SOLVER7 Study. Nothing Else.
2018 Board Paper Q3

Draw the circle with centre \(C\) and radius \(3.6\ cm.\) Take point \(B\) which is at distance \(7.2\ cm\) from the centre. Draw tangents to the circle from point \(B.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle drawn on paper, like a wheel. Now pick a spot far outside the wheel. You can touch the wheel's edge with a straight ruler in exactly two ways, without crossing inside it. Those two touching lines are called tangents. A clever trick using a helper circle helps us find those exact touching spots. Both touching lines turn out to be the same length. Here, the two tangent lines from the outside point each measure about \(6.24\ cm\) long.

Answer: Two tangents \(BP\) and \(BQ\) are drawn from external point \(B\) to the circle with centre \(C\), each of length approximately \(6.24\ cm\).

📖 Constructing Tangents to a Circle from an External Point

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. From any external point, exactly two tangents can be drawn to a circle, and they are equal in length. To construct these tangents, we use a key property: the tangent at any point of a circle is perpendicular to the radius at the point of contact. So if we can find points on the circle where the radius makes a right angle with a line from the external point, those lines will be tangents. The clever trick is to draw a circle whose diameter is the segment joining the centre and the external point. By Thales' theorem, any angle inscribed in a semicircle is a right angle, so the points where this new circle intersects the original circle are exactly the points of contact of the two tangents.

Formula Used

Key property: The tangent at any point of a circle is perpendicular to the radius through the point of contact. Thales' theorem: An angle inscribed in a semicircle equals \(90^\circ\).

Solution

  1. Step 1: Draw a circle with centre \(C\) and radius \(3.6\ cm\) using a compass.
  2. Step 2: Mark a point \(B\) outside the circle such that \(CB = 7.2\ cm\). Draw the segment \(CB\) using a ruler.
  3. Step 3: Find the midpoint \(M\) of segment \(CB\) by drawing its perpendicular bisector. Since \(CB = 7.2\ cm\), we get \(CM = MB = 3.6\ cm\).
  4. Step 4: With \(M\) as centre and radius \(MC = MB = 3.6\ cm\), draw another circle. This new circle has \(CB\) as its diameter.
  5. Step 5: The second circle will intersect the original circle at two points. Name these points \(P\) and \(Q\). These are the points of contact of the required tangents.
  6. Step 6: Join \(B\) to \(P\) and \(B\) to \(Q\) using a ruler. The lines \(BP\) and \(BQ\) are the required tangents from point \(B\) to the circle with centre \(C\).
  7. Step 7: Verification: Since \(\angle CPB\) and \(\angle CQB\) are angles in a semicircle (of the circle with diameter \(CB\)), each equals \(90^\circ\). Hence \(CP \perp BP\) and \(CQ \perp BQ\), confirming that \(BP\) and \(BQ\) are tangents. Also, using Pythagoras theorem in \(\triangle CPB\): \[BP = \sqrt{CB^2 - CP^2} = \sqrt{(7.2)^2 - (3.6)^2} = \sqrt{51.84 - 12.96} = \sqrt{38.88} \approx 6.24\ cm.\]

Final Answer

Two tangents \(BP\) and \(BQ\) are drawn from external point \(B\) to the circle with centre \(C\), each of length approximately \(6.24\ cm\).

Common Mistake

A common mistake is trying to draw tangents by eye — simply drawing lines from \(B\) that appear to touch the circle. This gives inaccurate tangents. The correct method is to use the midpoint of \(CB\) as the centre of an auxiliary circle so that the tangent points are located precisely using the right-angle property.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \(C\) and radius \(3.6\ cm\) using a compass. — Reason: This is the given circle to which we need to construct the tangents.
  2. Step 2: Mark an external point \(B\) such that the distance \(CB = 7.2\ cm\), and join \(C\) and \(B\) with a straight line. — Reason: The problem requires the tangents to be drawn from this specific external point, and we must establish its exact position first.
  3. Step 3: Construct the perpendicular bisector of segment \(CB\) to locate its midpoint \(M\). Since \(CB = 7.2\ cm\), we get \(CM = MB = 3.6\ cm\). — Reason: We need the midpoint \(M\) so that \(CB\) can serve as the diameter of a new auxiliary circle, which will help us find the tangent points using Thales' theorem.
  4. Step 4: With \(M\) as centre and radius \(MB = MC = 3.6\ cm\), draw a second (auxiliary) circle. — Reason: Any point lying on a circle with diameter \(CB\) will subtend a right angle at \(CB\) by Thales' theorem, which is exactly the condition we need for a tangent.
  5. Step 5: Label the two points where the auxiliary circle intersects the original circle as \(P\) and \(Q\). Draw lines \(BP\) and \(BQ\). — Reason: At each intersection point, \(\angle CPB = \angle CQB = 90^\circ\) by Thales' theorem, confirming that \(BP\) and \(BQ\) are tangents to the original circle.
  6. Step 6: Verify the tangent length using the Pythagorean theorem. In right triangle \(CPB\): \[BP = \sqrt{CB^2 - CP^2} = \sqrt{(7.2)^2 - (3.6)^2}\] \[BP = \sqrt{51.84 - 12.96} = \sqrt{38.88} \approx 6.24\ cm\] — Reason: Since \(\angle CPB = 90^\circ\), triangle \(CPB\) is right-angled and the Pythagorean theorem directly gives us the tangent length.

Final Answer

Two tangents \(BP\) and \(BQ\) are drawn from external point \(B\) to the circle with centre \(C\), each of length approximately \(6.24\ cm\).

Common Mistake

One common mistake: Students often forget to verify that the two intersection points \(P\) and \(Q\) of the auxiliary circle with the original circle actually exist; if the external point is chosen too close to the circle, the construction may go wrong. Always check that \(CB\) is strictly greater than the radius before starting.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: Circle with centre \(C\), radius \(r = 3.6\ cm\), external point \(B\) with \(CB = 7.2\ cm\).
  2. Step 2: Bisect \(CB\) to get midpoint \(M\) where \(CM = MB = 3.6\ cm\). Draw a circle with centre \(M\) and radius \(3.6\ cm\) (diameter \(= CB\)).
  3. Step 3: Let \(P\) and \(Q\) be the intersection points of the two circles. By Thales' theorem, \(\angle CPB = \angle CQB = 90^\circ\), so \(BP\) and \(BQ\) are tangents.
  4. Step 4: Tangent length \( = \sqrt{(7.2)^2 - (3.6)^2} = \sqrt{51.84 - 12.96} = \sqrt{38.88} \approx 6.24\ cm\).

Answer: Two tangents \(BP\) and \(BQ\) are drawn from external point \(B\) to the circle with centre \(C\), each of length approximately \(6.24\ cm\).

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre C and radius 4 cm. Take a point A at a distance of 8 cm from the centre C. Draw tangents to the circle from point A. Also find the length of each tangent.

Solution: Construction steps: 1. Draw a circle with centre C and radius \( r = 4 \) cm. 2. Mark point A such that \( CA = 8 \) cm. 3. Find the midpoint M of segment CA. 4. Draw a circle with centre M and radius \( MA = MC = 4 \) cm (i.e., with CA as diameter). 5. Let the two circles intersect at points P and Q. 6. Join A to P and A to Q. These are the required tangents. \nVerification using the tangent-length formula: \nGiven \( d = 8 \) cm and \( r = 4 \) cm, \[ l = \sqrt{d^2 - r^2} \] \[ l = \sqrt{8^2 - 4^2} \] \[ l = \sqrt{64 - 16} \] \[ l = \sqrt{48} \] \[ l = 4\sqrt{3} \approx 6.93 \text{ cm} \] \nSince \( \angle CPA = 90^\circ \) (angle in a semicircle), CP is perpendicular to AP, confirming AP is indeed a tangent.

Answer: Length of each tangent \( = 4\sqrt{3} \approx 6.93 \) cm

Example 2

Question: A circle has its centre at O and radius 2.5 cm. Point T is located 6.5 cm from O. Construct the tangents from T to the circle and calculate the length of each tangent.

Solution: Construction steps: 1. Draw a circle with centre O and radius \( r = 2.5 \) cm. 2. Mark point T such that \( OT = 6.5 \) cm. 3. Find the midpoint M of segment OT, so \( OM = MT = 3.25 \) cm. 4. Draw a circle with centre M and radius 3.25 cm (using OT as diameter). 5. Let this circle intersect the original circle at points X and Y. 6. Join T to X and T to Y. These are the required tangents to the circle from T. \nVerification using the tangent-length formula: \nGiven \( d = 6.5 \) cm and \( r = 2.5 \) cm, \[ l = \sqrt{d^2 - r^2} \] \[ l = \sqrt{(6.5)^2 - (2.5)^2} \] \[ l = \sqrt{42.25 - 6.25} \] \[ l = \sqrt{36} \] \[ l = 6 \text{ cm} \] \nSince \( \angle OXT = 90^\circ \) (angle in a semicircle), OX is perpendicular to TX, confirming TX is a tangent.

Answer: Length of each tangent \( = 6 \) cm

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \) and radius \( 4\ \text{cm} \). Take an external point \( P \) at a distance of \( 8.5\ \text{cm} \) from the centre \( O \). Construct the two tangents from point \( P \) to the circle and measure their lengths. Also verify the length using calculation.

Solution

  1. Step 1: Draw the circle: Draw a circle with centre \( O \) and radius \( r = 4\ \text{cm} \) using a compass.
  2. Step 2: Mark the external point: Mark point \( P \) such that \( OP = 8.5\ \text{cm} \). Since \( 8.5 > 4 \), the point \( P \) lies outside the circle.
  3. Step 3: Find the midpoint: Find the midpoint \( M \) of segment \( OP \). Then \( OM = MP = \dfrac{8.5}{2} = 4.25\ \text{cm} \).
  4. Step 4: Draw the auxiliary semicircle: With \( M \) as centre and radius \( 4.25\ \text{cm} \), draw a semicircle (or full circle) that passes through both \( O \) and \( P \).
  5. Step 5: Mark the points of tangency: Let the auxiliary circle intersect the original circle at points \( A \) and \( B \). These are the points of tangency.
  6. Step 6: Draw the tangents: Join \( P \) to \( A \) and \( P \) to \( B \). The segments \( PA \) and \( PB \) are the required tangents to the circle from external point \( P \).
  7. Step 7: Verify using Pythagoras theorem: In the right triangle \( OAP \), the angle at \( A \) is \( 90\circ \) (radius is perpendicular to tangent). So using the Pythagoras theorem: \[ PA = \sqrt{OP^2 - OA^2} \] Substituting the values \( OP = 8.5\ \text{cm} \) and \( OA = 4\ \text{cm} \): \[ PA = \sqrt{(8.5)^2 - (4)^2} \] \[ PA = \sqrt{72.25 - 16} \] \[ PA = \sqrt{56.25} \] \[ PA = 7.5\ \text{cm} \]

Answer: Two tangents \( PA \) and \( PB \) are drawn from external point \( P \) to the circle with centre \( O \), each of length exactly \( 7.5\ \text{cm} \).

Everything you get with Solver7

More questions in Geometric Contructions