SOLVER7 Study. Nothing Else.
Figure It Out 6 Q4(ii)

Observe this triangle. Recreate this on an isometric grid.

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine stacking tiny building blocks to make a triangle shape, like a pretzel made of cubes. Special dot paper helps us draw those blocks so they look real and three-dimensional. Each little cube shows three faces: a top face, a left face, and a right face. We colour each face a different shade so the cube does not look flat. By placing many such cubes side by side along three arms, the whole triangle appears just like the picture.

Answer: By using isometric dot paper, drawing each small cube with a rhombus top face and two vertical side faces, joining the cubes along the three arms of the triangle, and finally shading the top, left and right faces in three different tones, you recreate the cube-triangle exactly as shown in the picture.

📖 Recreating the Impossible Triangle on an Isometric Grid

Detailed Explanation

The figure shown is made up of many small cubes arranged to look like a triangle (this is the famous 'impossible triangle' or Penrose triangle). To draw 3-D shapes like cubes on flat paper, we use an isometric grid. An isometric grid is a grid made of dots or lines arranged in the shape of equilateral triangles. In such a grid, three directions are used: one set of lines goes vertically (up-down), and two sets go slanting at \( 30^\circ \) from the horizontal (like the sides of the cubes). Because a cube has length, breadth and height, we show these three edges along the three directions of the isometric grid. Each small cube becomes a hexagon-like shape showing three visible faces: the top face, the left face and the right face. By copying the cubes one by one, following the arrangement in the picture, we can recreate the whole triangle.

Formula Used

A single cube on an isometric grid is drawn using three edges of equal length along the three grid directions: one vertical edge and two slanting edges (each slanting edge makes about \( 30^\circ \) with the horizontal). Three faces are visible: top, left and right.

Solution

  1. Step 1: Understand the isometric grid: Take isometric dot paper. Notice the dots form equilateral triangles. This gives three natural directions: straight up (vertical), up-and-right slanting, and up-and-left slanting. All edges of a cube are drawn equal in length along these three directions so the cube looks correct in 3-D.
  2. Step 2: Learn to draw one cube: First draw one single cube. Start by drawing the top face as a rhombus (using the two slanting directions). Then drop three vertical edges downward from the front corners. Join them to complete the left face and the right face. Now you can see three faces: top, left, right. This is the basic building block for the whole figure.
  3. Step 3: Count and study the cubes in the picture: Look carefully at the image. The triangle is built from small cubes joined edge to edge along three arms: the top arm going across, the left arm going down, and the slanting arm. Each arm is a straight row of stacked cubes. Note how the cubes turn at the corners so the shape looks like a closed triangle.
  4. Step 4: Draw the first arm: On the isometric grid, draw the top row of cubes one after another, sharing faces so no gaps are left. Since neighbouring cubes share a face, you only need to add the new visible edges for each next cube instead of redrawing full cubes.
  5. Step 5: Draw the second and third arms: From the corner of the top arm, continue drawing cubes downward for the vertical arm, and then along the slanting direction for the third arm. Keep every edge parallel to one of the three grid directions. This keeps all cubes the same size and correctly aligned.
  6. Step 6: Shade the faces to show depth: To make the drawing look three-dimensional like the given figure, shade the three types of faces with three different tones: keep the top faces lightest, the right faces medium, and the left faces darkest. Consistent shading makes the solid look real and clear.

Final Answer

By using isometric dot paper, drawing each small cube with a rhombus top face and two vertical side faces, joining the cubes along the three arms of the triangle, and finally shading the top, left and right faces in three different tones, you recreate the cube-triangle exactly as shown in the picture.

Common Mistake

A very common mistake is drawing the cube edges at wrong angles or making them unequal in length, so the cubes look stretched or crooked. Always draw the slanting edges along the grid's \( 30^\circ \) lines and keep every edge equal in length, using the isometric grid lines as a guide.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Get isometric dot paper and study its dot pattern. You will notice that every set of three neighbouring dots forms an equilateral triangle. This naturally gives you three drawing directions: straight up (vertical), slanting up-and-to-the-right, and slanting up-and-to-the-left, each slanting direction making \( 30^\circ \) with the horizontal. — Reason: These three directions match exactly the three edges (length, breadth, height) of a real cube, so anything drawn along them will look correctly three-dimensional.
  2. Step 2: Practice drawing a single small cube on the isometric paper. Start at one dot, draw one vertical edge upward, then draw two slanting edges of equal length from the same starting point — one going up-and-right and one going up-and-left. Complete the rhombus-shaped top face and the two parallelogram-shaped side faces by adding the remaining edges parallel to the first ones. — Reason: A cube has all edges equal, so keeping every edge the same grid-unit length ensures the cube looks proportionate and realistic.
  3. Step 3: Shade the three visible faces of your practice cube with three noticeably different tones — for example, light grey for the top face, medium grey for the right face, and dark grey for the left face. — Reason: Shading the faces differently creates the illusion of light falling on the cube from one direction, which strengthens the 3-D effect and makes individual cubes easy to distinguish when many are placed together.
  4. Step 4: Look carefully at the picture of the cube-triangle. Identify its three arms: the arm going to the upper-left, the arm going to the upper-right, and the arm going downward. Count how many small cubes are arranged along each arm. — Reason: Understanding the layout before drawing prevents misplacement of cubes and ensures the finished figure matches the original picture.
  5. Step 5: Begin drawing the cubes arm by arm. For each arm, place the cubes one beside the other along the correct isometric direction, making sure each new cube shares one face (and therefore one set of edges) with the cube next to it. — Reason: Sharing edges between adjacent cubes keeps the arrangement compact and seamless, just like real cubes stacked together.
  6. Step 6: Join the three arms at their corners to close the triangular shape, taking care that the cubes at the corners connect smoothly in all three isometric directions. — Reason: The corners are the trickiest part of the cube-triangle; correct connection at the corners is what creates the famous 'impossible triangle' optical illusion.
  7. Step 7: Apply the same three-tone shading scheme consistently to every cube across the entire figure — the same tone always on the top face, the same tone always on the left face, and the same tone always on the right face. — Reason: Consistent shading across all cubes unifies the drawing and makes the whole structure look like one solid, believable 3-D object rather than a collection of separate shapes.

Final Answer

By using isometric dot paper, drawing each small cube with a rhombus top face and two vertical side faces, joining the cubes along the three arms of the triangle, and finally shading the top, left and right faces in three different tones, you recreate the cube-triangle exactly as shown in the picture.

Common Mistake

One common mistake: drawing the edges of each cube in random directions instead of strictly along the three isometric grid directions, which makes the cubes look distorted and destroys the 3-D illusion.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Use isometric dot paper; identify three grid directions: vertical, slant-right, slant-left, each at \( 30^\circ \) from horizontal.
  2. Step 2: Draw each small cube showing three faces: rhombus-shaped top, left side, right side — all edges equal in length.
  3. Step 3: Join cubes along all three arms of the triangular arrangement, replicating the picture exactly.
  4. Step 4: Shade top, left, and right faces in three distinct tones to complete the 3-D cube-triangle.

Answer: By using isometric dot paper, drawing each small cube with a rhombus top face and two vertical side faces, joining the cubes along the three arms of the triangle, and finally shading the top, left and right faces in three different tones, you recreate the cube-triangle exactly as shown in the picture.

➕ More Examples

More Examples

Example 1

Question: On an isometric grid, a quadrilateral (rhombus) has its four vertices placed as follows: start at dot A, move 4 grid units to the right to reach B, then move 3 grid units along the upper-right diagonal to reach C, then move 4 grid units to the left to reach D, and finally join D back to A. Recreate this rhombus on a fresh isometric grid and state the length of each side in grid units.

Solution: On an isometric grid, every small triangle has sides of 1 grid unit. We follow the given directions to plot each vertex. Vertex A: Choose a starting dot on the isometric grid and label it A. Vertex B: From A, count 4 grid units along the horizontal (right) direction and mark dot B. So side AB spans 4 grid units. Vertex C: From B, count 3 grid units along the upper-right diagonal direction and mark dot C. So side BC spans 3 grid units. Vertex D: From C, count 4 grid units to the left (horizontal) and mark dot D. So side CD spans 4 grid units. Close the shape: Join D back to A. Since the grid is isometric (equilateral triangles), the path from D to A also runs 3 grid units along the lower-left diagonal, giving side DA = 3 grid units. Now check the shape: AB = CD = 4 grid units and BC = DA = 3 grid units. Opposite sides are equal, confirming it is a parallelogram (and since all angles in an isometric grid are multiples of 60°, the interior angles are 60° and 120°, making it a parallelogram on the isometric grid). Perimeter of the shape: The perimeter is calculated as follows. Since AB = CD = 4 and BC = DA = 3, \[P = 4 + 3 + 4 + 3 = 14 \text{ grid units}\] Recreation steps on the blank isometric grid: 1. Mark dot A on the grid. 2. Move 4 units right — mark B. 3. Move 3 units upper-right diagonal — mark C. 4. Move 4 units left — mark D. 5. Join D to A (3 units lower-left diagonal). 6. Connect A-B, B-C, C-D, D-A with straight lines.

Answer: The recreated shape is a parallelogram on the isometric grid with AB = CD = 4 grid units, BC = DA = 3 grid units, and perimeter = 14 grid units.

Example 2

Question: On an isometric grid, a triangle has its three vertices at the following positions: Vertex P is at a chosen starting dot. From P, move 5 grid units along the horizontal direction to reach vertex Q. From P, move 5 grid units along the upper-right diagonal direction to reach vertex R. Recreate this triangle on a blank isometric grid. Is the triangle equilateral? Justify your answer and find the perimeter in grid units.

Solution: On an isometric grid, the dots are arranged so that the three directions (horizontal-right, upper-right diagonal, and upper-left diagonal) are all at 60° to each other, and every unit step is the same length. Step 1 — Plot the vertices. Vertex P: Mark a convenient dot on the isometric grid as P. Vertex Q: From P, count 5 grid units along the horizontal (right) direction and mark Q. So PQ = 5 grid units. Vertex R: From P, count 5 grid units along the upper-right diagonal direction (at 60° to the horizontal) and mark R. So PR = 5 grid units. Step 2 — Find QR. On an isometric grid, when PQ is 5 units along the horizontal and PR is 5 units along the upper-right diagonal (both starting from the same point P), the third side QR connects Q to R. By the geometry of the isometric grid, the vector from Q to R is the same as the vector from P to R minus the vector from P to Q. In isometric grid coordinates (using the two basis directions), P = (0, 0), Q = (5, 0), R = (0, 5) in grid steps (horizontal and upper-right). The distance from Q = (5, 0) to R = (0, 5): the displacement is (−5 steps horizontal) + (5 steps upper-right diagonal). On an isometric grid this displacement is equivalent to 5 steps along the upper-left diagonal direction, and each diagonal step is also 1 grid unit. So QR = 5 grid units. Step 3 — Classify the triangle. We have PQ = PR = QR = 5 grid units. All three sides are equal, so the triangle is equilateral. This makes sense because on an isometric grid, taking equal steps along any two of the three standard directions from the same point always produces an equilateral triangle. Step 4 — Perimeter. \[\text{Perimeter} = PQ + QR + RP = 5 + 5 + 5 = 15 \text{ grid units}\] Step 5 — Recreate on the blank grid. 1. Mark dot P. 2. Count 5 units horizontally to the right — mark Q. 3. Return to P, count 5 units along the upper-right diagonal — mark R. 4. Join P to Q, Q to R, and R to P with straight lines. 5. Each interior angle of the triangle is \( 60^\circ \), consistent with an equilateral triangle on the isometric grid.

Answer: The recreated triangle PQR is equilateral with PQ = QR = RP = 5 grid units and perimeter = 15 grid units.

🎯 Try a Similar Question

Try a Similar Question

Question: On an isometric dot paper, draw a staircase structure that has 3 steps. The bottom step is made of a row of 3 unit cubes, the middle step is made of a row of 2 unit cubes placed on top of the left 2 cubes of the bottom row, and the top step is a single unit cube placed on top of the left cube of the middle row. Shade the top face, the left face, and the right face of each visible cube in three different tones to show depth. How many unit cubes are used in total, and describe the steps to draw this structure on isometric dot paper.

Solution

  1. Step 1 – Count the total unit cubes: The bottom row has 3 unit cubes, the middle row has 2 unit cubes, and the top row has 1 unit cube. Total number of unit cubes = 3 + 2 + 1 = 6.
  2. Step 2 – Set up the isometric dot paper: Place your isometric dot paper so that the dots form a triangular grid. The dots are equally spaced at 60° angles. Each unit cube will occupy one 'cell' of this grid, drawn using three rhombus shapes meeting at a top vertex.
  3. Step 3 – Draw the bottom row of 3 cubes: Start at a convenient dot near the bottom-centre of the paper. Draw the first unit cube: from the top vertex, draw two lines going down-left and down-right at 30° to the horizontal (each one unit long), then close the rhombus top face. From the bottom-left vertex of the top face draw a vertical line one unit down, and from the bottom-right vertex draw another vertical line one unit down. Connect these two bottom points with a horizontal line to complete the front face. Repeat this process, placing the second cube immediately to the right of the first, and the third cube immediately to the right of the second, so all three share side faces.
  4. Step 4 – Draw the middle row of 2 cubes on top of the left 2 cubes: Identify the top-left vertex of the leftmost cube in the bottom row. From this point, draw the first cube of the middle row in the same way as in Step 3. Place the second middle-row cube immediately to the right of the first. Each middle-row cube sits directly on top of a bottom-row cube, so the bottom rhombus of a middle-row cube coincides with the top rhombus of the corresponding bottom-row cube — you do not need to redraw that shared face.
  5. Step 5 – Draw the top single cube: Identify the top-left vertex of the leftmost cube in the middle row. Draw one unit cube above it in the same manner. This single cube forms the topmost step of the staircase.
  6. Step 6 – Shade the three visible faces: Each unit cube has three visible faces: the top rhombus face, the left rhombus face, and the right rhombus face. Use the lightest shade (or leave white) for the top face, a medium shade for the left face, and the darkest shade for the right face. Apply this shading consistently to all 6 cubes so that the structure looks three-dimensional. Hidden faces (shared between two adjacent cubes or resting on the 'ground') are not drawn or shaded.
  7. Step 7 – Verify the staircase shape: Step back and check: the finished drawing should show a staircase outline rising from right to left — 3 cubes at the base level, 2 cubes at the next level, and 1 cube at the top level, giving a total of 6 unit cubes. The three-tone shading creates the illusion of a solid 3-D staircase structure.

Answer: The staircase structure uses 6 unit cubes in total (3 + 2 + 1). On isometric dot paper, draw each cube as three rhombus faces meeting at a top vertex; build the bottom row of 3 cubes first, then the middle row of 2 cubes on top of the left two, and finally 1 cube on top of the leftmost middle cube. Shade the top face in the lightest tone, the left face in a medium tone, and the right face in the darkest tone for all 6 cubes to produce a realistic 3-D staircase drawing.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes