SOLVER7 Study. Nothing Else.
Figure It Out 6 Q3

Is there anything strange about the path of this ball\(?\) Recreate it on the isometric grid. [Hint: Consider a portion of this figure that is physically realisable and identify the \(3\) primary directions.]

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine climbing a staircase that secretly tricks you into thinking you end up where you started, but you are actually higher up. This drawing of cubes does the same thing. Each small part looks totally normal and real. But when you follow the whole path all the way around, something impossible happens: you go up and up, yet somehow land back at the same spot. It is like a magic trick drawn on paper. The full loop can never be built as a real object because it cheats with height.

Answer: Yes, the path is strange: it is an impossible figure (an optical illusion). Although the drawing uses the three correct isometric directions locally, the full loop cannot be built as a real solid because the two ends would have to be at the same height and at different heights at once. Only a portion of the figure is physically realisable, and when recreated honestly on the isometric grid, the path does not close up.

📖 The Impossible Ball Path on an Isometric Grid

Detailed Explanation

This picture is drawn on an isometric grid. In a true isometric drawing of a solid, every edge points along one of exactly three primary directions. Look at the cubes: one direction goes up-and-to-the-right, a second goes up-and-to-the-left, and the third goes straight up (vertical). Every real face and every real cube must be built using only these three directions. The strange thing here is that the red ball and the blue ball appear to sit on the SAME flat layer of cubes, yet if you follow the little arrows step by step, the path seems to climb higher and higher and still return to the same level. This is an optical illusion, similar to the famous 'impossible staircase'. When you actually try to redraw the whole path honestly on an isometric grid, using only the three allowed directions, you find that the two ends cannot meet at the same height. Only a portion of the figure is physically realisable; the full loop is not. So yes, there is definitely something strange: the figure is an impossible object that cannot exist as a real solid.

Formula Used

There is no numerical formula. The key rule of an isometric drawing is: every edge must lie along exactly one of the 3 primary directions \( \rightarrow \) up-right, up-left, and vertical (straight up).

Solution

  1. Step 1: Identify the 3 primary directions: On the isometric grid, mark the three directions that all cube edges follow. Direction 1 goes up-and-to-the-right, Direction 2 goes up-and-to-the-left, and Direction 3 goes straight up (vertical). In a genuine solid, every arrow on the ball's path must be one of these three.
  2. Step 2: Read the arrows on the path: Start at the red ball and carefully follow each arrow. Some arrows point 'forward' along a flat top face (up-right or up-left), while some arrows point straight upward, meaning the ball climbs to a higher cube. Count how many times the path is shown going up versus how many times it comes down.
  3. Step 3: Track the height: Give the starting cube a height of \( 0 \). Each time the path uses a vertical (up) step, add \( 1 \) to the height. As you trace the arrows, the height keeps increasing: \( 0 \rightarrow 1 \rightarrow 2 \rightarrow 3 \) and so on, but there are no matching downward steps to bring it back.
  4. Step 4: Compare the two ends: The drawing makes the red ball and the blue ball look as if they rest on the same flat layer, so their heights should be equal. But from Step 3, the honest count of up-steps gives the blue end a greater height than the red end. Two equal heights that are also unequal is a contradiction, so the solid cannot really exist.
  5. Step 5: Recreate only the realisable portion: On your own isometric grid, redraw the cubes one by one using ONLY the three primary directions. Draw the part starting from the red ball as far as you honestly can. You will be able to complete a large L-shaped portion of the cubes, but when you try to close the loop back to the blue ball at the same level, the last cube refuses to connect at the correct height. That gap is the proof of the illusion.

Final Answer

Yes, the path is strange: it is an impossible figure (an optical illusion). Although the drawing uses the three correct isometric directions locally, the full loop cannot be built as a real solid because the two ends would have to be at the same height and at different heights at once. Only a portion of the figure is physically realisable, and when recreated honestly on the isometric grid, the path does not close up.

Common Mistake

A common mistake is to assume the whole picture must be a real solid and to force the path to close up, ignoring that the height keeps increasing. Always track the vertical (up) steps carefully and use only the three primary directions; then the impossibility becomes clear.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Locate the three primary directions on the isometric grid: Direction 1 goes up-and-to-the-right, Direction 2 goes up-and-to-the-left, and Direction 3 goes straight up (vertical). — Reason: Every edge of every cube in a valid isometric drawing must follow one of these three directions. Checking this first helps you judge whether the figure is physically possible.
  2. Step 2: Observe where the red ball and the blue ball are placed in the picture. Both appear to sit on the same flat layer of cubes, meaning they should be at the same height. — Reason: If a closed loop of cubes is physically real, the starting point and ending point of any path around the loop must be at the same vertical level.
  3. Step 3: Follow the small arrows in the figure, step by step, tracing the path from one ball to the other. At each step, note which of the three directions the path takes and whether each move goes up or down. — Reason: Tracking every individual move tells you the net change in height around the full loop.
  4. Step 4: Add up the net vertical change. The arrows show the path continuously climbing higher, yet the loop appears to close back at the original level. These two facts contradict each other: the total height gained is not zero, even though the start and end look identical. — Reason: In a real solid, the net vertical displacement around any closed loop must equal zero. A nonzero net change means the loop is physically impossible.
  5. Step 5: Compare this figure with the well-known impossible staircase (Penrose staircase). Both use locally correct geometry — each small piece looks fine on its own — but the full closed loop violates the global constraint that height must return to its starting value. — Reason: This comparison shows that the illusion works because our eyes accept each local step as valid without checking the overall consistency.
  6. Step 6: Attempt to redraw the entire path honestly on an isometric grid, using only the three allowed directions and keeping an accurate count of height at every step. You will find that when you reach what should be the closing point of the loop, the path ends at a different height from where it started, so the two ends do not meet. — Reason: An honest redrawing reveals the impossibility that the original drawing hides through clever visual presentation.
  7. Step 7: Conclude: only a portion of the figure can be physically built as a real solid. The full closed loop cannot exist because it would require the same point to be at two different heights simultaneously — a physical contradiction. — Reason: This is the defining characteristic of an impossible figure (optical illusion): it is locally consistent but globally inconsistent.

Final Answer

Yes, the path is strange: it is an impossible figure (an optical illusion). Although the drawing uses the three correct isometric directions locally, the full loop cannot be built as a real solid because the two ends would have to be at the same height and at different heights at once. Only a portion of the figure is physically realisable, and when recreated honestly on the isometric grid, the path does not close up.

Common Mistake

One common mistake: students accept each small section of the figure as valid and conclude the whole figure is possible, without checking whether the net vertical change around the entire closed loop adds up to zero — which it must for any real 3-D solid.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Three allowed isometric directions: up-and-to-the-right, up-and-to-the-left, straight up (vertical).
  2. Step 2: Tracing the looped path step by step: each local segment obeys the 3 directions, yet the cumulative height after one full loop \( \ne 0 \).
  3. Step 3: Honest redraw on isometric grid shows the two endpoints cannot meet — the loop forces the same point to be simultaneously at two different heights: a contradiction.

Answer: Yes, the path is strange: it is an impossible figure (an optical illusion). Although the drawing uses the three correct isometric directions locally, the full loop cannot be built as a real solid because the two ends would have to be at the same height and at different heights at once. Only a portion of the figure is physically realisable, and when recreated honestly on the isometric grid, the path does not close up.

➕ More Examples

More Examples

Example 1

Question: Look at the path of a marble rolling across the faces of a cuboid as drawn on an isometric dot grid. The path has four segments. Three of the segments run along the three primary isometric directions (top-left to bottom-right, top-right to bottom-left, and straight up-down). The fourth segment runs horizontally — perfectly left to right — which does NOT match any of the three isometric directions. (a) What is strange about this path? (b) Identify which segment is impossible and explain why. (c) Redraw (describe) a corrected version of the path that is physically realisable, using only the three isometric directions.

Solution: Step 1: Recall the three primary directions on an isometric grid.\nOn an isometric grid, the three allowed directions are:\nDirection 1 — straight vertical (up-down).\nDirection 2 — slanting at \( 60^\circ \) to the left (top-right to bottom-left).\nDirection 3 — slanting at \( 60^\circ \) to the right (top-left to bottom-right).\nNo segment can run perfectly horizontal (left to right at \( 0^\circ \)) because that does not correspond to any edge of a 3D cuboid drawn on an isometric grid. \nStep 2: Identify the strange segment.\nThe fourth segment runs purely horizontally (left to right). This is the impossible segment. On an isometric grid, a horizontal line does not represent a real edge of a 3D object; it would imply movement in a direction that is not one of the three spatial axes. \nStep 3: Why is it physically unrealisable?\nA ball rolling on the surface of a cuboid can only travel along edges or face-diagonals that correspond to the three isometric axes. A perfectly horizontal segment on an isometric drawing has no physical counterpart on any face of the cuboid. It is geometrically inconsistent with the 3D structure. \nStep 4: Corrected path description.\nReplace the horizontal segment with a segment along one of the three valid isometric directions. For example, if the ball needs to move 'across', replace the horizontal segment with a segment slanting at \( 60^\circ \) to the right (Direction 3). The remaining three segments (already in valid directions) are kept unchanged. The corrected four-segment path now lies entirely along the three primary isometric directions and represents a physically realisable journey of the marble across the faces of the cuboid.

Answer: The fourth segment (the perfectly horizontal one) is strange and physically unrealisable because it does not align with any of the three primary isometric directions. The corrected path replaces that segment with one slanting at 60° (Direction 3), making the entire path physically realisable on the cuboid.

Example 2

Question: A toy car's path is drawn on an isometric grid showing the top and two side faces of a cube. The path consists of five segments. Four segments follow the three isometric directions correctly. However, one segment slopes at \( 45^\circ \) (diagonal of a square on the flat page), which is not one of the three isometric primary directions. (a) Is there anything strange about this path? Explain. (b) Which segment is not physically realisable and why? (c) On a fresh isometric grid, describe how you would redraw that segment so the whole path becomes physically valid.

Solution: Step 1: Identify the three primary isometric directions.\nWhen a cube is drawn on an isometric grid, its edges appear in exactly three directions:\nDirection A — vertical lines (straight up and down).\nDirection B — lines slanting up-right at \( 60^\circ \) from horizontal.\nDirection C — lines slanting up-left at \( 60^\circ \) from horizontal.\nAny segment on such a drawing that represents a real edge or path on the cube's surface must lie along one of these three directions. \nStep 2: Check each segment.\nFour of the five segments lie along Directions A, B, or C — these are fine.\nThe fifth segment slopes at \( 45^\circ \) on the page. The angle \( 45^\circ \) is not \( 60^\circ \) or \( 90^\circ \), so this segment does not correspond to Direction A, B, or C. \nStep 3: Why is the \( 45^\circ \) segment unrealisable?\nA \( 45^\circ \) line on an isometric grid is not parallel to any edge of the drawn cube. It cannot represent the toy car travelling along any face or edge of the cube. In 3D space, such a direction would require the car to simultaneously move along two axes in equal measure in a way that is not possible on a single flat face of the cube. Hence this segment is physically strange and impossible. \nStep 4: How to correct it.\nIdentify where the \( 45^\circ \) segment starts and ends on the isometric dot grid. Replace it with a two-part path: first a segment along Direction B (slanting up-right at \( 60^\circ \)) to an intermediate dot, then a segment along Direction C (slanting up-left at \( 60^\circ \)) from that intermediate dot to the end point. This broken replacement follows only valid isometric directions and represents the toy car going over an edge from one face to an adjacent face of the cube — a physically realisable move.\nThe overall path is now corrected and can be recreated on the isometric grid using only Directions A, B, and C.

Answer: Yes, the path is strange. The segment sloping at 45° on the isometric grid does not match any of the three primary isometric directions (vertical, 60° up-right, 60° up-left) and is therefore physically unrealisable. It should be replaced by two connected segments along valid isometric directions (for example, one along Direction B then one along Direction C) to make the entire path realisable on the cube's surface.

🎯 Try a Similar Question

Try a Similar Question

Question: A toy train track is drawn on an isometric dot grid. The track appears to form a closed triangular loop, and at first glance it looks like a realistic 3D rail circuit. However, when you carefully trace the path and record the number of steps taken in each of the three isometric directions (let us call them direction A, direction B, and direction C), you find the following counts for the complete loop: Direction A: 4 steps forward, 2 steps backward (net: +2) Direction B: 3 steps forward, 3 steps backward (net: 0) Direction C: 1 step forward, 3 steps backward (net: -2) (i) Is this train track a physically realisable closed loop? Give a reason. (ii) For a path to be a genuine closed loop on an isometric grid, what must be true about the net steps in each of the three principal directions? (iii) Identify which directions have an imbalance and state what correction (how many extra steps in which direction) would be needed in directions A and C to make the loop physically realisable.

Solution

  1. Step 1: Understand the isometric grid rule for closed loops: On an isometric grid, any genuine closed 3D path must return to exactly its starting point. This means the net displacement in each of the three principal directions must be zero. In other words, for directions A, B, and C, we need: net steps in A = 0, net steps in B = 0, and net steps in C = 0.
  2. Step 2: Calculate the net steps in each direction: From the given data: Direction A: forward steps = 4, backward steps = 2, so net = \( 4 - 2 = +2 \) Direction B: forward steps = 3, backward steps = 3, so net = \( 3 - 3 = 0 \) Direction C: forward steps = 1, backward steps = 3, so net = \( 1 - 3 = -2 \)
  3. Step 3: Check which directions are balanced: Direction B has a net of 0, so it is balanced. Direction A has a net of \( +2 \) (not zero) and Direction C has a net of \( -2 \) (not zero). Since not all three principal directions have a net of zero, the loop does NOT satisfy the condition for a physically realisable closed path.
  4. Step 4: Answer part (i) — Is the track physically realisable?: No, the train track is NOT a physically realisable closed loop. The net displacement in direction A is \( +2 \) and in direction C is \( -2 \), which means the path does not return to its starting point in those directions. The drawing is an impossible (illusory) figure — it looks closed on paper but cannot be built as a real 3D track.
  5. Step 5: Answer part (ii) — Condition for a genuine closed loop: For a path to be a genuine closed loop on an isometric grid, the net number of steps in each of the three principal directions must equal zero. That is, for every step taken in one direction, there must be an equal number of steps taken in the opposite direction along the same axis. This ensures the path truly returns to its starting point.
  6. Step 6: Answer part (iii) — Corrections needed: Direction A has a net of \( +2 \), meaning it has 2 extra forward steps. To balance it, we need 2 more backward steps in direction A (or equivalently remove 2 forward steps). Direction C has a net of \( -2 \), meaning it has 2 extra backward steps. To balance it, we need 2 more forward steps in direction C (or equivalently remove 2 backward steps). Direction B is already balanced with a net of 0, so no correction is needed there.

Answer: The train track is NOT a physically realisable closed loop because the net steps are: Direction A = \( +2 \), Direction B = \( 0 \), Direction C = \( -2 \). Only Direction B is balanced. For a genuine closed isometric loop, the net steps in ALL three principal directions must each equal zero. To correct the imbalance: add 2 backward steps in Direction A (to make its net 0) and add 2 forward steps in Direction C (to make its net 0). The figure as drawn is an impossible (illusory) shape.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes