SOLVER7 Study. Nothing Else.
Practice Set 10.2 Q3

Draw a circle of radius \(3.6\ cm.\) Draw a tangent to the circle at any point on it without using the centre.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a ball sitting on a flat road. The road just barely touches the ball at one tiny spot. That touching line is called a tangent. Normally, you need to know the ball's centre to draw it. But there is a clever trick using angles inside the circle instead. Two angles that look at the same chord end up being equal. We use that matching-angles idea to draw the touching line perfectly, without ever finding the centre of the circle.

Answer: The line PT drawn at point P such that \(\angle TPQ = \angle PRQ\) is the required tangent to the circle of radius \(3.6\ cm\), constructed without using the centre.

📖 Tangent to a Circle at a Point Without Using the Centre

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point, called the point of contact. Usually, we draw a tangent at a point by joining that point to the centre and drawing a line perpendicular to this radius. But when the centre is not known, we use the Alternate Segment Theorem (also called the tangent-chord angle property). This theorem states that the angle between a tangent to a circle and a chord drawn from the point of contact is equal to the angle subtended by that chord in the alternate segment of the circle. Using this, we can construct a tangent without needing the centre.

Formula Used

Alternate Segment Theorem: The angle between a tangent and a chord through the point of contact equals the angle in the alternate segment. That is, if PT is the tangent at P and PQ is a chord, then \(\angle TPQ = \angle PRQ\), where R lies in the alternate segment.

Solution

  1. Step 1: Draw a circle of radius \(3.6\ cm\) using a compass. Mark any point P on the circumference of the circle. This point P will be the point at which we need to draw the tangent.
  2. Step 2: From point P, draw any chord PQ inside the circle. The chord can be of any convenient length, as long as Q lies on the circle.
  3. Step 3: Take any point R on the major arc (the larger part of the circle on the opposite side of chord PQ). Join RP and RQ to form \(\angle PRQ\) in the alternate segment.
  4. Step 4: Measure \(\angle PRQ\) using a protractor, or construct an equal angle directly. At point P, on the side of chord PQ opposite to R, construct an angle equal to \(\angle PRQ\) using PQ as one arm. Let the other arm of this new angle be along a line PT.
  5. Step 5: Extend PT on both sides of P to get the full straight line. This line PT is the required tangent to the circle at point P, because by the Alternate Segment Theorem, \(\angle TPQ = \angle PRQ\) ensures PT touches the circle only at P.

Final Answer

The line PT drawn at point P such that \(\angle TPQ = \angle PRQ\) is the required tangent to the circle of radius \(3.6\ cm\), constructed without using the centre.

Common Mistake

A common mistake is constructing the angle \(\angle TPQ\) on the same side of chord PQ as point R, instead of the opposite side. The tangent must be drawn in the alternate segment side, otherwise the constructed line will not touch the circle at only one point.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Using a compass set to a radius of \( 3.6 \text{ cm} \), draw a circle and mark any point P on its circumference. — Reason: P will be the exact point where the tangent must touch the circle, so we fix it first.
  2. Step 2: Draw a chord PQ by joining P to any other point Q on the circle. — Reason: The chord PQ is needed so we can apply the Alternate Segment Theorem; the chord divides the circle into two arcs (segments).
  3. Step 3: Choose any point R on the major arc (the larger arc on the opposite side of PQ from where the tangent will be drawn). Join R to both P and Q so that \( \angle PRQ \) is formed inside the alternate segment. — Reason: By the Alternate Segment Theorem, the tangent-chord angle at P must equal this inscribed angle \( \angle PRQ \), so we need to measure or replicate it.
  4. Step 4: Measure \( \angle PRQ \) with a protractor. Note its value carefully. — Reason: This angle is the reference angle we must reproduce at point P on the other side of the chord PQ to locate the tangent direction.
  5. Step 5: At point P, on the side of chord PQ opposite to arc PRQ, construct an angle equal to \( \angle PRQ \). Label the ray you draw as PT. — Reason: The Alternate Segment Theorem guarantees that if \( \angle TPQ = \angle PRQ \), then PT is tangent to the circle at P; reproducing the angle gives us the correct tangent direction without needing the centre.
  6. Step 6: Extend the ray PT in both directions through P to form a complete straight line. — Reason: A tangent is a full line (not just a ray), so extending it confirms the line touches the circle at exactly the single point P.
  7. Step 7: Verify the construction by checking that \( \angle TPQ = \angle PRQ \) using the protractor. — Reason: This check confirms the Alternate Segment Theorem condition is satisfied and that PT is indeed the required tangent at P.

Final Answer

The line PT drawn at point P such that \(\angle TPQ = \angle PRQ\) is the required tangent to the circle of radius \(3.6\ cm\), constructed without using the centre.

Common Mistake

One common mistake: Students sometimes draw the angle \( \angle TPQ \) on the same side as the arc PRQ instead of the opposite (alternate) side, which produces a secant direction rather than the tangent direction.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle of radius \( 3.6\ cm \). Mark point P on the circumference. Draw chord PQ of any convenient length with Q on the circle.
  2. Step 2: Mark any point R on the major arc. Join RP and RQ to form \( \angle PRQ \) in the alternate segment.
  3. Step 3: At point P, on the opposite side of chord PQ from R, construct \( \angle TPQ = \angle PRQ \).
  4. Step 4: Extend the line PT on both sides; PT is the required tangent at P by the Alternate Segment Theorem.

Answer: The line PT drawn at point P such that \(\angle TPQ = \angle PRQ\) is the required tangent to the circle of radius \(3.6\ cm\), constructed without using the centre.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 4.2 \) cm. Mark any point P on the circle. Without using the centre of the circle, draw a tangent to the circle at point P.

Solution: Step 1: Draw a circle of radius \( 4.2 \) cm and mark a point P on it. \nStep 2: Draw any chord PQ through P (choose Q as another point on the circle). \nStep 3: Find the midpoint M of PQ by drawing the perpendicular bisector of PQ. \nStep 4: With M as centre and MP (\( = \) MQ) as radius, draw a semicircle on the chord PQ, on the opposite side of P from the interior direction you prefer. \nStep 5: Mark any point R on this semicircle. Join P to R and Q to R. \nBy the angle-in-a-semicircle theorem, \( \angle PRQ = 90^\circ \). \nStep 6: At point P, draw line PT such that \( \angle QPT = \angle QRP \). This ensures PT is perpendicular to the radius at P (since the angle between chord PQ and the tangent equals the angle in the alternate segment). \nThe line PT drawn through P is the required tangent to the circle at P.

Answer: A tangent line PT is drawn at point P on the circle of radius \( 4.2 \) cm without using the centre, using the angle-in-a-semicircle construction.

Example 2

Question: A circle of radius \( 3 \) cm is drawn. A student wants to construct a tangent at a point A on this circle without locating the centre. Describe the complete construction steps and draw the tangent.

Solution: Step 1: Construct a circle of radius \( 3 \) cm. Mark any point A on the circle. \nStep 2: Through A, draw a chord AB, where B is another point on the circle. \nStep 3: Locate the midpoint N of AB by constructing the perpendicular bisector of AB. \nStep 4: With N as centre and NA \( = \) NB as radius, draw a semicircle on chord AB. \nStep 5: Choose any point S on this semicircle. Join A to S and B to S. \nBy the angle-in-a-semicircle theorem, \( \angle ASB = 90^\circ \). \nStep 6: At A, construct line AL such that \( \angle BAL = \angle BAS \). By the tangent-chord angle (alternate segment) theorem, AL is perpendicular to the radius at A and is therefore tangent to the circle at A. \nVerification: The angle between the tangent AL and chord AB equals the angle in the alternate segment, confirming AL is the tangent. \nThe line AL is the required tangent at A.

Answer: The tangent AL is successfully drawn at point A on the circle of radius \( 3 \) cm without using the centre, by applying the angle-in-a-semicircle and alternate segment theorem.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius 4.2 cm. Take any point M on the circle. Without using the centre of the circle, draw a tangent to the circle at point M. Write the steps of construction.

Solution

  1. Step 1: Draw the Circle: Using a compass, draw a circle of radius \(4.2\) cm. Mark any point M on the circumference of this circle.
  2. Step 2: Draw a Chord: Draw a chord MN from point M to any other point N on the circle. This chord divides the circle into two arcs.
  3. Step 3: Mark a Point on the Arc: Take any point S on the major arc MN (i.e., the arc that does not contain the shorter part). Join S to M and S to N to form the inscribed angle \(\angle MSN\) in the major segment.
  4. Step 4: Measure the Inscribed Angle: Measure the angle \(\angle MSN\) using a protractor. This is the angle in the alternate segment with respect to the chord MN.
  5. Step 5: Construct the Tangent: At point M, on the opposite side of chord MN from arc MSN, draw a ray MT such that \(\angle TMN = \angle MSN\). By the Alternate Segment Theorem, the line MT is the required tangent to the circle at point M.
  6. Step 6: Verify: The line MT drawn at point M is the tangent to the circle of radius \(4.2\) cm at M, constructed without using the centre, because \(\angle TMN = \angle MSN\) satisfies the Alternate Segment Theorem.

Answer: The line MT drawn at point M such that \(\angle TMN = \angle MSN\) is the required tangent to the circle of radius \(4.2\) cm, constructed without using the centre.

Everything you get with Solver7

More questions in Geometric Contructions