SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q6

Draw a circle with centre \(P\) and radius \(3.4\ cm.\) Take point \(Q\) at a distance \(5.5\ cm\) from the centre. Construct tangents to the circle from point \(Q.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle drawn on paper, like a wheel. Now pick a point outside the wheel. You can draw exactly two straight lines from that point that just graze the edge of the wheel without going inside. Those lines are called tangents. Both lines are always the same length from the outside point. Here, the outside point is about 5.5 cm away from the centre, and the wheel has a radius of 3.4 cm. Each tangent line turns out to be roughly 4.3 cm long.

Answer: Two tangents \(QT\) and \(QS\) are constructed from point \(Q\) to the circle, each of length approximately \(4.3\ cm\).

📖 Constructing Tangents to a Circle from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. From any external point, exactly two tangents can be drawn to a circle, and they are equal in length. The key idea used in this construction is that the tangent at any point of a circle is perpendicular to the radius at the point of contact. So, if \(Q\) is the external point and \(T\) is the point of contact, then \(\angle PTQ = 90^\circ\). This means \(T\) lies on a circle whose diameter is \(PQ\) (angle in a semicircle is \(90^\circ\)). So we bisect \(PQ\), draw a circle with \(PQ\) as diameter, and its intersection with the original circle gives the points of contact.

Formula Used

Length of tangent from external point: \( QT = \sqrt{PQ^2 - PT^2} = \sqrt{5.5^2 - 3.4^2} \approx 4.33\ cm \)

Solution

  1. Step 1: Draw a circle with centre \(P\) and radius \(3.4\ cm\) using a compass. This is the given circle to which tangents must be drawn.
  2. Step 2: Mark a point \(Q\) outside the circle such that \(PQ = 5.5\ cm\). Join \(P\) and \(Q\) with a straight line segment. Since \(5.5 > 3.4\), point \(Q\) lies outside the circle, so two tangents are possible.
  3. Step 3: Draw the perpendicular bisector of segment \(PQ\). To do this, take a radius slightly more than half of \(PQ\), and draw arcs from both \(P\) and \(Q\) above and below the line. Join the intersection points of these arcs. Let this bisector cut \(PQ\) at point \(M\). Then \(M\) is the midpoint of \(PQ\), so \(PM = MQ = 2.75\ cm\).
  4. Step 4: With \(M\) as centre and radius \(MP = MQ = 2.75\ cm\), draw a new circle. This circle passes through both \(P\) and \(Q\), meaning \(PQ\) is its diameter.
  5. Step 5: This new circle intersects the original circle (centre \(P\), radius \(3.4\ cm\)) at two points. Name them \(T\) and \(S\). These are the required points of contact of the tangents.
  6. Step 6: Join \(Q\) to \(T\) and \(Q\) to \(S\). The lines \(QT\) and \(QS\) are the two required tangents to the circle from point \(Q\). Since \(\angle PTQ\) and \(\angle PSQ\) are angles in a semicircle, each equals \(90^\circ\), confirming \(QT \perp PT\) and \(QS \perp PS\).
  7. Step 7: Verify by measuring: \(QT\) and \(QS\) should each be approximately \(4.3\ cm\), which matches \( \sqrt{5.5^2 - 3.4^2} = \sqrt{30.25 - 11.56} = \sqrt{18.69} \approx 4.33\ cm \).

Final Answer

Two tangents \(QT\) and \(QS\) are constructed from point \(Q\) to the circle, each of length approximately \(4.3\ cm\).

Common Mistake

A very common mistake is to draw the second (auxiliary) circle with \(PQ\) as radius instead of as diameter. Remember, we need \(PQ\) to be the diameter of the new circle, so its centre must be at the midpoint \(M\) of \(PQ\), not at \(P\) or \(Q\).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre P and radius \( 3.4 \text{ cm} \) using a compass. — Reason: This is the given circle to which we need to construct the tangents.
  2. Step 2: Mark an external point Q such that \( PQ = 5.5 \text{ cm} \), then draw the line segment PQ. — Reason: Since \( 5.5 > 3.4 \), point Q lies outside the circle, which guarantees that exactly two tangents can be drawn from Q.
  3. Step 3: Find the midpoint M of segment PQ by constructing its perpendicular bisector: open the compass to a radius slightly more than half of PQ, draw arcs from both P and Q above and below the line, and connect the arc intersections. Label the point where this bisector meets PQ as M, so \( PM = MQ = 2.75 \text{ cm} \). — Reason: We need M because a circle drawn with M as centre and MQ as radius will pass through any point on PQ where the angle in the semicircle is \( 90 \circ \).
  4. Step 4: With M as centre and \( MQ = 2.75 \text{ cm} \) as radius, draw a new circle. — Reason: By the angle-in-a-semicircle theorem, any point lying on this circle and also on the original circle will form a \( 90 \circ \) angle with PQ, which is exactly the condition for a tangent.
  5. Step 5: Mark the two points where the new circle intersects the original circle; call them T and S. Draw line segments QT and QS. — Reason: At both T and S, the angle \( \angle PTQ = \angle PSQ = 90 \circ \), confirming that QT and QS are tangents to the original circle.
  6. Step 6: Verify the tangent length using the formula. Substituting the known values: \[ QT = \sqrt{PQ^2 - PT^2} = \sqrt{(5.5)^2 - (3.4)^2} \] Evaluating: \[ QT = \sqrt{30.25 - 11.56} = \sqrt{18.69} \approx 4.3 \text{ cm} \] — Reason: This numerical check using the Pythagorean theorem confirms that the constructed tangent length matches the expected value.

Final Answer

Two tangents \(QT\) and \(QS\) are constructed from point \(Q\) to the circle, each of length approximately \(4.3\ cm\).

Common Mistake

One common mistake: Students sometimes draw the second circle using PQ as the radius instead of half of PQ (i.e., MQ) as the radius, which produces an incorrect construction that does not locate the tangent contact points.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw circle with centre \(P\), radius \(3.4\ cm\). Mark external point \(Q\) with \(PQ = 5.5\ cm\).
  2. Step 2: Bisect \(PQ\) to get midpoint \(M\) where \(PM = MQ = 2.75\ cm\). Draw a circle centred at \(M\) with radius \(2.75\ cm\) (diameter \(PQ\)).
  3. Step 3: Mark points \(T\) and \(S\) where the two circles intersect. Join \(QT\) and \(QS\) — these are the required tangents.
  4. Step 4: Verification: \(QT = \sqrt{5.5^2 - 3.4^2} = \sqrt{30.25 - 11.56} = \sqrt{18.69} \approx 4.3\ cm\)

Answer: Two tangents \(QT\) and \(QS\) are constructed from point \(Q\) to the circle, each of length approximately \(4.3\ cm\).

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre O and radius 2.8 cm. Take a point A at a distance of 6.5 cm from O. Construct the tangents to the circle from point A. Also find the length of each tangent.

Solution: Step 1 — Draw the circle. Draw a circle with centre O and radius \( r = 2.8 \text{ cm} \). \nStep 2 — Mark the external point. Mark point A such that \( OA = 6.5 \text{ cm} \). \nStep 3 — Find the midpoint. Find the midpoint M of segment OA. Since \( OA = 6.5 \text{ cm} \), we have \[ OM = \frac{6.5}{2} = 3.25 \text{ cm} \] \nStep 4 — Draw the auxiliary circle. With M as centre and radius 3.25 cm, draw a circle. \nStep 5 — Mark tangent points. Let this auxiliary circle intersect the original circle at points T1 and T2. \nStep 6 — Draw tangents. Join A to T1 and A to T2. These are the required tangents. \nVerification using the formula: \[ l = \sqrt{OA^2 - r^2} = \sqrt{(6.5)^2 - (2.8)^2} \] \[ l = \sqrt{42.25 - 7.84} = \sqrt{34.41} \approx 5.87 \text{ cm} \]

Answer: The length of each tangent from A to the circle is approximately \( 5.87 \text{ cm} \).

Example 2

Question: A circle is drawn with centre C and radius 4.2 cm. A point B is located 7.0 cm from centre C. Construct the two tangents from B to the circle and calculate the length of each tangent.

Solution: Step 1 — Draw the circle. Draw a circle with centre C and radius \( r = 4.2 \text{ cm} \). \nStep 2 — Mark the external point. Mark point B such that \( CB = 7.0 \text{ cm} \). \nStep 3 — Find the midpoint. Find the midpoint M of segment CB. \[ CM = \frac{CB}{2} = \frac{7.0}{2} = 3.5 \text{ cm} \] \nStep 4 — Draw the auxiliary circle. With M as centre and radius 3.5 cm, draw a circle. \nStep 5 — Mark tangent points. Let this auxiliary circle meet the original circle at points P1 and P2. \nStep 6 — Draw tangents. Join B to P1 and B to P2. Lines BP1 and BP2 are the required tangents. The angle \( \angle CP_1B = 90^\circ \) (angle in semicircle), confirming P1 is a point of tangency. \nCalculation of tangent length: \[ l = \sqrt{CB^2 - r^2} = \sqrt{(7.0)^2 - (4.2)^2} \] \[ l = \sqrt{49 - 17.64} = \sqrt{31.36} = 5.6 \text{ cm} \]

Answer: The length of each tangent from B to the circle is exactly \( 5.6 \text{ cm} \).

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \) and radius \( 2.8 \) cm. Take a point \( A \) at a distance of \( 6.5 \) cm from the centre \( O \). Construct tangents to the circle from point \( A \) and measure their lengths. Verify your answer using the tangent-length formula.

Solution

  1. Step 1: Draw the given circle: Draw a circle with centre \( O \) and radius \( r = 2.8 \) cm using a compass.
  2. Step 2: Mark the external point: Mark a point \( A \) such that \( OA = 6.5 \) cm. Ensure \( A \) lies outside the circle, which is confirmed since \( 6.5 > 2.8 \).
  3. Step 3: Find the midpoint of OA: Draw the segment \( OA \). Find its midpoint \( M \) by constructing the perpendicular bisector of \( OA \). The midpoint \( M \) is at a distance of \( 3.25 \) cm from both \( O \) and \( A \).
  4. Step 4: Draw the auxiliary circle: With \( M \) as centre and \( MA = MO = 3.25 \) cm as radius, draw a circle. This is the auxiliary (helper) circle.
  5. Step 5: Mark the points of tangency: Let the auxiliary circle intersect the original circle at points \( T_1 \) and \( T_2 \). These are the points of tangency.
  6. Step 6: Draw the tangents: Join \( A \) to \( T_1 \) and \( A \) to \( T_2 \). The line segments \( AT_1 \) and \( AT_2 \) are the required tangents from point \( A \) to the circle.
  7. Step 7: Verify using the formula: Using the tangent-length formula with \( d = 6.5 \) cm and \( r = 2.8 \) cm: \[ \text{Length of tangent} = \sqrt{d^2 - r^2} = \sqrt{(6.5)^2 - (2.8)^2} \] Calculating each term: \[ (6.5)^2 = 42.25 \] and \[ (2.8)^2 = 7.84 \] So the length is \[ \sqrt{42.25 - 7.84} = \sqrt{34.41} \approx 5.87 \text{ cm} \]

Answer: Two tangents \( AT_1 \) and \( AT_2 \) are constructed from point \( A \) to the circle with centre \( O \) and radius \( 2.8 \) cm, each of length approximately \( 5.87 \) cm (i.e., \( \sqrt{34.41} \approx 5.87 \) cm).

Everything you get with Solver7

More questions in Geometric Contructions