SOLVER7 Study. Nothing Else.
2026 Board Paper QB (ii)

Draw a circle with centre \(O\) and radius \(3.5\ cm,\) take a point \(P\) at a distance \(5.7\ cm\) from the centre. Draw tangents to the circle from point \(P.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle drawn on paper, like a coin. Now place a dot outside the coin. A tangent is a line that just barely touches the edge of the coin, not crossing inside. From that outside dot, you can draw exactly two such touching lines. Both touching lines are the same length. Here, the circle has a radius of \( 3.5 \) cm and the outside dot is \( 5.7 \) cm away from the centre. Each touching line turns out to be about \( 4.5 \) cm long.

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are drawn from point \( P \) to the circle, each of length approximately \( 4.5\ cm \).

📖 Constructing Tangents from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. A very important property of tangents is that the radius drawn to the point of contact is perpendicular to the tangent. So the angle between the radius and the tangent at the point of contact is \( 90^\circ \). To construct tangents from an external point \( P \) to a circle with centre \( O \), we use this right-angle property. Since \( \angle OTP = 90^\circ \) (where \( T \) is the point of contact), the point \( T \) must lie on a circle whose diameter is \( OP \) (by the angle-in-a-semicircle theorem). Therefore, drawing a circle with \( OP \) as diameter locates the two points of contact, and joining \( P \) to these points gives the required tangents.

Formula Used

Length of tangent from external point: \( PT = \sqrt{OP^2 - r^2} \)

Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( 3.5\ cm \) using a compass.
  2. Step 2: Mark a point \( P \) outside the circle such that \( OP = 5.7\ cm \). Join \( O \) and \( P \) with a straight line.
  3. Step 3: Find the midpoint \( M \) of \( OP \) by constructing the perpendicular bisector of \( OP \). Place the compass at \( O \) with radius more than half of \( OP \), draw arcs on both sides of \( OP \); repeat from \( P \) with the same radius. Join the two intersection points to get the perpendicular bisector, which cuts \( OP \) at \( M \).
  4. Step 4: With \( M \) as centre and radius \( MO = MP = 2.85\ cm \), draw a circle. This new circle will intersect the original circle at two points; call them \( T_1 \) and \( T_2 \).
  5. Step 5: Join \( P \) to \( T_1 \) and \( P \) to \( T_2 \). The line segments \( PT_1 \) and \( PT_2 \) are the required tangents to the circle from point \( P \).
  6. Step 6: Verify by measurement or by calculation using the Pythagoras theorem in triangle \( OT_1P \): \[ PT_1 = \sqrt{OP^2 - OT_1^2} = \sqrt{(5.7)^2 - (3.5)^2} = \sqrt{32.49 - 12.25} = \sqrt{20.24} \approx 4.5\ cm \] Both tangents should be equal in length.

Final Answer

Two tangents \( PT_1 \) and \( PT_2 \) are drawn from point \( P \) to the circle, each of length approximately \( 4.5\ cm \).

Common Mistake

A common mistake is to draw the second circle with \( OP \) as radius instead of as diameter. Remember: the circle used to locate the points of contact must have \( OP \) as its diameter, so its centre is the midpoint \( M \) of \( OP \) and its radius is \( \dfrac{OP}{2} \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( r = 3.5\ cm \) using a compass. — Reason: This is the given circle to which we need to draw tangents from an outside point.
  2. Step 2: Mark a point \( P \) outside the circle so that the distance \( OP = 5.7\ cm \), then draw a straight line joining \( O \) and \( P \). — Reason: Point \( P \) is the external point from which the two tangents will be constructed; the segment \( OP \) will be used to locate the points of contact.
  3. Step 3: Construct the perpendicular bisector of segment \( OP \) to find its midpoint \( M \). Place the compass at \( O \) with a radius greater than half of \( OP \) and draw arcs on both sides of \( OP \); repeat the same from \( P \). Connect the two arc-intersection points; this line cuts \( OP \) at midpoint \( M \), so \( OM = MP = \frac{5.7}{2} = 2.85\ cm \). — Reason: The midpoint is needed because the next circle must have \( OP \) as its diameter, and the centre of that circle is \( M \).
  4. Step 4: With \( M \) as the centre and radius equal to \( MO = MP = 2.85\ cm \), draw a second circle. — Reason: By the angle-in-a-semicircle theorem, any point on a circle with diameter \( OP \) will see \( OP \) at \( 90^\circ \). Since the tangent-radius angle must be \( 90^\circ \), the points of contact \( T_1 \) and \( T_2 \) lie exactly where this new circle intersects the original circle.
  5. Step 5: Label the two points where the new circle intersects the original circle as \( T_1 \) and \( T_2 \). Draw straight lines \( PT_1 \) and \( PT_2 \). — Reason: These two lines are the required tangents; each passes through \( P \) and touches the original circle at exactly one point.
  6. Step 6: Verify the length of each tangent using the formula. Substituting \( OP = 5.7\ cm \) and \( r = 3.5\ cm \): \[ PT = \sqrt{OP^2 - r^2} = \sqrt{(5.7)^2 - (3.5)^2} = \sqrt{32.49 - 12.25} = \sqrt{20.24} \approx 4.5\ cm \] — Reason: Since \( \angle OT_1P = 90^\circ \), triangle \( OT_1P \) is right-angled at \( T_1 \), so Pythagoras' theorem directly gives the tangent length, confirming the construction is accurate.

Final Answer

Two tangents \( PT_1 \) and \( PT_2 \) are drawn from point \( P \) to the circle, each of length approximately \( 4.5\ cm \).

Common Mistake

One common mistake: Students sometimes set the radius of the second circle (drawn with centre \( M \)) to the radius of the original circle \( r = 3.5\ cm \) instead of \( MO = 2.85\ cm \), which means the second circle does not have \( OP \) as its diameter and the construction fails to locate the correct points of tangency.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw circle with centre \( O \), radius \( r = 3.5\ cm \). Mark external point \( P \) with \( OP = 5.7\ cm \).
  2. Step 2: Bisect \( OP \) to get midpoint \( M \). Draw a circle with centre \( M \) and radius \( MO = MP = 2.85\ cm \).
  3. Step 3: Let the new circle intersect the original circle at \( T_1 \) and \( T_2 \). Join \( PT_1 \) and \( PT_2 \).
  4. Step 4: Verify: \( PT = \sqrt{(5.7)^2 - (3.5)^2} = \sqrt{32.49 - 12.25} = \sqrt{20.24} \approx 4.5\ cm \).

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are drawn from point \( P \) to the circle, each of length approximately \( 4.5\ cm \).

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre O and radius \( 4\ \text{cm} \). Take a point P at a distance \( 6.5\ \text{cm} \) from the centre O. Draw tangents to the circle from point P and find the length of each tangent.

Solution: Step 1: Draw a circle with centre O and radius \( r = 4\ \text{cm} \). \nStep 2: Mark point P such that \( OP = 6.5\ \text{cm} \). \nStep 3: Find midpoint M of OP, so \( OM = \frac{6.5}{2} = 3.25\ \text{cm} \). \nStep 4: Draw a circle with centre M and radius \( 3.25\ \text{cm} \). This circle passes through O and P. \nStep 5: Let the two circles intersect at points T1 and T2. Join P to T1 and P to T2. These are the required tangents. \nVerification — since OT1 is a radius and PT1 is tangent, angle OT1P = 90°. Using the Pythagoras theorem in triangle OT1P: \[ PT_1 = \sqrt{OP^2 - OT_1^2} \] \[ PT_1 = \sqrt{(6.5)^2 - (4)^2} \] \[ PT_1 = \sqrt{42.25 - 16} \] \[ PT_1 = \sqrt{26.25} \] \[ PT_1 \approx 5.12\ \text{cm} \]

Answer: Length of each tangent \( \approx 5.12\ \text{cm} \)

Example 2

Question: A circle has its centre at O with radius \( 3\ \text{cm} \). Point Q lies outside the circle such that \( OQ = 7\ \text{cm} \). Construct the two tangents from Q to the circle and calculate the length of each tangent.

Solution: Step 1: Draw a circle with centre O and radius \( r = 3\ \text{cm} \). \nStep 2: Mark external point Q such that \( OQ = 7\ \text{cm} \). \nStep 3: Locate midpoint M of OQ, so \( OM = \frac{7}{2} = 3.5\ \text{cm} \). \nStep 4: With M as centre and radius \( 3.5\ \text{cm} \), draw a circle passing through O and Q. \nStep 5: Let this circle cut the original circle at T1 and T2. Join Q to T1 and Q to T2 to get the two tangents. \nVerification — angle OT1Q = 90° (angle in semicircle). In right triangle OT1Q: \[ QT_1 = \sqrt{OQ^2 - OT_1^2} \] \[ QT_1 = \sqrt{(7)^2 - (3)^2} \] \[ QT_1 = \sqrt{49 - 9} \] \[ QT_1 = \sqrt{40} \] \[ QT_1 = 2\sqrt{10} \approx 6.32\ \text{cm} \]

Answer: Length of each tangent \( = 2\sqrt{10} \approx 6.32\ \text{cm} \)

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \) and radius \( 4\ cm \). Take a point \( P \) at a distance \( 7\ cm \) from the centre \( O \). Construct the two tangents \( PT_1 \) and \( PT_2 \) from point \( P \) to the circle and measure their lengths.

Solution

  1. Step 1: Draw the circle: Draw a circle with centre \( O \) and radius \( r = 4\ cm \) using a compass.
  2. Step 2: Mark the external point: Mark a point \( P \) such that \( OP = 7\ cm \). The point \( P \) lies outside the circle since \( OP = 7\ cm > r = 4\ cm \).
  3. Step 3: Find the midpoint of OP: Bisect the segment \( OP \) to find its midpoint \( M \). Then \( OM = MP = 3.5\ cm \).
  4. Step 4: Draw the auxiliary circle: With \( M \) as centre and radius \( MM = 3.5\ cm \) (i.e., half of \( OP \)), draw a circle. This auxiliary circle will pass through both \( O \) and \( P \).
  5. Step 5: Locate the points of tangency: Let the auxiliary circle intersect the original circle at points \( T_1 \) and \( T_2 \). These are the points of tangency.
  6. Step 6: Draw the tangents: Join \( P \) to \( T_1 \) and \( P \) to \( T_2 \). The lines \( PT_1 \) and \( PT_2 \) are the required tangents to the circle from \( P \).
  7. Step 7: Verify the angle at the point of contact: Check that \( \angle OT_1P = 90^\circ \) and \( \angle OT_2P = 90^\circ \), confirming \( OT_1 \perp PT_1 \) and \( OT_2 \perp PT_2 \).
  8. Step 8: Calculate the length of each tangent: Using the tangent-length formula with \( OP = 7\ cm \) and \( r = 4\ cm \): \[ PT = \sqrt{OP^2 - r^2} = \sqrt{7^2 - 4^2} = \sqrt{49 - 16} = \sqrt{33} \approx 5.74\ cm \]

Answer: Two tangents \( PT_1 \) and \( PT_2 \) are drawn from point \( P \) to the circle, each of length \( \sqrt{33} \approx 5.74\ cm \).

Everything you get with Solver7

More questions in Geometric Contructions