\(\Delta PQR\sim \Delta LTR.\) In \(\Delta PQR,\ PQ = 4.2\ cm,\ QR = 5.4\ cm,\ PR = 4.8\ cm.\) Construct \(\Delta PQR\) and \(\Delta LTR,\) such that \(\dfrac{PQ}{LT}=\dfrac{3}{4}.\)
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
Imagine you drew a small triangle on paper. Now you want a bigger copy of it, like zooming in on a photo. Every side of the new triangle grows by the same amount. Here, the new triangle has sides that are four-thirds as long as the old one. The small triangle has sides of 4.2 cm, 5.4 cm, and 4.8 cm. The big copy gets sides of 5.6 cm, 7.2 cm, and 6.4 cm. Both triangles keep the same shape, just different sizes.
Answer: \(\Delta LTR\) is constructed similar to \(\Delta PQR\) with sides \(LT=5.6\) cm, \(TR=7.2\) cm, and \(LR=6.4\) cm, satisfying \(\dfrac{PQ}{LT}=\dfrac{3}{4}\).
When two triangles are similar, their corresponding sides are in the same ratio (called the scale factor). Here \(\Delta PQR \sim \Delta LTR\), so corresponding vertices are P-L, Q-T, R-R. Since R is common to both triangles, both triangles share vertex R, and the construction of \(\Delta LTR\) is done on the same base line as QR extended (or on RQ produced). The ratio \(\dfrac{PQ}{LT}=\dfrac{3}{4}\) means \(\Delta LTR\) is larger than \(\Delta PQR\), with each side of \(\Delta LTR\) being \(\dfrac{4}{3}\) times the corresponding side of \(\Delta PQR\). We first construct \(\Delta PQR\) with the given measurements, then use the ray-division method to locate points L and T such that the new triangle has sides in the ratio 4:3 with the original.
If \(\Delta PQR \sim \Delta LTR\) with \(\dfrac{PQ}{LT}=\dfrac{3}{4}\), then \(\dfrac{PQ}{LT}=\dfrac{QR}{TR}=\dfrac{PR}{LR}=\dfrac{3}{4}\). So \(LT=\dfrac{4}{3}\times PQ,\ TR=\dfrac{4}{3}\times QR,\ LR=\dfrac{4}{3}\times PR\).
\(\Delta LTR\) is constructed similar to \(\Delta PQR\) with sides \(LT=5.6\) cm, \(TR=7.2\) cm, and \(LR=6.4\) cm, satisfying \(\dfrac{PQ}{LT}=\dfrac{3}{4}\).
A common mistake is to make \(\Delta LTR\) smaller than \(\Delta PQR\). Since \(\dfrac{PQ}{LT}=\dfrac{3}{4}\) means \(LT>PQ\), the new triangle \(\Delta LTR\) must be LARGER. Students often mark only 3 points on the ray and locate T using the 4th, whereas the correct method is to mark 4 points (the larger of the two numbers) and use point \(R_3\) to draw the parallel line through \(R_4\).
\(\Delta LTR\) is constructed similar to \(\Delta PQR\) with sides \(LT=5.6\) cm, \(TR=7.2\) cm, and \(LR=6.4\) cm, satisfying \(\dfrac{PQ}{LT}=\dfrac{3}{4}\).
One common mistake: Students sometimes use the scale factor the wrong way round — they divide by \(\dfrac{4}{3}\) instead of multiplying, giving sides smaller than those of \(\Delta PQR\). Always check: if the given ratio \(\dfrac{PQ}{LT} = \dfrac{3}{4}\) has the smaller number on top, then \(LT\) must be larger than \(PQ\), so multiply by \(\dfrac{4}{3}\).
Answer: \(\Delta LTR\) is constructed similar to \(\Delta PQR\) with sides \(LT=5.6\) cm, \(TR=7.2\) cm, and \(LR=6.4\) cm, satisfying \(\dfrac{PQ}{LT}=\dfrac{3}{4}\).
Question: \( \triangle ABC \sim \triangle XYZ \). In \( \triangle ABC \), \( AB = 3.6 \) cm, \( BC = 4.8 \) cm, \( AC = 5.4 \) cm. Construct \( \triangle ABC \) and \( \triangle XYZ \) such that \[ \frac{AB}{XY} = \frac{2}{3}. \] Write the steps of construction and find the side lengths of \( \triangle XYZ \).
Solution: We are given \( \triangle ABC \sim \triangle XYZ \) with scale factor \( \frac{AB}{XY} = \frac{2}{3} \), meaning \( \triangle XYZ \) is larger than \( \triangle ABC \). \nThe scale factor from \( \triangle ABC \) to \( \triangle XYZ \) is \( \frac{3}{2} \). \nSide lengths of \( \triangle XYZ \): \nSince \( \frac{AB}{XY} = \frac{2}{3} \), we get \[ XY = \frac{3}{2} \times AB = \frac{3}{2} \times 3.6 = 5.4 \text{ cm}. \] \nSimilarly, \[ YZ = \frac{3}{2} \times BC = \frac{3}{2} \times 4.8 = 7.2 \text{ cm}. \] \nAnd, \[ XZ = \frac{3}{2} \times AC = \frac{3}{2} \times 5.4 = 8.1 \text{ cm}. \] \nSteps of Construction: 1. Draw segment \( BC = 4.8 \) cm. 2. With \( B \) as centre and radius \( 3.6 \) cm, draw an arc. With \( C \) as centre and radius \( 5.4 \) cm, draw another arc. Label the intersection \( A \). \( \triangle ABC \) is now complete. 3. From \( B \), draw a ray \( BX' \) at an acute angle below \( BC \). 4. Mark 3 equal divisions on ray \( BX' \): label them \( B_1, B_2, B_3 \). 5. Join \( B_2 \) to \( C \) (since the original ratio uses 2 parts). 6. Through \( B_3 \), draw a line parallel to \( B_2C \), meeting the extension of \( BC \) at \( Y \). Now \( BY = 7.2 \) cm. 7. Through \( Y \), draw a line parallel to \( CA \), meeting the extension of \( BA \) at \( X \). 8. \( \triangle XYB \) is relabelled \( \triangle XYZ \) (with \( Z \equiv B \) shifted accordingly so \( \triangle XYZ \sim \triangle ABC \)). \nVerification: \[ \frac{AB}{XY} = \frac{3.6}{5.4} = \frac{2}{3} \checkmark \]
Answer: \( XY = 5.4 \) cm, \( YZ = 7.2 \) cm, \( XZ = 8.1 \) cm.
Question: \( \triangle DEF \sim \triangle MNF \). In \( \triangle DEF \), \( DE = 5.6 \) cm, \( EF = 6.0 \) cm, \( DF = 4.4 \) cm. Construct \( \triangle DEF \) and \( \triangle MNF \) such that \[ \frac{DE}{MN} = \frac{5}{3}. \] Write the steps of construction and find the side lengths of \( \triangle MNF \).
Solution: We are given \( \triangle DEF \sim \triangle MNF \) with scale factor \( \frac{DE}{MN} = \frac{5}{3} \), meaning \( \triangle MNF \) is smaller than \( \triangle DEF \). \nThe scale factor from \( \triangle DEF \) to \( \triangle MNF \) is \( \frac{3}{5} \). \nSide lengths of \( \triangle MNF \): \nSince \( \frac{DE}{MN} = \frac{5}{3} \), we get \[ MN = \frac{3}{5} \times DE = \frac{3}{5} \times 5.6 = 3.36 \text{ cm}. \] \nSimilarly, \[ NF = \frac{3}{5} \times EF = \frac{3}{5} \times 6.0 = 3.6 \text{ cm}. \] \nAnd, \[ MF = \frac{3}{5} \times DF = \frac{3}{5} \times 4.4 = 2.64 \text{ cm}. \] \nSteps of Construction: 1. Draw segment \( EF = 6.0 \) cm. 2. With \( E \) as centre and radius \( 5.6 \) cm, draw an arc. With \( F \) as centre and radius \( 4.4 \) cm, draw another arc. Label the intersection \( D \). \( \triangle DEF \) is now complete. 3. From \( F \), draw a ray \( FP \) at an acute angle. 4. Mark 5 equal divisions on ray \( FP \): label them \( F_1, F_2, F_3, F_4, F_5 \). 5. Join \( F_5 \) to \( E \). 6. Through \( F_3 \), draw a line parallel to \( F_5 E \), meeting \( FE \) at \( N \). Now \( FN = 3.6 \) cm. 7. Through \( N \), draw a line parallel to \( ED \), meeting \( FD \) at \( M \). 8. \( \triangle MNF \) is the required triangle similar to \( \triangle DEF \). \nVerification: \[ \frac{DE}{MN} = \frac{5.6}{3.36} = \frac{5}{3} \checkmark \]
Answer: \( MN = 3.36 \) cm, \( NF = 3.6 \) cm, \( MF = 2.64 \) cm.
Question: \(\Delta ABC \sim \Delta PQC.\) In \(\Delta ABC,\) \(AB = 3.6\) cm, \(BC = 4.8\) cm, \(AC = 5.4\) cm. Construct \(\Delta ABC\) and then construct \(\Delta PQC\) such that \(\dfrac{AB}{PQ} = \dfrac{2}{3}.\)
Answer: \(\Delta PQC\) is constructed similar to \(\Delta ABC\) with sides \(PQ = 5.4\) cm, \(QC = 7.2\) cm, and \(PC = 8.1\) cm, satisfying \(\dfrac{AB}{PQ} = \dfrac{2}{3}\).