SOLVER7 Study. Nothing Else.
2024 Board Paper QB (ii)

Draw a circle with centre \(P\) and radius \(3.5\ cm.\) Take point \(Q\) at a distance \(8\ cm\) from the centre. Construct tangents to the circle from point \(Q.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a round pond with a fence post at its centre. You are standing far away from the pond. You can stretch two ropes from where you are, each just barely touching the edge of the pond. Those ropes are called tangents. They touch the pond at exactly one spot each. A clever trick helps us find those touching spots using a second, helper circle drawn between you and the pond's centre. Where the helper circle crosses the pond's edge marks the exact touching points.

Answer: Tangents \(QA\) and \(QB\) are successfully constructed from point \(Q\) to the circle with centre \(P\) and radius \(3.5\ \text{cm}\). Each tangent measures approximately \(7.2\ \text{cm}\).

📖 Constructing Tangents to a Circle from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A key property is that the tangent at any point on a circle is perpendicular to the radius drawn to that point of contact. From any external point, exactly two tangents can be drawn to a circle, and they are equal in length. To construct these tangents geometrically, we use the fact that the angle between the tangent and the radius at the point of contact is \(90^\circ\). If we draw a circle whose diameter is the line segment joining the centre \(P\) and the external point \(Q\), then any point on this new circle sees \(PQ\) at a right angle (angle in a semicircle is \(90^\circ\)). The points where this new circle intersects the original circle are exactly the points of contact of the tangents from \(Q\).

Formula Used

Length of tangent from external point: \[ QA = \sqrt{PQ^2 - r^2} = \sqrt{8^2 - 3.5^2} = \sqrt{64 - 12.25} = \sqrt{51.75} \approx 7.19\ \text{cm} \]

Solution

  1. Step 1: Draw a circle with centre \(P\) and radius \(3.5\ \text{cm}\) using a compass.
  2. Step 2: Mark a point \(Q\) outside the circle such that \(PQ = 8\ \text{cm}\). Join \(P\) and \(Q\) with a straight line.
  3. Step 3: Find the midpoint \(M\) of segment \(PQ\) by drawing its perpendicular bisector. Since \(PQ = 8\ \text{cm}\), we get \(PM = MQ = 4\ \text{cm}\).
  4. Step 4: With \(M\) as centre and radius \(MP = MQ = 4\ \text{cm}\), draw another circle. This circle passes through both \(P\) and \(Q\), so \(PQ\) is its diameter.
  5. Step 5: The second circle will intersect the original circle at two points. Name these points of intersection as \(A\) and \(B\). These are the points of contact of the required tangents.
  6. Step 6: Join \(Q\) to \(A\) and \(Q\) to \(B\). The lines \(QA\) and \(QB\) are the required tangents to the original circle from the external point \(Q\).
  7. Step 7: Reason why this works: Since \(PQ\) is the diameter of the second circle, \(\angle PAQ = \angle PBQ = 90^\circ\) (angle in a semicircle). So \(QA \perp PA\) and \(QB \perp PB\), meaning \(QA\) and \(QB\) are perpendicular to the radii at the points of contact, confirming they are tangents.
  8. Step 8: Measure \(QA\) and \(QB\) with a ruler. Both should measure approximately \(7.2\ \text{cm}\), which matches the calculated value \[ QA = \sqrt{PQ^2 - PA^2} = \sqrt{64 - 12.25} \approx 7.19\ \text{cm} \]

Final Answer

Tangents \(QA\) and \(QB\) are successfully constructed from point \(Q\) to the circle with centre \(P\) and radius \(3.5\ \text{cm}\). Each tangent measures approximately \(7.2\ \text{cm}\).

Common Mistake

A common mistake is to take the midpoint of \(PQ\) incorrectly or to draw the second circle with the wrong radius. Remember, the second circle must have \(PQ\) as its diameter, so its radius must be exactly half of \(PQ\), i.e. \(4\ \text{cm}\), not the full \(8\ \text{cm}\).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \(P\) and radius \(3.5\ \text{cm}\) using a compass. — Reason: This is the given circle to which we need to draw tangents from the external point.
  2. Step 2: Mark an external point \(Q\) such that the distance \(PQ = 8\ \text{cm}\), then join \(P\) and \(Q\) with a straight line. — Reason: The problem specifies the distance from the external point to the centre, and connecting them forms the base line for our construction.
  3. Step 3: Construct the perpendicular bisector of segment \(PQ\) to locate its midpoint \(M\). Since \(PQ = 8\ \text{cm}\), we get \(PM = MQ = 4\ \text{cm}\). — Reason: Finding the midpoint allows us to draw an auxiliary circle whose diameter is \(PQ\); any point on this circle will subtend a right angle at \(PQ\).
  4. Step 4: With \(M\) as centre and radius \(MQ = MP = 4\ \text{cm}\), draw a second (auxiliary) circle. — Reason: By the theorem that an angle in a semicircle is \(90^\circ\), every point on this auxiliary circle sees \(PQ\) at a right angle, which is precisely the condition needed for a tangent.
  5. Step 5: Label the two points where the auxiliary circle intersects the original circle as \(A\) and \(B\). Draw line segments \(QA\) and \(QB\). — Reason: At each intersection point, \(\angle PAQ = \angle PBQ = 90^\circ\), confirming that \(QA\) and \(QB\) are tangents to the original circle.
  6. Step 6: Verify the tangent length using the formula. Substituting \(PQ = 8\ \text{cm}\) and \(r = 3.5\ \text{cm}\): \[QA = \sqrt{PQ^2 - r^2} = \sqrt{8^2 - 3.5^2} = \sqrt{64 - 12.25} = \sqrt{51.75} \approx 7.19\ \text{cm}\] — Reason: The Pythagoras theorem applied to right triangle \(PAQ\) confirms the measured length of each tangent, rounded to \(7.2\ \text{cm}\).

Final Answer

Tangents \(QA\) and \(QB\) are successfully constructed from point \(Q\) to the circle with centre \(P\) and radius \(3.5\ \text{cm}\). Each tangent measures approximately \(7.2\ \text{cm}\).

Common Mistake

One common mistake: Using the full length \(PQ\) as the radius of the auxiliary circle instead of half of it (i.e., \(MQ = 4\ \text{cm}\)); the auxiliary circle must have \(PQ\) as its diameter, not its radius, so the correct radius is \(4\ \text{cm}\).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: circle with centre \(P\), radius \(r = 3.5\ \text{cm}\), external point \(Q\) with \(PQ = 8\ \text{cm}\).
  2. Step 2: Construction: bisect \(PQ\) to get midpoint \(M\) with \(PM = MQ = 4\ \text{cm}\); draw circle with centre \(M\) and radius \(4\ \text{cm}\); mark intersections \(A\) and \(B\) with the original circle; join \(QA\) and \(QB\).
  3. Step 3: Length of each tangent: \[QA = \sqrt{8^2 - 3.5^2} = \sqrt{64 - 12.25} = \sqrt{51.75} \approx 7.2\ \text{cm}\]

Answer: Tangents \(QA\) and \(QB\) are successfully constructed from point \(Q\) to the circle with centre \(P\) and radius \(3.5\ \text{cm}\). Each tangent measures approximately \(7.2\ \text{cm}\).

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre A and radius \( 4\ \text{cm} \). Take a point B at a distance of \( 10\ \text{cm} \) from the centre A. Construct the two tangents to the circle from point B and find the length of each tangent.

Solution: Step 1: Draw a circle with centre A and radius \( r = 4\ \text{cm} \). \nStep 2: Mark point B such that \( AB = 10\ \text{cm} \). \nStep 3: Find the midpoint M of segment AB. Since \( AB = 10\ \text{cm} \), we have \( AM = MB = 5\ \text{cm} \). \nStep 4: Draw a circle with centre M and radius \( 5\ \text{cm} \) (i.e., with AB as diameter). \nStep 5: Let the two circles intersect at points T1 and T2. Join B to T1 and B to T2. These are the required tangents. \nVerification: By the tangent–radius property, \( \angle AT_1B = 90^\circ \). Using the Pythagoras theorem in triangle \( AT_1B \): \[ BT_1 = \sqrt{AB^2 - AT_1^2} \] \[ BT_1 = \sqrt{10^2 - 4^2} \] \[ BT_1 = \sqrt{100 - 16} \] \[ BT_1 = \sqrt{84} \] \[ BT_1 = 2\sqrt{21} \approx 9.17\ \text{cm} \]

Answer: Each tangent has length \( 2\sqrt{21} \approx 9.17\ \text{cm} \).

Example 2

Question: Draw a circle with centre O and radius \( 3\ \text{cm} \). Take a point C at a distance of \( 7\ \text{cm} \) from O. Construct the two tangents from C to the circle and measure their lengths.

Solution: Step 1: Draw a circle with centre O and radius \( r = 3\ \text{cm} \). \nStep 2: Mark point C such that \( OC = 7\ \text{cm} \). \nStep 3: Find the midpoint M of segment OC. Since \( OC = 7\ \text{cm} \), we have \( OM = MC = 3.5\ \text{cm} \). \nStep 4: Draw a circle with centre M and radius \( 3.5\ \text{cm} \) (diameter OC). \nStep 5: Let the two circles intersect at points T1 and T2. Join C to T1 and C to T2. These are the required tangents. \nVerification: By the tangent–radius property, \( \angle OT_1C = 90^\circ \). Using the Pythagoras theorem in triangle \( OT_1C \): \[ CT_1 = \sqrt{OC^2 - OT_1^2} \] \[ CT_1 = \sqrt{7^2 - 3^2} \] \[ CT_1 = \sqrt{49 - 9} \] \[ CT_1 = \sqrt{40} \] \[ CT_1 = 2\sqrt{10} \approx 6.32\ \text{cm} \]

Answer: Each tangent has length \( 2\sqrt{10} \approx 6.32\ \text{cm} \).

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \(O\) and radius \(4\ \text{cm}\). Take a point \(T\) at a distance of \(9\ \text{cm}\) from the centre \(O\). Construct the two tangents from point \(T\) to the circle and measure their lengths.

Solution

  1. Step 1: Draw the given circle: Draw a circle with centre \(O\) and radius \(r = 4\ \text{cm}\) using a compass.
  2. Step 2: Mark the external point: Mark a point \(T\) on the paper such that \(OT = 9\ \text{cm}\). Since \(9 > 4\), the point \(T\) lies outside the circle.
  3. Step 3: Find the midpoint of OT: Draw the segment \(OT\). Bisect \(OT\) by constructing a perpendicular bisector. Let the midpoint be \(M\). Then \(OM = MT = \dfrac{9}{2} = 4.5\ \text{cm}\).
  4. Step 4: Draw the auxiliary circle: With \(M\) as centre and radius \(MT = 4.5\ \text{cm}\), draw an auxiliary (helper) circle. By Thales' theorem, any point on this circle sees \(OT\) at a right angle.
  5. Step 5: Mark the points of tangency: Let the auxiliary circle intersect the original circle (centre \(O\), radius \(4\ \text{cm}\)) at points \(A\) and \(B\). These are the points of tangency.
  6. Step 6: Draw the tangents: Join \(TA\) and \(TB\). These two line segments are the required tangents from \(T\) to the circle.
  7. Step 7: Verify using the tangent-length formula: Using the formula \(\ell = \sqrt{d^2 - r^2}\), substitute \(d = 9\ \text{cm}\) and \(r = 4\ \text{cm}\):
  8. Step 8: Calculate the tangent length: \[ \ell = \sqrt{9^2 - 4^2} = \sqrt{81 - 16} = \sqrt{65} \approx 8.06\ \text{cm} \] So each tangent \(TA\) and \(TB\) is approximately \(8.1\ \text{cm}\) long. Verify by measuring \(TA\) and \(TB\) in your construction — they should each be close to \(8.1\ \text{cm}\).

Answer: Tangents \(TA\) and \(TB\) are successfully constructed from the external point \(T\) to the circle with centre \(O\) and radius \(4\ \text{cm}\). Each tangent measures \(\sqrt{65} \approx 8.1\ \text{cm}\).

Everything you get with Solver7

More questions in Geometric Contructions