 \text{ cm}\) using a compass. — Reason: This is the circle on which we need to construct the tangents, so we begin by drawing it accurately.
  2. Step 2: Mark any point \(M\) on the circle. Then, keeping your compass set to \(5.7 \text{ cm}\), place the needle at \(M\) and draw an arc that intersects the circle at a second point. Label that second point \(N\), and draw the segment \(MN\). — Reason: This creates chord \(MN\) of the required length \(5.7 \text{ cm}\); we need two points on the circle so we can draw a tangent at each.
  3. Step 3: Draw line segments \(OM\) and \(ON\) by joining the centre \(O\) to each of the points \(M\) and \(N\). — Reason: These are the radii at the points of contact. The tangent-radius property tells us that the required tangent at each point must be perpendicular to the radius at that point, so we need these radii visible on our figure.
  4. Step 4: At point \(M\), construct a line \(l\) that is perpendicular to segment \(OM\). (Use a compass-and-ruler construction: draw equal arcs on both sides of \(M\) along \(OM\), then draw arcs of equal radius from those two points to locate a point above and below; the line through those two points is perpendicular to \(OM\) at \(M\).) — Reason: By the tangent-radius property, \(l \perp OM\) at \(M\) ensures that \(l\) is the tangent to the circle at \(M\).
  5. Step 5: At point \(N\), construct a line \(m\) that is perpendicular to segment \(ON\), using the same compass-and-ruler method as in Step 4. — Reason: Applying the same tangent-radius property at \(N\), the line \(m \perp ON\) at \(N\) is the tangent to the circle at \(N\).
  6. Step 6: Verify your construction: each of \(l\) and \(m\) should touch the circle at exactly one point (\(M\) and \(N\) respectively) and form a \(90 \circ\) angle with the corresponding radius. — Reason: Checking this confirms that the constructed lines satisfy the definition of a tangent and the tangent-radius property.

Final Answer

Lines \(l\) (perpendicular to \(OM\) at \(M\)) and \(m\) (perpendicular to \(ON\) at \(N\)) are the required tangents to the circle at points \(M\) and \(N\) respectively.

Common Mistake

One common mistake: Students sometimes draw the perpendicular at the wrong location — for example, drawing a perpendicular to chord \(MN\) from \(O\) instead of drawing perpendiculars to the radii \(OM\) and \(ON\) at the points \(M\) and \(N\). Remember, the tangent must be perpendicular to the radius at the point of contact on the circle, not perpendicular to the chord.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( O \) and radius \( 3.4 \) cm. Mark point \( M \) on the circle; with \( M \) as centre and radius \( 5.7 \) cm, mark point \( N \) on the circle so that chord \( MN = 5.7 \) cm.
  2. Step 2: Join radii \( OM \) and \( ON \).
  3. Step 3: At \( M \), construct line \( l \perp OM \); at \( N \), construct line \( m \perp ON \).

Answer: Lines \(l\) (perpendicular to \(OM\) at \(M\)) and \(m\) (perpendicular to \(ON\) at \(N\)) are the required tangents to the circle at points \(M\) and \(N\) respectively.

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre O of radius \( 4.2 \) cm. Draw a chord PQ of length \( 6.4 \) cm in it. Construct tangents at points P and Q to the circle. Also find the angle between the two tangents if \( \angle POQ \) is the angle subtended by the chord at the centre.

Solution: Construction Steps: 1. Draw a circle with centre O and radius \( r = 4.2 \) cm. 2. To draw chord PQ of length 6.4 cm: Mark a point P on the circle. With P as centre and radius 6.4 cm, mark another point Q on the circle. Join PQ — this is the required chord. 3. Join OP and OQ (radii to the endpoints of the chord). 4. At point P, draw a line perpendicular to OP. This is the tangent at P. 5. At point Q, draw a line perpendicular to OQ. This is the tangent at Q. \nFinding the angle between the tangents: \nFirst, find \( \angle POQ \) using the triangle OPQ where OP = OQ = 4.2 cm and PQ = 6.4 cm. \nUsing the cosine rule: \[ \cos(\angle POQ) = \frac{OP^2 + OQ^2 - PQ^2}{2 \cdot OP \cdot OQ} \] \nSubstituting the values: \[ \cos(\angle POQ) = \frac{(4.2)^2 + (4.2)^2 - (6.4)^2}{2 \times 4.2 \times 4.2} \] \nCalculating numerator: \[ (4.2)^2 = 17.64, \quad (6.4)^2 = 40.96 \] \nSo the numerator is \( 17.64 + 17.64 - 40.96 = -5.68 \) and denominator is \( 2 \times 17.64 = 35.28 \). \nThus: \[ \cos(\angle POQ) = \frac{-5.68}{35.28} \approx -0.161 \] \nSo \( \angle POQ \approx 99.3^\circ \). \nSince in quadrilateral OPXQ (where X is the intersection of the tangents), the sum of angles is \( 360^\circ \) and \( \angle OPX = \angle OQX = 90^\circ \): \[ \angle PXQ = 360^\circ - 90^\circ - 90^\circ - \angle POQ \] \nTherefore: \[ \angle PXQ = 360^\circ - 180^\circ - 99.3^\circ = 80.7^\circ \]

Answer: Tangents at P and Q are constructed perpendicular to radii OP and OQ respectively. The angle between the two tangents is approximately \( 80.7^\circ \).

Example 2

Question: Draw a circle with centre O of radius \( 3.8 \) cm. Draw a chord AB of length \( 5.2 \) cm in it. Construct tangents at points A and B to the circle. Verify that the tangents at the endpoints of a chord, when they meet, lie on the line that passes through the centre O.

Solution: Construction Steps: 1. Draw a circle with centre O and radius \( r = 3.8 \) cm. 2. To draw chord AB of length 5.2 cm: Mark point A on the circle. Using a compass with radius 5.2 cm centred at A, mark point B on the circle. Join AB. 3. Join OA and OB (these are radii to the chord endpoints). 4. At point A, construct a perpendicular to OA — this gives the tangent at A. 5. At point B, construct a perpendicular to OB — this gives the tangent at B. 6. Extend the tangents until they meet at point T. \nVerification step — finding \( \angle AOB \): \nUsing the cosine rule in triangle OAB: \[ \cos(\angle AOB) = \frac{OA^2 + OB^2 - AB^2}{2 \cdot OA \cdot OB} \] \nSubstituting: \[ \cos(\angle AOB) = \frac{(3.8)^2 + (3.8)^2 - (5.2)^2}{2 \times 3.8 \times 3.8} \] \nCalculating: \( (3.8)^2 = 14.44 \) and \( (5.2)^2 = 27.04 \). \nNumerator: \( 14.44 + 14.44 - 27.04 = 1.84 \). Denominator: \( 2 \times 14.44 = 28.88 \). \nSo: \[ \cos(\angle AOB) = \frac{1.84}{28.88} \approx 0.0637 \] \nThus \( \angle AOB \approx 86.3^\circ \). \nThe angle at T between the tangents: \[ \angle ATB = 180^\circ - \angle AOB = 180^\circ - 86.3^\circ = 93.7^\circ \] \nNote: The property that the intersection point T, the midpoint M of chord AB, and the centre O are collinear can be verified because OA = OB (radii), making triangle OAB isosceles. The perpendicular from O to AB bisects AB, and the same perpendicular bisector passes through T (since TA = TB by equal tangent lengths). Hence T, M, and O all lie on the perpendicular bisector of AB, confirming they are collinear.

Answer: Tangents at A and B are constructed perpendicular to OA and OB respectively. The angle \( \angle AOB \approx 86.3^\circ \) and \( \angle ATB \approx 93.7^\circ \). The meeting point T of the tangents lies on the line through O perpendicular to chord AB, confirming T, midpoint of AB, and O are collinear.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \) of radius \( 4.2 \) cm. Draw a chord \( PQ \) of length \( 6.4 \) cm in it. Construct tangents at points \( P \) and \( Q \) to the circle. Write the names of the tangent lines you have drawn.

Solution

  1. Step 1: Draw the circle: Draw a circle with centre \( O \) and radius \( 4.2 \) cm using a compass.
  2. Step 2: Draw the chord PQ: Mark any point \( P \) on the circle. Using a ruler, mark point \( Q \) on the circle such that the chord \( PQ = 6.4 \) cm. Draw the chord \( PQ \).
  3. Step 3: Draw radius OP and radius OQ: Join \( O \) to \( P \) and \( O \) to \( Q \) to get the two radii \( OP \) and \( OQ \).
  4. Step 4: Construct tangent at P: At point \( P \), construct a line \( p \) perpendicular to the radius \( OP \). This is done by using a set square or compass construction to draw a \( 90^{\circ} \) angle at \( P \) with respect to \( OP \). Line \( p \) is the tangent to the circle at \( P \).
  5. Step 5: Construct tangent at Q: At point \( Q \), construct a line \( q \) perpendicular to the radius \( OQ \). Draw a \( 90^{\circ} \) angle at \( Q \) with respect to \( OQ \). Line \( q \) is the tangent to the circle at \( Q \).
  6. Step 6: Observe the tangents: Lines \( p \) and \( q \) are the required tangents at \( P \) and \( Q \) respectively. Since \( PQ \) is not a diameter, the two tangents \( p \) and \( q \) will meet at a point when extended (they are not parallel). If \( PQ \) were a diameter, the tangents would be parallel.

Answer: Line \( p \) (perpendicular to \( OP \) at \( P \)) and line \( q \) (perpendicular to \( OQ \) at \( Q \)) are the required tangents to the circle at points \( P \) and \( Q \) respectively. Since the chord \( PQ = 6.4 \) cm is not a diameter of the circle of radius \( 4.2 \) cm, the two tangents \( p \) and \( q \) are not parallel and will intersect when extended.

Everything you get with Solver7

More questions in Geometric Contructions