SOLVER7 Study. Nothing Else.
2024 Board Paper QB (ii)

\(\Delta ABC\sim \Delta LMN.\) In \(\Delta ABC,\ AB = 5.5\ cm,\) \(BC = 6\ cm,\ CA = 4.5\ cm.\) Construct \(\Delta ABC\) and \(\Delta LMN\) such that \(\dfrac{BC}{MN}=\dfrac{5}{4}.\)

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Think of a photocopier that shrinks a picture to a smaller size. We have a big triangle called triangle ABC. We want to make a smaller copy called triangle LMN. The smaller one is like a shrunken photo — every side gets multiplied by the same shrink amount, which is 4 out of every 5 parts. So all three sides of the big triangle become a little shorter in the same way. The shape stays exactly the same, only the size changes.

Answer: \(\Delta LMN\) is constructed with sides \(MN = 4.8\) cm, \(LM = 4.4\) cm and \(LN = 3.6\) cm, similar to \(\Delta ABC\) in the ratio \(4:5\).

📖 Construction of Similar Triangles (Scale Factor 4/5)

Detailed Explanation

When two triangles are similar, their corresponding sides are in the same ratio. Here \(\Delta ABC \sim \Delta LMN\) with \(\dfrac{BC}{MN} = \dfrac{5}{4}\). This means every side of \(\Delta LMN\) is \(\dfrac{4}{5}\) times the corresponding side of \(\Delta ABC\). So \(\Delta LMN\) is smaller than \(\Delta ABC\). To construct \(\Delta LMN\), we first construct \(\Delta ABC\) using the given three sides (SSS construction). Then we use the basic proportionality (division of a segment in a given ratio) to locate the new base \(MN\) of length \(\dfrac{4}{5} \times BC\), and finally draw lines parallel to the other two sides to complete the smaller similar triangle.

Formula Used

If \(\Delta ABC \sim \Delta LMN\) with \(\dfrac{BC}{MN} = \dfrac{5}{4}\), then \[\dfrac{LM}{AB} = \dfrac{MN}{BC} = \dfrac{LN}{CA} = \dfrac{4}{5}\]

Solution

  1. Step 1: Find the sides of \(\Delta LMN\). Since scale factor is \(\dfrac{4}{5}\): \[MN = \dfrac{4}{5}\times 6 = 4.8\ \text{cm}\] \[LM = \dfrac{4}{5}\times 5.5 = 4.4\ \text{cm}\] \[LN = \dfrac{4}{5}\times 4.5 = 3.6\ \text{cm}\]
  2. Step 2: Construct \(\Delta ABC\). Draw \(BC = 6\) cm. With B as centre and radius \(AB = 5.5\) cm, draw an arc. With C as centre and radius \(CA = 4.5\) cm, draw another arc cutting the first arc at A. Join AB and AC. This gives \(\Delta ABC\).
  3. Step 3: Draw a ray \(BX\) making an acute angle with \(BC\) on the side opposite to A. On \(BX\), mark 5 equal points \(B_1, B_2, B_3, B_4, B_5\) such that \(BB_1 = B_1B_2 = B_2B_3 = B_3B_4 = B_4B_5\). We take 5 points because the denominator of the ratio \(\dfrac{4}{5}\) is 5.
  4. Step 4: Join \(B_5\) to C. Through \(B_4\) (the 4th point, since numerator is 4), draw a line parallel to \(B_5 C\), meeting \(BC\) at point \(M'\). Then \(BM' = \dfrac{4}{5}\times BC = 4.8\ \text{cm}\). Rename B as M and \(M'\) as N, so \(MN = 4.8\) cm forms the base of the new triangle.
  5. Step 5: Through N (i.e. \(M'\)), draw a line parallel to CA, meeting AB at point L. Join ML (which lies along BA). Triangle formed with vertices L, M, N is the required \(\Delta LMN\). By the Basic Proportionality Theorem, \(\Delta LMN \sim \Delta ABC\) with sides in ratio \(4:5\).
  6. Step 6: Verify by measurement: \(MN \approx 4.8\) cm, \(LM \approx 4.4\) cm, \(LN \approx 3.6\) cm, matching the calculated values.

Final Answer

\(\Delta LMN\) is constructed with sides \(MN = 4.8\) cm, \(LM = 4.4\) cm and \(LN = 3.6\) cm, similar to \(\Delta ABC\) in the ratio \(4:5\).

Common Mistake

A very common mistake is confusing the number of division points. Since the ratio is \(\dfrac{4}{5}\), students must mark 5 equal points on the ray (denominator) and then draw the parallel line through the 4th point (numerator). Many students wrongly mark only 4 points or join through the 5th point, giving an incorrect scaled triangle.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the scale factor from the given ratio. We are told \(\dfrac{BC}{MN} = \dfrac{5}{4}\), which means each side of \(\Delta LMN\) equals \(\dfrac{4}{5}\) of the corresponding side of \(\Delta ABC\). — Reason: Knowing the scale factor lets us calculate every side of the required triangle before picking up a compass.
  2. Step 2: Calculate the three sides of \(\Delta LMN\). \[MN = \dfrac{4}{5} \times 6 = 4.8 \text{ cm}\] \[LM = \dfrac{4}{5} \times 5.5 = 4.4 \text{ cm}\] \[LN = \dfrac{4}{5} \times 4.5 = 3.6 \text{ cm}\] — Reason: Multiplying each side of \(\Delta ABC\) by the scale factor gives the exact lengths needed for the construction.
  3. Step 3: Construct \(\Delta ABC\) using SSS. Draw a base segment \(BC = 6\) cm. With centre \(B\) and radius \(5.5\) cm, draw an arc above \(BC\). With centre \(C\) and radius \(4.5\) cm, draw a second arc cutting the first at point \(A\). Join \(AB\) and \(AC\). — Reason: \(\Delta ABC\) serves as the reference triangle from which the smaller similar triangle will be derived using the division-of-a-segment technique.
  4. Step 4: Draw ray \(BX\) at an acute angle to \(BC\) on the side opposite \(A\). Mark five equally spaced points \(B_1, B_2, B_3, B_4, B_5\) on \(BX\) so that \(BB_1 = B_1B_2 = B_2B_3 = B_3B_4 = B_4B_5\). — Reason: Five equal divisions correspond to the denominator \(5\) in the ratio \(\dfrac{4}{5}\), setting up the proportional cut on \(BC\).
  5. Step 5: Join \(B_5\) to \(C\). Through \(B_4\), draw a line parallel to \(B_5C\) to meet \(BC\) at point \(M\). — Reason: By the Basic Proportionality Theorem, \(M\) divides \(BC\) such that \(BM = \dfrac{4}{5} \times BC = 4.8\) cm, giving the required base \(MN\) of \(\Delta LMN\).
  6. Step 6: Through \(M\), draw a line parallel to \(CA\) to meet \(BA\) at point \(L\). — Reason: A line through \(M\) parallel to \(CA\) ensures that \(\Delta LMN\) has the same angles as \(\Delta ABC\), guaranteeing similarity, while automatically producing \(LM = 4.4\) cm and \(LN = 3.6\) cm by the same scale factor.
  7. Step 7: Verify the constructed triangle. Measure \(MN\), \(LM\), and \(LN\) and confirm they equal \(4.8\) cm, \(4.4\) cm, and \(3.6\) cm respectively. Check that each side is exactly \(\dfrac{4}{5}\) of the corresponding side of \(\Delta ABC\). — Reason: Verification ensures that no construction error has occurred and that \(\Delta LMN \sim \Delta ABC\) in the required ratio \(4:5\).

Final Answer

\(\Delta LMN\) is constructed with sides \(MN = 4.8\) cm, \(LM = 4.4\) cm and \(LN = 3.6\) cm, similar to \(\Delta ABC\) in the ratio \(4:5\).

Common Mistake

One common mistake: Students sometimes mark only 4 points on ray \(BX\) instead of 5, forgetting that the denominator of the scale factor \(\dfrac{4}{5}\) determines the total number of equal divisions needed.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Compute sides of \( \Delta LMN \): \[MN = \dfrac{4}{5} \times 6 = 4.8 \text{ cm}, \quad LM = \dfrac{4}{5} \times 5.5 = 4.4 \text{ cm}, \quad LN = \dfrac{4}{5} \times 4.5 = 3.6 \text{ cm}\]
  2. Step 2: Construct \( \Delta ABC \): Draw \( BC = 6 \) cm. With B as centre draw arc of radius \( 5.5 \) cm; with C as centre draw arc of radius \( 4.5 \) cm. Mark intersection as A and join AB, AC.
  3. Step 3: Divide base using ray method: Draw ray BX at an acute angle to BC. Mark 5 equal divisions \( B_1, B_2, B_3, B_4, B_5 \) on BX. Join \( B_5C \). Draw \( B_4M \parallel B_5C \) to get M on BC with \( BM = \dfrac{4}{5} \times BC = 4.8 \) cm.
  4. Step 4: Complete \( \Delta LMN \): Through M draw \( ML \parallel BA \) meeting AC at L, and draw \( MN \parallel BC \) — equivalently, \( \Delta LMN \) is obtained with \( MN = 4.8 \) cm, \( LM = 4.4 \) cm, \( LN = 3.6 \) cm.

Answer: \(\Delta LMN\) is constructed with sides \(MN = 4.8\) cm, \(LM = 4.4\) cm and \(LN = 3.6\) cm, similar to \(\Delta ABC\) in the ratio \(4:5\).

➕ More Examples

More Examples

Example 1

Question: \( \Delta PQR \sim \Delta XYZ \). In \( \Delta PQR \), \( PQ = 6 \) cm, \( QR = 7 \) cm, \( PR = 5 \) cm. Construct \( \Delta PQR \) and \( \Delta XYZ \) such that \( \dfrac{QR}{YZ} = \dfrac{7}{5} \).

Solution: We are given \( \Delta PQR \sim \Delta XYZ \) with sides \( PQ = 6 \) cm, \( QR = 7 \) cm, \( PR = 5 \) cm, and the ratio \( \dfrac{QR}{YZ} = \dfrac{7}{5} \). \nSince \( \Delta PQR \sim \Delta XYZ \), all corresponding sides share the same ratio: \[ \frac{PQ}{XY} = \frac{QR}{YZ} = \frac{PR}{XZ} = \frac{7}{5} \] \nFinding each side of \( \Delta XYZ \): \nFor \( XY \): \[ \frac{PQ}{XY} = \frac{7}{5} \Rightarrow XY = \frac{PQ \times 5}{7} = \frac{6 \times 5}{7} = \frac{30}{7} \approx 4.3 \text{ cm} \] \nFor \( YZ \): \[ \frac{QR}{YZ} = \frac{7}{5} \Rightarrow YZ = \frac{7 \times 5}{7} = 5 \text{ cm} \] \nFor \( XZ \): \[ \frac{PR}{XZ} = \frac{7}{5} \Rightarrow XZ = \frac{5 \times 5}{7} = \frac{25}{7} \approx 3.6 \text{ cm} \] \nConstruction of \( \Delta PQR \): Draw segment \( QR = 7 \) cm. With centre \( Q \), draw an arc of radius 6 cm. With centre \( R \), draw an arc of radius 5 cm. Mark the intersection as \( P \). Join \( PQ \) and \( PR \). \nConstruction of \( \Delta XYZ \): Draw segment \( YZ = 5 \) cm. With centre \( Y \), draw an arc of radius \( \approx 4.3 \) cm. With centre \( Z \), draw an arc of radius \( \approx 3.6 \) cm. Mark the intersection as \( X \). Join \( XY \) and \( XZ \).

Answer: The sides of \( \Delta XYZ \) are \( XY \approx 4.3 \) cm, \( YZ = 5 \) cm, \( XZ \approx 3.6 \) cm.

Example 2

Question: \( \Delta DEF \sim \Delta STU \). In \( \Delta DEF \), \( DE = 4 \) cm, \( EF = 5 \) cm, \( DF = 6 \) cm. Construct \( \Delta DEF \) and \( \Delta STU \) such that \( \dfrac{EF}{TU} = \dfrac{2}{3} \).

Solution: We are given \( \Delta DEF \sim \Delta STU \) with sides \( DE = 4 \) cm, \( EF = 5 \) cm, \( DF = 6 \) cm, and the ratio \( \dfrac{EF}{TU} = \dfrac{2}{3} \). \nSince \( \Delta DEF \sim \Delta STU \), all corresponding sides share the same ratio: \[ \frac{DE}{ST} = \frac{EF}{TU} = \frac{DF}{SU} = \frac{2}{3} \] \nFinding each side of \( \Delta STU \): \nFor \( ST \): \[ \frac{DE}{ST} = \frac{2}{3} \Rightarrow ST = \frac{DE \times 3}{2} = \frac{4 \times 3}{2} = 6 \text{ cm} \] \nFor \( TU \): \[ \frac{EF}{TU} = \frac{2}{3} \Rightarrow TU = \frac{5 \times 3}{2} = \frac{15}{2} = 7.5 \text{ cm} \] \nFor \( SU \): \[ \frac{DF}{SU} = \frac{2}{3} \Rightarrow SU = \frac{6 \times 3}{2} = 9 \text{ cm} \] \nConstruction of \( \Delta DEF \): Draw segment \( EF = 5 \) cm. With centre \( E \), draw an arc of radius 4 cm. With centre \( F \), draw an arc of radius 6 cm. Mark the intersection as \( D \). Join \( DE \) and \( DF \). \nConstruction of \( \Delta STU \): Draw segment \( TU = 7.5 \) cm. With centre \( T \), draw an arc of radius 6 cm. With centre \( U \), draw an arc of radius 9 cm. Mark the intersection as \( S \). Join \( ST \) and \( SU \).

Answer: The sides of \( \Delta STU \) are \( ST = 6 \) cm, \( TU = 7.5 \) cm, \( SU = 9 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: \( \Delta PQR \sim \Delta XYZ \). In \( \Delta PQR \), \( PQ = 7 \) cm, \( QR = 6 \) cm, and \( PR = 5 \) cm. Construct \( \Delta PQR \) and \( \Delta XYZ \) such that \( \dfrac{QR}{YZ} = \dfrac{3}{5} \).

Solution

  1. Step 1: Understand the given ratio: We are given that \( \dfrac{QR}{YZ} = \dfrac{3}{5} \). This means \( \Delta XYZ \) is larger than \( \Delta PQR \). The sides of \( \Delta XYZ \) are in the ratio \( 5 : 3 \) compared to the corresponding sides of \( \Delta PQR \).
  2. Step 2: Find the scale factor: The scale factor from \( \Delta PQR \) to \( \Delta XYZ \) is \( \dfrac{5}{3} \). So each side of \( \Delta XYZ \) equals the corresponding side of \( \Delta PQR \) multiplied by \( \dfrac{5}{3} \).
  3. Step 3: Calculate side YZ: Corresponding to \( QR = 6 \) cm: \[ YZ = QR \times \frac{5}{3} = 6 \times \frac{5}{3} = 10 \text{ cm} \]
  4. Step 4: Calculate side XY: Corresponding to \( PQ = 7 \) cm: \[ XY = PQ \times \frac{5}{3} = 7 \times \frac{5}{3} = \frac{35}{3} \approx 11.67 \text{ cm} \]
  5. Step 5: Calculate side XZ: Corresponding to \( PR = 5 \) cm: \[ XZ = PR \times \frac{5}{3} = 5 \times \frac{5}{3} = \frac{25}{3} \approx 8.33 \text{ cm} \]
  6. Step 6: Construct the triangles: First, construct \( \Delta PQR \) with \( QR = 6 \) cm, \( PQ = 7 \) cm, and \( PR = 5 \) cm using a ruler and compass. Then, using the scale factor \( \dfrac{5}{3} \), construct \( \Delta XYZ \) with \( YZ = 10 \) cm, \( XY \approx 11.67 \) cm, and \( XZ \approx 8.33 \) cm, similar to \( \Delta PQR \).

Answer: \( \Delta XYZ \) is constructed with sides \( YZ = 10 \) cm, \( XY = \dfrac{35}{3} \approx 11.67 \) cm, and \( XZ = \dfrac{25}{3} \approx 8.33 \) cm, similar to \( \Delta PQR \) in the ratio \( 5 : 3 \).

Everything you get with Solver7

More questions in Geometric Contructions