SOLVER7 Study. Nothing Else.
2018 Board Paper Q3

Draw \(\angle PQR\) of measure \(70^\circ\) and bisect it.

MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a big slice of pie that opens up to 70 degrees. You want to cut it right down the middle so both sides are exactly equal. A special ray called an angle bisector does exactly that job. It splits the angle into two matching pieces. Each piece becomes 35 degrees, because 70 split equally into two parts gives 35 on each side. The ray QS is that perfect middle cut inside the angle PQR.

Answer: The ray \( QS \) bisects \( \angle PQR \) into two equal angles of \( 35^\circ \) each.

📖 Constructing and Bisecting an Angle of 70°

Detailed Explanation

An angle bisector is a ray that divides an angle into two equal parts. To bisect \( \angle PQR \), we use a compass to find points equidistant from both arms of the angle, then join the vertex to a point equidistant from those points. This gives us two smaller angles, each of measure \( 35^\circ \), since \( 70^\circ \div 2 = 35^\circ \). The construction relies on the property that any point on the bisector is equidistant from the two arms of the angle.

Formula Used

\[ \text{Each half of bisected angle} = \frac{\angle PQR}{2} = \frac{70^\circ}{2} = 35^\circ \]

Solution

  1. Step 1: Draw a ray \( QR \) of any convenient length using a ruler. Point \( Q \) will be the vertex of the angle.
  2. Step 2: Place the centre of the protractor at point \( Q \) and align its base line with ray \( QR \). Mark a point at \( 70^\circ \) on the protractor scale. Call this point \( P \).
  3. Step 3: Remove the protractor and join \( Q \) to \( P \) using a ruler. You now have \( \angle PQR = 70^\circ \).
  4. Step 4: With \( Q \) as the centre and any convenient radius, draw an arc that cuts ray \( QP \) at point \( A \) and ray \( QR \) at point \( B \).
  5. Step 5: With \( A \) as the centre and a radius greater than half of \( AB \), draw an arc in the interior of \( \angle PQR \). Without changing the radius, place the compass at \( B \) and draw another arc that intersects the previous arc. Let the intersection point be \( S \).
  6. Step 6: Join \( Q \) to \( S \) using a ruler and extend it. The ray \( QS \) is the required bisector of \( \angle PQR \).
  7. Step 7: Verify with a protractor: \( \angle PQS = \angle SQR = 35^\circ \), confirming that \( QS \) bisects \( \angle PQR \) correctly.

Final Answer

The ray \( QS \) bisects \( \angle PQR \) into two equal angles of \( 35^\circ \) each.

Common Mistake

A common mistake is changing the compass radius between drawing the two intersecting arcs from points \( A \) and \( B \). The radius must remain the same for both arcs; otherwise the intersection point will not lie on the true bisector, and the two halves of the angle will be unequal.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a ray QR of any convenient length with a ruler, marking Q as the vertex. — Reason: The vertex Q is where the angle will be constructed, so we begin by establishing one arm of the angle.
  2. Step 2: Place the protractor's centre exactly at Q and align its baseline along ray QR. Mark a point at \( 70^\circ \) on the protractor scale and label it P. — Reason: We need to construct \( \angle PQR = 70^\circ \) accurately before we can bisect it.
  3. Step 3: Remove the protractor and draw ray QP using a ruler, connecting Q to point P. — Reason: This completes the angle, giving us \( \angle PQR = 70^\circ \) with two clear arms: ray QP and ray QR.
  4. Step 4: Keeping Q as the centre, draw an arc of any convenient radius that crosses ray QP at a point labelled A and ray QR at a point labelled B. — Reason: Points A and B are equidistant from Q on both arms of the angle, which is the starting condition needed to locate the bisector.
  5. Step 5: With A as centre and a radius greater than half of AB, draw an arc inside \( \angle PQR \). Without adjusting the compass width, place the compass tip at B and draw a second arc that cuts the first. Mark the crossing point as S. — Reason: S is equidistant from both A and B, so it lies exactly on the angle bisector of \( \angle PQR \).
  6. Step 6: Use a ruler to join Q to S, extending the line to form ray QS. — Reason: Ray QS is the angle bisector; it divides \( \angle PQR \) into \( \angle PQS \) and \( \angle SQR \), each measuring \( 35^\circ \) since \( 70^\circ \div 2 = 35^\circ \).

Final Answer

The ray \( QS \) bisects \( \angle PQR \) into two equal angles of \( 35^\circ \) each.

Common Mistake

One common mistake: students change the compass width between drawing the two arcs in Step 5. The radius must stay the same when moving from A to B, otherwise the intersection point S will not be equidistant from both arms and the bisector will be inaccurate.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw ray \( QR \); use a protractor at \( Q \) to mark \( 70^\circ \), label that point \( P \), and join \( QP \) to form \( \angle PQR = 70^\circ \).
  2. Step 2: With \( Q \) as centre, draw an arc cutting ray \( QP \) at \( A \) and ray \( QR \) at \( B \).
  3. Step 3: With equal radius (greater than half of \( AB \)), draw arcs from \( A \) and \( B \) intersecting at point \( S \) inside \( \angle PQR \).
  4. Step 4: Join and extend \( QS \); this ray bisects \( \angle PQR \) so that \( \angle PQS = \angle SQR = 35^\circ \).

Answer: The ray \( QS \) bisects \( \angle PQR \) into two equal angles of \( 35^\circ \) each.

➕ More Examples

More Examples

Example 1

Question: Draw \( \angle ABC \) of measure \( 110^\circ \) and bisect it. What is the measure of each half after bisection? Verify your construction by measurement.

Solution: Step 1: Draw a ray \( BA \). Place a protractor at \( B \) and mark a point at \( 110^\circ \). Draw ray \( BC \) through that point, forming \( \angle ABC = 110^\circ \). Step 2: Place the compass at vertex \( B \) with any convenient radius and draw an arc that intersects both ray \( BA \) at point \( P \) and ray \( BC \) at point \( Q \). Step 3: With the same compass width, place the compass at \( P \) and draw an arc inside the angle. Without changing the width, place it at \( Q \) and draw another arc so the two arcs intersect at point \( R \). Step 4: Draw ray \( BR \). This is the bisector of \( \angle ABC \). Step 5: Measure \( \angle ABR \) and \( \angle CBR \) with a protractor. Each angle should measure: \[ \frac{110}{2} = 55^\circ \] Both \( \angle ABR = 55^\circ \) and \( \angle CBR = 55^\circ \), confirming the bisection is correct.

Answer: Each half measures \( 55^\circ \).

Example 2

Question: Draw \( \angle XYZ \) of measure \( 130^\circ \) and construct its bisector. Name the bisector ray and state the measure of each angle formed.

Solution: Step 1: Draw a ray \( YX \). Using a protractor at vertex \( Y \), mark a point at \( 130^\circ \) and draw ray \( YZ \), so that \( \angle XYZ = 130^\circ \). Step 2: With the compass at \( Y \) and a suitable radius, draw an arc cutting ray \( YX \) at \( M \) and ray \( YZ \) at \( N \). Step 3: Keeping the same compass width, draw arcs from \( M \) and from \( N \) inside the angle. Let these arcs meet at point \( T \). Step 4: Join \( Y \) to \( T \) and extend to form ray \( YT \). Ray \( YT \) is the bisector of \( \angle XYZ \). Step 5: The measure of each angle formed is: \[ \frac{130}{2} = 65^\circ \] Therefore, \( \angle XYT = 65^\circ \) and \( \angle ZYT = 65^\circ \). Measuring with a protractor confirms both angles equal \( 65^\circ \).

Answer: Each half measures \( 65^\circ \); the bisector is ray \( YT \).

🎯 Try a Similar Question

Try a Similar Question

Question: Draw \( \angle ABC \) of measure \( 110^\circ \) and bisect it using a compass and straightedge. Name the bisector ray and state the measure of each angle formed.

Solution

  1. Step 1: Draw the angle: Draw a ray \( BA \). Using a protractor, measure \( 110^\circ \) at point \( B \) and draw ray \( BC \). This forms \( \angle ABC = 110^\circ \).
  2. Step 2: Draw an arc centred at B: Place the compass at vertex \( B \) with any convenient radius and draw an arc that intersects both ray \( BA \) and ray \( BC \). Label the intersection points \( P \) (on \( BA \)) and \( Q \) (on \( BC \)).
  3. Step 3: Draw intersecting arcs from P and Q: Without changing the compass width, place the compass at point \( P \) and draw an arc inside the angle. Then place the compass at point \( Q \) and draw another arc of the same radius inside the angle. Let the two arcs intersect at point \( D \).
  4. Step 4: Draw the bisector ray: Join \( B \) to \( D \) and extend it to form ray \( BD \). This ray \( BD \) is the bisector of \( \angle ABC \).
  5. Step 5: Calculate each half-angle: Each angle formed by the bisector is: \[ \frac{110^\circ}{2} = 55^\circ \] So \( \angle ABD = \angle DBC = 55^\circ \).
  6. Step 6: Verify: Adding both halves: \[ 55^\circ + 55^\circ = 110^\circ \] This equals the original angle, confirming the bisection is correct.

Answer: The ray \( BD \) bisects \( \angle ABC \) into two equal angles of \( 55^\circ \) each.

Everything you get with Solver7

More questions in Geometric Contructions