Draw a circle with radius \(4.1\ cm.\) Construct tangents to the circle from a point at a distance \(7.3\ cm\) from the centre.
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
MAH STATE BOARD Mah SB Class 10 Maths · Geometric Contructions
Imagine a circle drawn on paper like a round coin. Now pick a spot far away from the coin. You can gently place a ruler so it just barely touches the edge of the coin — not crossing through it. Surprisingly, you can do this in exactly two ways from that same spot. Both ruler-lines end up being the same length. Here, the circle has a radius of \(4.1\ cm\) and the outside point is \(7.3\ cm\) away from the centre, giving each touching line a length of about \(6.04\ cm\).
Answer: Two tangents \(PA\) and \(PB\) are constructed from point \(P\) to the circle, each of length approximately \(6.04\ cm\).
A tangent to a circle is a straight line that touches the circle at exactly one point. From any external point, exactly two tangents can be drawn to a circle, and both tangents are equal in length. The key idea behind this construction is a very important geometric fact: the tangent at any point of a circle is perpendicular to the radius at the point of contact. So if we can find the points on the circle where the radius makes a right angle with the line joining the external point, we get the tangents. To locate these points, we use the property that the angle in a semicircle is a right angle. Therefore, if we draw a circle with the segment joining the centre and the external point as diameter, it will cut the given circle at exactly the two points of contact.
Length of tangent from external point \(= \sqrt{d^2 - r^2}\), where \(d\) is the distance from the centre and \(r\) is the radius.
Two tangents \(PA\) and \(PB\) are constructed from point \(P\) to the circle, each of length approximately \(6.04\ cm\).
A very common mistake is to take the midpoint \(M\) of \(OP\) incorrectly or to draw the second circle with the wrong radius. Remember: the second circle must have \(OP\) as its diameter, so its radius equals half of \(OP\), i.e. \(3.65\ cm\), not \(7.3\ cm\).
Two tangents \(PA\) and \(PB\) are constructed from point \(P\) to the circle, each of length approximately \(6.04\ cm\).
One common mistake: Students sometimes draw the auxiliary circle with radius equal to \(OP\) instead of half of \(OP\) (i.e., \(MP\)), which means the auxiliary circle does not have \(OP\) as its diameter and the right-angle property at the intersection points no longer holds.
Answer: Two tangents \(PA\) and \(PB\) are constructed from point \(P\) to the circle, each of length approximately \(6.04\ cm\).
Question: Draw a circle of radius \( 3.5 \text{ cm} \). Construct tangents to this circle from an external point situated at a distance of \( 6.5 \text{ cm} \) from the centre. Also find the length of each tangent.
Solution: Given: radius \( r = 3.5 \text{ cm} \), distance from external point to centre \( d = 6.5 \text{ cm} \). \nConstruction steps: \nStep 1: Draw a circle with centre O and radius \( r = 3.5 \text{ cm} \). \nStep 2: Mark the external point P such that \( OP = 6.5 \text{ cm} \). \nStep 3: Find the midpoint M of segment OP, so \( OM = MP = 3.25 \text{ cm} \). \nStep 4: Draw a circle with centre M and radius \( 3.25 \text{ cm} \). This circle passes through both O and P. \nStep 5: Mark the points T1 and T2 where this new circle intersects the original circle. \nStep 6: Join PT1 and PT2. These are the required tangents (since \( \angle OT_1P = 90° \) and \( \angle OT_2P = 90° \), as the angle in a semicircle is \( 90\circ \)). \nVerification of tangent length: Using the Pythagorean theorem in triangle \( OT_1P \): \[ PT_1 = \sqrt{OP^2 - OT_1^2} \] Substituting the values: \[ PT_1 = \sqrt{(6.5)^2 - (3.5)^2} \] \[ PT_1 = \sqrt{42.25 - 12.25} \] \[ PT_1 = \sqrt{30} \] \[ PT_1 \approx 5.48 \text{ cm} \]
Answer: Each tangent has length \( \sqrt{30} \approx 5.48 \text{ cm} \).
Question: A circle has its centre at point O with radius \( 5 \text{ cm} \). An external point Q is located \( 13 \text{ cm} \) from O. Construct the two tangents from Q to the circle and calculate their length.
Solution: Given: radius \( r = 5 \text{ cm} \), distance from external point to centre \( d = 13 \text{ cm} \). \nConstruction steps: \nStep 1: Draw a circle with centre O and radius \( r = 5 \text{ cm} \). \nStep 2: Mark the external point Q such that \( OQ = 13 \text{ cm} \). \nStep 3: Find the midpoint M of OQ, so \( OM = MQ = 6.5 \text{ cm} \). \nStep 4: With M as centre and radius \( 6.5 \text{ cm} \), draw another circle. This auxiliary circle passes through O and Q. \nStep 5: Let the auxiliary circle intersect the original circle at points T1 and T2. \nStep 6: Join QT1 and QT2. These are the two required tangents. The angle \( \angle OT_1Q = 90\circ \) (angle in a semicircle), confirming that \( OT_1 \perp QT_1 \), i.e., QT1 is indeed a tangent. \nCalculation of tangent length: In right triangle \( OT_1Q \): \[ QT_1 = \sqrt{OQ^2 - OT_1^2} \] Substituting the values: \[ QT_1 = \sqrt{(13)^2 - (5)^2} \] \[ QT_1 = \sqrt{169 - 25} \] \[ QT_1 = \sqrt{144} \] \[ QT_1 = 12 \text{ cm} \]
Answer: Each tangent has length \( 12 \text{ cm} \).
Question: Draw a circle of radius 3.5 cm. Construct tangents to the circle from an external point P which is at a distance of 8.5 cm from the centre O. Also find the length of each tangent.
Answer: Two tangents PA and PB are constructed from external point P to the circle, each of length approximately \( 7.75 \) cm.