SOLVER7 Study. Nothing Else.
2019 Board Paper QA (i)

Draw seg \(AB\) of length \(5.7\ cm\) and bisect it.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a piece of ribbon that is 5.7 cm long. You want to fold it exactly in the middle so both halves match perfectly. A perpendicular bisector is like that fold line — it cuts the ribbon into two equal pieces and stands straight up at a right angle. We draw it using a compass and a ruler. When we find that fold point on segment AB, both pieces measure exactly 2.85 cm each. The line through that middle point is called the perpendicular bisector.

Answer: The line \(PQ\) is the perpendicular bisector of segment \(AB\), meeting \(AB\) at its midpoint \(M\), where \(AM = MB = 2.85\ cm\).

📖 Construction: Drawing and Bisecting a Line Segment of 5.7 cm

Detailed Explanation

The perpendicular bisector of a line segment is a line that cuts the segment exactly into two equal halves at a right angle \(90^\circ\). To bisect a segment, we use a compass to draw two arcs from each endpoint with the same radius (more than half the length of the segment). These arcs intersect at two points, one above and one below the segment. Joining these two points gives the perpendicular bisector, which passes through the midpoint of the segment. Here, the segment \(AB\) has length \(5.7\ cm\), so its midpoint will divide it into two parts of \(2.85\ cm\) each.

Formula Used

If \(M\) is the midpoint of segment \(AB\), then \(AM = MB = \dfrac{AB}{2} = \dfrac{5.7}{2} = 2.85\ cm\).

Solution

  1. Step 1: Draw segment \(AB\). Using a ruler, draw a line segment \(AB\) of length \(5.7\ cm\). Mark the endpoints clearly as \(A\) and \(B\).
  2. Step 2: Choose a suitable compass radius. Open the compass to a radius greater than half of \(AB\), i.e., more than \(2.85\ cm\). Taking a radius of about \(3.5\ cm\) works well. This ensures that arcs drawn from \(A\) and \(B\) will intersect.
  3. Step 3: Draw arcs from point \(A\). Place the compass needle on point \(A\) and draw one arc above the segment and another arc below the segment.
  4. Step 4: Draw arcs from point \(B\) with the same radius. Without changing the compass radius, place the needle on point \(B\) and draw arcs above and below the segment so that they cut the earlier arcs. Let these intersection points be \(P\) (above) and \(Q\) (below).
  5. Step 5: Join \(P\) and \(Q\). Using a ruler, draw a straight line through \(P\) and \(Q\). This line intersects \(AB\) at a point \(M\).
  6. Step 6: Verify the bisection. Measure \(AM\) and \(MB\) with the ruler. You will find \[AM = MB = 2.85\ cm.\] Also, line \(PQ\) makes a right angle with \(AB\) at \(M\), so \(PQ\) is the perpendicular bisector of \(AB\).

Final Answer

The line \(PQ\) is the perpendicular bisector of segment \(AB\), meeting \(AB\) at its midpoint \(M\), where \(AM = MB = 2.85\ cm\).

Common Mistake

A common mistake is taking the compass radius less than half of \(AB\) (less than \(2.85\ cm\)). In that case, the arcs drawn from \(A\) and \(B\) will not intersect, and the perpendicular bisector cannot be drawn. Always keep the radius greater than half the length of the segment.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a straight line segment \(AB\) of length \(5.7\) cm using a ruler, and label both endpoints clearly as \(A\) and \(B\). — Reason: This is the segment whose perpendicular bisector we need to construct.
  2. Step 2: Calculate half the length of \(AB\): \[\frac{5.7}{2} = 2.85 \text{ cm}\] Then open your compass to any radius greater than \(2.85\) cm; a radius of about \(3.5\) cm works well. — Reason: The compass radius must exceed half the segment length so that arcs drawn from both ends actually cross each other.
  3. Step 3: Place the compass needle at point \(A\) and, keeping the radius fixed, draw one arc above segment \(AB\) and one arc below segment \(AB\). — Reason: These arcs will later intersect with arcs drawn from \(B\) to locate the two key construction points.
  4. Step 4: Without changing the compass radius, move the needle to point \(B\) and draw arcs above and below segment \(AB\) so they cut through the arcs drawn in Step 3. Label the upper intersection point \(P\) and the lower intersection point \(Q\). — Reason: Using the same radius from both endpoints guarantees that \(P\) and \(Q\) are each equidistant from \(A\) and \(B\), which is the geometric condition for lying on the perpendicular bisector.
  5. Step 5: Use a ruler to draw a straight line through points \(P\) and \(Q\). Let \(M\) denote the point where line \(PQ\) crosses segment \(AB\). — Reason: Joining \(P\) and \(Q\) produces the perpendicular bisector; the crossing point \(M\) is the midpoint of \(AB\).
  6. Step 6: Verify the construction by measuring: \(AM\) and \(MB\) should each equal \(2.85\) cm, and the angle between \(PQ\) and \(AB\) at \(M\) should be \(90^\circ\). — Reason: This confirms that \(PQ\) is both perpendicular to and bisects segment \(AB\), satisfying the definition of a perpendicular bisector.

Final Answer

The line \(PQ\) is the perpendicular bisector of segment \(AB\), meeting \(AB\) at its midpoint \(M\), where \(AM = MB = 2.85\ cm\).

Common Mistake

One common mistake: Setting the compass radius to exactly half the length of \(AB\) (i.e., exactly \(2.85\) cm) — at this radius the arcs from \(A\) and \(B\) meet at only one point on the segment itself and do not form two distinct intersection points above and below, so no bisector line can be drawn.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw segment \(AB = 5.7 \ cm\) using a ruler.
  2. Step 2: Set compass radius \(> 2.85 \ cm\) (e.g., \(3.5 \ cm\)); draw arcs above and below \(AB\) from \(A\), then from \(B\) with the same radius. Label intersections \(P\) (above) and \(Q\) (below).
  3. Step 3: Join \(P\) and \(Q\); line \(PQ\) meets \(AB\) at midpoint \(M\), with \(AM = MB = 2.85 \ cm\) and \(\angle PMA = 90 \circ\).

Answer: The line \(PQ\) is the perpendicular bisector of segment \(AB\), meeting \(AB\) at its midpoint \(M\), where \(AM = MB = 2.85\ cm\).

➕ More Examples

More Examples

Example 1

Question: Draw a segment XY of length 8.4 cm and bisect it using a compass and ruler. Verify by measuring both halves.

Solution: Step 1: Draw segment XY of length 8.4 cm using a ruler and mark the endpoints X and Y. \nStep 2: Open the compass to a radius greater than half of 8.4 cm, i.e., greater than 4.2 cm. A suitable radius is about 5 cm. \nStep 3: With X as centre, draw arcs above and below XY. \nStep 4: Without changing the compass width, place the compass at Y and draw arcs above and below XY, intersecting the previous arcs at points P (above) and Q (below). \nStep 5: Join P and Q with a straight line. Let the point where PQ crosses XY be M. M is the midpoint of XY. \nStep 6: Verification — each half measures: \nThe expected length of each half is \[ \frac{8.4}{2} = 4.2 \text{ cm} \] \nMeasure XM and MY; both should equal 4.2 cm.

Answer: Each half XM = MY = 4.2 cm

Example 2

Question: A line segment PQ measures 6.6 cm. Construct the perpendicular bisector of PQ using a compass. Name the midpoint and state the length of each half.

Solution: Step 1: Draw segment PQ = 6.6 cm using a ruler. \nStep 2: Open the compass to a radius more than half of PQ. Since half of 6.6 cm is 3.3 cm, set the radius to approximately 4 cm. \nStep 3: Keeping the same compass opening, draw two arcs (one above, one below PQ) with P as centre. \nStep 4: With the compass still at the same opening, place it at Q and draw two arcs above and below PQ that intersect the arcs drawn in Step 3 at points R and S. \nStep 5: Draw line RS. Label the point where RS intersects PQ as M. RS is the perpendicular bisector of PQ, and M is the midpoint. \nStep 6: Calculate each half: \[ PM = MQ = \frac{6.6}{2} = 3.3 \text{ cm} \] \nStep 7: Verify by measuring PM and MQ with a ruler — each should read 3.3 cm.

Answer: Midpoint M divides PQ such that PM = MQ = 3.3 cm

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a line segment CD of length 8.4 cm. Construct its perpendicular bisector using a compass and ruler. Name the midpoint as N and verify the lengths CN and ND.

Solution

  1. Step 1: Draw the segment: Using a ruler, draw a line segment CD of length 8.4 cm. Mark the endpoints C and D clearly.
  2. Step 2: Set the compass: Open the compass to a radius greater than half of CD, i.e., greater than 4.2 cm. A convenient setting is about 5 cm.
  3. Step 3: Draw arcs from C: Place the compass needle at point C and draw arcs above and below the line segment CD.
  4. Step 4: Draw arcs from D: Without changing the compass width, place the needle at point D and draw arcs above and below the segment so that they intersect the arcs drawn from C. Label the two intersection points as P and Q.
  5. Step 5: Draw the perpendicular bisector: Join points P and Q with a straight line. The line PQ is the perpendicular bisector of segment CD.
  6. Step 6: Mark the midpoint: The point where line PQ crosses segment CD is the midpoint N.
  7. Step 7: Verify the lengths: Measure CN and ND using the ruler. Each should equal half of 8.4 cm: \[CN = ND = \frac{8.4}{2} = 4.2 \text{ cm}\]

Answer: The line PQ is the perpendicular bisector of segment CD, meeting CD at its midpoint N, where \(CN = ND = 4.2 \text{ cm}\).

Everything you get with Solver7

More questions in Geometric Contructions