SOLVER7 Study. Nothing Else.
2018 Board Paper Q2

\(\Delta SHR\sim \Delta SVU.\) in \(\Delta SHR,\) \(SH = 4.5\ cm,\ HR = 5.2\ cm,\ SR = 5.8\ cm\) and \(\dfrac{SH}{SV}=\dfrac{3}{5}.\) Construct \(\Delta SVU.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you draw a small triangle on paper, then use a photocopier to make it bigger. That is exactly what is happening here. We start with a small triangle called \(\Delta SHR\). We want a bigger copy called \(\Delta SVU\). The bigger triangle has sides that are \(\dfrac{5}{3}\) times longer than the small one. So \(SV\) grows from \(4.5\ cm\) to \(7.5\ cm\), and the other sides grow the same way. A ray from point \(S\) with equal markings helps us find the new, bigger corners.

Answer: The required triangle \(\Delta SVU\) is constructed with \(SV = 7.5\ cm\), \(VU \approx 8.67\ cm\), and \(SU \approx 9.67\ cm\), similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

📖 Construction of Similar Triangle SVU (Scale Factor 5/3)

Detailed Explanation

When two triangles are similar, their corresponding sides are in the same ratio. Here \(\Delta SHR \sim \Delta SVU\) means the vertices correspond as \(S \leftrightarrow S,\ H \leftrightarrow V,\ R \leftrightarrow U\). The ratio \(\dfrac{SH}{SV}=\dfrac{3}{5}\) tells us that every side of \(\Delta SVU\) is \(\dfrac{5}{3}\) times the corresponding side of \(\Delta SHR\). So \(\Delta SVU\) is a scaled-up (bigger) copy of \(\Delta SHR\). To construct it, we first draw \(\Delta SHR\) using the given measurements, and then use a ray making an acute angle at \(S\) with 5 equal divisions to locate the enlarged points \(V\) and \(U\).

Formula Used

If \(\Delta SHR \sim \Delta SVU\) with \(\dfrac{SH}{SV}=\dfrac{3}{5}\), then \[\dfrac{SH}{SV}=\dfrac{HR}{VU}=\dfrac{SR}{SU}=\dfrac{3}{5}\]

Solution

  1. Step 1: Identify the scale factor. Since \(\dfrac{SH}{SV}=\dfrac{3}{5}\), the new triangle \(\Delta SVU\) is larger than \(\Delta SHR\). The scale factor is \(\dfrac{5}{3}\), meaning each side of \(\Delta SVU\) is \(\dfrac{5}{3}\) times the corresponding side of \(\Delta SHR\).
  2. Step 2: Construct \(\Delta SHR\) first. Draw segment \(SR = 5.8\ cm\). With centre \(S\) and radius \(4.5\ cm\), draw an arc. With centre \(R\) and radius \(5.2\ cm\), draw another arc cutting the first arc at point \(H\). Join \(SH\) and \(HR\). Triangle \(SHR\) is ready.
  3. Step 3: From vertex \(S\), draw a ray \(SX\) making an acute angle with \(SR\), on the side opposite to \(H\) (or on any convenient side).
  4. Step 4: On ray \(SX\), mark 5 points \(S_1, S_2, S_3, S_4, S_5\) such that \(SS_1 = S_1S_2 = S_2S_3 = S_3S_4 = S_4S_5\). We take 5 points because the denominator of the scale factor \(\dfrac{5}{3}\) is 5 (we take the greater of 3 and 5).
  5. Step 5: Join \(S_3\) to \(R\) (the 3rd point, corresponding to the smaller number 3). Then, through \(S_5\), draw a line parallel to \(S_3R\), meeting the extension of \(SR\) at point \(U\). Now \(SU = \dfrac{5}{3}\times SR\).
  6. Step 6: Through \(U\), draw a line parallel to \(RH\) meeting the extension of \(SH\) at point \(V\). Then \(\Delta SVU\) is the required triangle similar to \(\Delta SHR\).
  7. Step 7: Verification of sides: \[SV = \dfrac{5}{3}\times 4.5 = 7.5\ cm\] \[VU = \dfrac{5}{3}\times 5.2 \approx 8.67\ cm\] \[SU = \dfrac{5}{3}\times 5.8 \approx 9.67\ cm\] These match the sides you should get by measuring the constructed triangle.

Final Answer

The required triangle \(\Delta SVU\) is constructed with \(SV = 7.5\ cm\), \(VU \approx 8.67\ cm\), and \(SU \approx 9.67\ cm\), similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

Common Mistake

A common mistake is to mark only 3 points on ray \(SX\) (using the numerator) instead of 5 (the greater of the two numbers). Always mark the number of points equal to the larger of the two integers in the ratio, and then join the point corresponding to the smaller number to the vertex of the base.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the correspondence and scale factor. The similarity \(\Delta SHR \sim \Delta SVU\) tells us the vertices match as \(S \leftrightarrow S\), \(H \leftrightarrow V\), \(R \leftrightarrow U\). Since \(\dfrac{SH}{SV} = \dfrac{3}{5}\), the scale factor from \(\Delta SHR\) to \(\Delta SVU\) is \(\dfrac{5}{3}\). — Reason: Knowing the scale factor tells us whether the new triangle is bigger or smaller; here \(\dfrac{5}{3} > 1\) confirms \(\Delta SVU\) is larger than \(\Delta SHR\).
  2. Step 2: Construct the original triangle \(\Delta SHR\). Draw base \(SR = 5.8\) cm. With centre \(S\) and radius \(4.5\) cm, draw one arc. With centre \(R\) and radius \(5.2\) cm, draw a second arc that cuts the first arc; label the intersection \(H\). Join \(SH\) and \(HR\). — Reason: The enlarged triangle is built using \(\Delta SHR\) as the reference, so we need it drawn accurately first.
  3. Step 3: Draw a construction ray from \(S\). From vertex \(S\), draw a ray \(SX\) at a convenient acute angle with side \(SR\). — Reason: This ray will be divided into equal parts so we can locate the enlarged vertices using proportional division.
  4. Step 4: Mark 5 equal divisions on ray \(SX\). Starting from \(S\), mark points \(A_1, A_2, A_3, A_4, A_5\) at equal intervals along \(SX\), so that \(SA_5\) has 5 equal parts. — Reason: We need 5 equal parts because the denominator in the scale factor \(\dfrac{5}{3}\) is 5; the 5th division will help us set the full scaled length.
  5. Step 5: Locate the enlarged point \(V\) on line \(SH\). Join \(A_3\) to \(H\). Draw a line through \(A_5\) parallel to \(A_3 H\), and let it meet the extension of \(SH\) at \(V\). Then \(SV = \dfrac{5}{3} \times SH = \dfrac{5}{3} \times 4.5 = 7.5\) cm. — Reason: The parallel line through \(A_5\) divides \(SH\) extended in the ratio \(5 : 3\) by the Basic Proportionality Theorem, giving the required enlarged length.
  6. Step 6: Locate the enlarged point \(U\) on line \(SR\). In the same way, draw a line through \(A_5\) parallel to the line joining \(A_3\) to \(R\), and let it meet the extension of \(SR\) at \(U\). Then \(SU = \dfrac{5}{3} \times SR = \dfrac{5}{3} \times 5.8 \approx 9.67\) cm. — Reason: Applying the same proportional construction to side \(SR\) gives the corresponding enlarged side \(SU\).
  7. Step 7: Complete triangle \(\Delta SVU\) and verify. Join \(V\) to \(U\). The length \(VU = \dfrac{5}{3} \times HR = \dfrac{5}{3} \times 5.2 \approx 8.67\) cm. Check that the three sides satisfy \[\dfrac{SH}{SV} = \dfrac{HR}{VU} = \dfrac{SR}{SU} = \dfrac{3}{5}\] — Reason: Joining the two new vertices completes the similar triangle, and verifying the ratios confirms the construction is correct.

Final Answer

The required triangle \(\Delta SVU\) is constructed with \(SV = 7.5\ cm\), \(VU \approx 8.67\ cm\), and \(SU \approx 9.67\ cm\), similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

Common Mistake

One common mistake: Students often draw only 3 equal divisions on the construction ray (matching the numerator 3) instead of 5 equal divisions (matching the denominator 5), which gives the wrong enlarged lengths.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Scale factor: \(\dfrac{SH}{SV} = \dfrac{3}{5}\), so each side of \(\Delta SVU\) is \(\dfrac{5}{3}\) times the corresponding side of \(\Delta SHR\).
  2. Step 2: Construct \(\Delta SHR\): draw \(SR = 5.8\ cm\); arc of radius \(4.5\ cm\) from \(S\) and arc of radius \(5.2\ cm\) from \(R\) intersect at \(H\); join \(SH\) and \(HR\).
  3. Step 3: From \(S\), draw ray \(SX\) at an acute angle to \(SR\); mark 5 equal divisions on \(SX\); use the 3rd and 5th division points to locate \(V\) and \(U\) via parallel lines to \(H\) and \(R\) respectively.
  4. Step 4: Computed sides: \(SV = \dfrac{5}{3} \times 4.5 = 7.5\ cm\), \(VU = \dfrac{5}{3} \times 5.2 \approx 8.67\ cm\), \(SU = \dfrac{5}{3} \times 5.8 \approx 9.67\ cm\).

Answer: The required triangle \(\Delta SVU\) is constructed with \(SV = 7.5\ cm\), \(VU \approx 8.67\ cm\), and \(SU \approx 9.67\ cm\), similar to \(\Delta SHR\) with scale factor \(\dfrac{5}{3}\).

➕ More Examples

More Examples

Example 1

Question: \( \Delta ABC \sim \Delta PQR \). In \( \Delta ABC \), \( AB = 3.6 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm and \( \dfrac{AB}{PQ} = \dfrac{2}{3} \). Find the sides of \( \Delta PQR \) and construct it.

Solution: Step 1: Identify corresponding sides. Since \( \Delta ABC \sim \Delta PQR \), we have \[ \frac{AB}{PQ} = \frac{BC}{QR} = \frac{AC}{PR} \] Step 2: The given ratio is \( \dfrac{AB}{PQ} = \dfrac{2}{3} \), so the scale factor from \( \Delta ABC \) to \( \Delta PQR \) is \( k = \dfrac{3}{2} \). Step 3: Find each side of \( \Delta PQR \). \[ PQ = AB \times \frac{3}{2} = 3.6 \times 1.5 = 5.4 \text{ cm} \] \[ QR = BC \times \frac{3}{2} = 4.8 \times 1.5 = 7.2 \text{ cm} \] \[ PR = AC \times \frac{3}{2} = 5.4 \times 1.5 = 8.1 \text{ cm} \] Step 4: Construction of \( \Delta PQR \): Draw segment \( QR = 7.2 \) cm. With \( Q \) as centre, draw an arc of radius \( PQ = 5.4 \) cm. With \( R \) as centre, draw an arc of radius \( PR = 8.1 \) cm. Mark their intersection as \( P \). Join \( PQ \) and \( PR \). \( \Delta PQR \) is the required triangle.

Answer: \( PQ = 5.4 \) cm, \( QR = 7.2 \) cm, \( PR = 8.1 \) cm

Example 2

Question: \( \Delta LMN \sim \Delta XYZ \). In \( \Delta LMN \), \( LM = 6.0 \) cm, \( MN = 7.5 \) cm, \( LN = 9.0 \) cm and \( \dfrac{LM}{XY} = \dfrac{4}{3} \). Find the sides of \( \Delta XYZ \) and construct it.

Solution: Step 1: Identify corresponding sides. Since \( \Delta LMN \sim \Delta XYZ \), we have \[ \frac{LM}{XY} = \frac{MN}{YZ} = \frac{LN}{XZ} \] Step 2: The given ratio is \( \dfrac{LM}{XY} = \dfrac{4}{3} \), so the scale factor from \( \Delta LMN \) to \( \Delta XYZ \) is \( k = \dfrac{3}{4} \). Step 3: Find each side of \( \Delta XYZ \). \[ XY = LM \times \frac{3}{4} = 6.0 \times 0.75 = 4.5 \text{ cm} \] \[ YZ = MN \times \frac{3}{4} = 7.5 \times 0.75 = 5.625 \approx 5.6 \text{ cm} \] \[ XZ = LN \times \frac{3}{4} = 9.0 \times 0.75 = 6.75 \text{ cm} \] Step 4: Construction of \( \Delta XYZ \): Draw segment \( YZ = 5.6 \) cm. With \( Y \) as centre, draw an arc of radius \( XY = 4.5 \) cm. With \( Z \) as centre, draw an arc of radius \( XZ = 6.75 \) cm. Mark their intersection as \( X \). Join \( XY \) and \( XZ \). \( \Delta XYZ \) is the required triangle.

Answer: \( XY = 4.5 \) cm, \( YZ = 5.6 \) cm, \( XZ = 6.75 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: \( \Delta ABC \sim \Delta ADE \). In \( \Delta ABC \), \( AB = 3.6 \ cm \), \( BC = 4.8 \ cm \), \( AC = 5.4 \ cm \) and \( \dfrac{AB}{AD} = \dfrac{2}{3} \). Construct \( \Delta ADE \).

Solution

  1. Step 1: Understand the similarity and scale factor: We are given \( \Delta ABC \sim \Delta ADE \) with \( \dfrac{AB}{AD} = \dfrac{2}{3} \). This means every side of \( \Delta ADE \) is \( \dfrac{3}{2} \) times the corresponding side of \( \Delta ABC \). The scale factor from \( \Delta ABC \) to \( \Delta ADE \) is \( k = \dfrac{3}{2} \).
  2. Step 2: Find side AD: Using the ratio \( \dfrac{AB}{AD} = \dfrac{2}{3} \), we get \[ AD = AB \times \frac{3}{2} = 3.6 \times \frac{3}{2} = 5.4 \ cm \]
  3. Step 3: Find side DE: Side \( DE \) corresponds to \( BC \). So, \[ DE = BC \times \frac{3}{2} = 4.8 \times \frac{3}{2} = 7.2 \ cm \]
  4. Step 4: Find side AE: Side \( AE \) corresponds to \( AC \). So, \[ AE = AC \times \frac{3}{2} = 5.4 \times \frac{3}{2} = 8.1 \ cm \]
  5. Step 5: Construct triangle ADE: Using the computed sides \( AD = 5.4 \ cm \), \( DE = 7.2 \ cm \), and \( AE = 8.1 \ cm \), construct \( \Delta ADE \) as follows: Draw segment \( AD = 5.4 \ cm \). With \( A \) as centre, draw an arc of radius \( 8.1 \ cm \). With \( D \) as centre, draw an arc of radius \( 7.2 \ cm \). Mark their intersection as \( E \). Join \( AE \) and \( DE \) to complete \( \Delta ADE \).
  6. Step 6: Verify similarity: Check that \[ \frac{AD}{AB} = \frac{5.4}{3.6} = \frac{3}{2}, \quad \frac{DE}{BC} = \frac{7.2}{4.8} = \frac{3}{2}, \quad \frac{AE}{AC} = \frac{8.1}{5.4} = \frac{3}{2} \] All ratios are equal, confirming \( \Delta ADE \sim \Delta ABC \) with scale factor \( \dfrac{3}{2} \).

Answer: The required triangle \( \Delta ADE \) is constructed with \( AD = 5.4 \ cm \), \( DE = 7.2 \ cm \), and \( AE = 8.1 \ cm \), similar to \( \Delta ABC \) with scale factor \( \dfrac{3}{2} \).

Everything you get with Solver7

More questions in Geometric Contructions