SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q4

Draw a circle of radius \(3.3\ cm\) Draw a chord \(PQ\) of length \(6.6\ cm.\) Draw tangents to the circle at points \(P\) and \(Q.\) Write your observation about the tangents.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle like a round clock face. A tangent is a straight line that just touches the edge of the clock at one point, without going inside. Now, a diameter goes all the way across the middle of the clock. Here, the chord \(PQ\) measures \(6.6 \text{ cm}\), which equals two times the radius \(3.3 \text{ cm}\). So \(PQ\) is actually a diameter! Tangents at both ends of a diameter always stand perfectly straight up, pointing the same direction, making them parallel to each other.

Answer: Observation: The tangents drawn at \(P\) and \(Q\) are parallel to each other. This is because \(PQ = 6.6\ cm = 2 \times 3.3\ cm\) is a diameter, and both tangents are perpendicular to this diameter.

📖 Constructing Tangents at the Endpoints of a Chord

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property is: the tangent at any point of a circle is perpendicular to the radius drawn to that point. In this problem, the chord \(PQ\) has length \(6.6\ cm\), which is exactly twice the radius \(3.3\ cm\). This means \(PQ\) is actually a diameter of the circle, and it passes through the centre \(O\). Since both tangents at \(P\) and \(Q\) must be perpendicular to the same line \(PQ\) (the diameter through the centre), these two tangents will be parallel to each other.

Formula Used

Tangent at a point is perpendicular to the radius at that point: \(OP \perp \text{tangent at } P\) and \(OQ \perp \text{tangent at } Q\).

Solution

  1. Step 1: Mark a point \(O\) on the paper as the centre. Using a compass with radius \(3.3\ cm\), draw a circle.
  2. Step 2: On this circle, we need a chord \(PQ\) of length \(6.6\ cm\). Notice that \(6.6 = 2 \times 3.3\), so the chord length equals the diameter. Hence any such chord must pass through the centre \(O\).
  3. Step 3: Draw a straight line through \(O\). Let it cut the circle at two points; label them \(P\) and \(Q\). Then \(PQ = 6.6\ cm\) is the required chord (which is actually a diameter).
  4. Step 4: To draw the tangent at \(P\), use the property that the tangent is perpendicular to the radius \(OP\). At point \(P\), construct a line perpendicular to \(OP\) using a compass and ruler (or a set-square). Call this line \(l_1\). This is the tangent at \(P\).
  5. Step 5: Similarly, at point \(Q\), construct a line perpendicular to the radius \(OQ\). Call this line \(l_2\). This is the tangent at \(Q\).
  6. Step 6: Observe the two tangents \(l_1\) and \(l_2\). Both are perpendicular to the same straight line \(PQ\). Two lines perpendicular to the same line are parallel to each other.

Final Answer

Observation: The tangents drawn at \(P\) and \(Q\) are parallel to each other. This is because \(PQ = 6.6\ cm = 2 \times 3.3\ cm\) is a diameter, and both tangents are perpendicular to this diameter.

Common Mistake

A common mistake is to treat \(PQ\) as an ordinary chord and not notice that its length equals the diameter. Students then try to place \(P\) and \(Q\) anywhere on the circle, which makes the chord shorter than \(6.6\ cm\) and leads to tangents that meet at a point instead of being parallel.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Mark a point \(O\) on paper as the centre of the circle. Set your compass to a radius of \(3.3\ cm\) and draw the circle. — Reason: The problem states the radius is \(3.3\ cm\), so this is the circle on which all constructions will be based.
  2. Step 2: Check whether the required chord \(PQ = 6.6\ cm\) is an ordinary chord or a diameter by comparing it with the diameter: \[2 \times 3.3 = 6.6\ cm\] Since the chord length equals the diameter, \(PQ\) must pass through the centre \(O\). — Reason: A chord equal in length to the diameter can only be the diameter itself.
  3. Step 3: Draw a straight line through \(O\) so that it cuts the circle at two points. Label these intersection points \(P\) and \(Q\). Verify that \(PQ = 6.6\ cm\). — Reason: Any line through the centre intersects the circle at two diametrically opposite points, giving us the required chord of length \(6.6\ cm\).
  4. Step 4: At point \(P\), construct a line perpendicular to the radius \(OP\) using a set-square or compass-and-ruler method. This perpendicular line is the tangent at \(P\). — Reason: By the tangent-radius property, the tangent at any point must be perpendicular to the radius at that point, so the tangent at \(P\) is perpendicular to \(OP\).
  5. Step 5: At point \(Q\), repeat the same construction: draw a line perpendicular to the radius \(OQ\). This perpendicular line is the tangent at \(Q\). — Reason: The same tangent-radius property applies at \(Q\), so the tangent at \(Q\) is perpendicular to \(OQ\).
  6. Step 6: Observe that both tangents are perpendicular to the same straight line \(PQ\) (the diameter). Since \(\text{tangent at } P \perp PQ\) and \(\text{tangent at } Q \perp PQ\), both tangents are perpendicular to the very same line. — Reason: Two lines that are each perpendicular to the same line are necessarily parallel to each other, confirming the final observation.

Final Answer

Observation: The tangents drawn at \(P\) and \(Q\) are parallel to each other. This is because \(PQ = 6.6\ cm = 2 \times 3.3\ cm\) is a diameter, and both tangents are perpendicular to this diameter.

Common Mistake

One common mistake: Students assume the chord \(PQ = 6.6\ cm\) is just an ordinary chord and try to locate \(P\) and \(Q\) somewhere on the circle without checking whether the chord length equals the diameter — missing the key insight that \(6.6 = 2 \times 3.3\) means \(PQ\) is actually a diameter passing through centre \(O\).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw circle with centre \(O\) and radius \(r = 3.3\ cm\).
  2. Step 2: Check chord length: \(PQ = 6.6\ cm = 2 \times 3.3\ cm = 2r\), so \(PQ\) is a diameter passing through \(O\).
  3. Step 3: Draw diameter \(PQ\) through \(O\); at \(P\) construct tangent \(\perp OP\), and at \(Q\) construct tangent \(\perp OQ\).
  4. Step 4: Both tangents are perpendicular to the same line \(PQ\), hence the two tangents are parallel.

Answer: Observation: The tangents drawn at \(P\) and \(Q\) are parallel to each other. This is because \(PQ = 6.6\ cm = 2 \times 3.3\ cm\) is a diameter, and both tangents are perpendicular to this diameter.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 4\ \text{cm} \). Draw a chord \( AB \) of length \( 8\ \text{cm} \). Construct tangents to the circle at points \( A \) and \( B \). Write your observation about the two tangents.

Solution: Step 1 — Draw the circle. Draw a circle with centre \( O \) and radius \( r = 4\ \text{cm} \). \nStep 2 — Draw chord AB. The diameter of the circle is \[ d = 2r = 2 \times 4 = 8\ \text{cm} \] Since the chord \( AB = 8\ \text{cm} \) equals the diameter, the chord is itself a diameter and passes through the centre \( O \). \nStep 3 — Draw radii OA and OB. Since \( AB \) is a diameter, \( OA \) and \( OB \) lie along the same straight line but point in opposite directions. \nStep 4 — Construct the tangents. At point \( A \), draw a line perpendicular to \( OA \). At point \( B \), draw a line perpendicular to \( OB \). Each tangent makes a \( 90^\circ \) angle with the radius at the point of contact. \nStep 5 — Observation. Because \( OA \) and \( OB \) are collinear (both along the diameter), and both tangents are perpendicular to this same line, the tangent at \( A \) and the tangent at \( B \) are parallel to each other.

Answer: The two tangents drawn at the endpoints A and B of the diameter are parallel to each other.

Example 2

Question: Draw a circle of radius \( 2.5\ \text{cm} \). Draw a chord \( XY \) of length \( 5\ \text{cm} \). Construct tangents to the circle at points \( X \) and \( Y \). Write your observation about the two tangents.

Solution: Step 1 — Draw the circle. Draw a circle with centre \( O \) and radius \( r = 2.5\ \text{cm} \). \nStep 2 — Draw chord XY. The diameter of the circle is \[ d = 2r = 2 \times 2.5 = 5\ \text{cm} \] Since the chord \( XY = 5\ \text{cm} \) equals the diameter, \( XY \) is a diameter and passes through the centre \( O \). \nStep 3 — Draw radii OX and OY. The radii \( OX \) and \( OY \) are collinear, forming the diameter, and point in opposite directions. \nStep 4 — Construct the tangents. At \( X \), erect a perpendicular to \( OX \); this is the tangent at \( X \). At \( Y \), erect a perpendicular to \( OY \); this is the tangent at \( Y \). Each tangent makes an angle of \( 90^\circ \) with the respective radius. \nStep 5 — Observation. Both tangents are perpendicular to the same line \( XY \) (the diameter). Two lines each perpendicular to the same line are parallel to each other. Hence, the tangent at \( X \) is parallel to the tangent at \( Y \).

Answer: The two tangents drawn at the endpoints X and Y of the diameter are parallel to each other.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius \( 4\ \text{cm} \). Draw a chord \( AB \) of length \( 4\ \text{cm} \) (equal to the radius). Draw tangents to the circle at points \( A \) and \( B \). Measure and write your observation about the angle between the two tangents.

Solution

  1. Step 1: Construct the circle and chord: Draw a circle with centre \( O \) and radius \( r = 4\ \text{cm} \). Mark a chord \( AB \) such that \( AB = 4\ \text{cm} \).
  2. Step 2: Identify the triangle formed: Since \( OA = OB = 4\ \text{cm} \) (radii) and \( AB = 4\ \text{cm} \), triangle \( OAB \) is equilateral. Therefore \( \angle AOB = 60^\circ \).
  3. Step 3: Draw the tangents at A and B: At point \( A \), draw a tangent \( TA \) perpendicular to radius \( OA \), so \( \angle OAT = 90^\circ \). Similarly, at point \( B \), draw a tangent \( TB \) perpendicular to radius \( OB \), so \( \angle OBT = 90^\circ \). The two tangents meet at an external point \( T \).
  4. Step 4: Find the angle between the two tangents: In quadrilateral \( OATB \), the sum of all angles is \( 360^\circ \). We have \( \angle OAT = 90^\circ \), \( \angle OBT = 90^\circ \), and \( \angle AOB = 60^\circ \). Therefore, \( \angle ATB = 360^\circ - 90^\circ - 90^\circ - 60^\circ = 120^\circ \).
  5. Step 5: Observation: Since \( AB = 4\ \text{cm} \ne 2 \times 4\ \text{cm} = 8\ \text{cm} \), the chord \( AB \) is NOT a diameter. Hence the two tangents are NOT parallel; they meet at an external point \( T \) at an angle of \( 120^\circ \).

Answer: The two tangents drawn at \( A \) and \( B \) are NOT parallel. They meet at an external point \( T \) and the angle between them is \( \angle ATB = 120^\circ \). This is because chord \( AB = 4\ \text{cm} \) is not a diameter of the circle (diameter \( = 8\ \text{cm} \)), so the radii \( OA \) and \( OB \) are not collinear, and the perpendicular tangents at \( A \) and \( B \) are not parallel.

Everything you get with Solver7

More questions in Geometric Contructions