SOLVER7 Study. Nothing Else.
Figure It Out 3 Q1(iii)

Which of the following are the nets of a cube\(?\) First, try to answer by visualisation. Then, you may use cutouts and try.

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine cutting out six squares from paper and folding them into a box. All six squares must wrap around perfectly — no gaps, no overlapping. Figure (iii) arranges the squares like a staircase going diagonally. When you try to fold that staircase, two squares bump into each other and one face is left uncovered. It is like trying to wrap a gift box but the paper folds over itself on one side and misses another side completely. So this staircase shape simply cannot become a cube.

Answer: Figure (iii) is NOT a net of a cube. It has 6 squares, but the staircase arrangement causes an overlap and leaves one face open when folded, so it does not form a closed cube.

📖 Net of a Cube (Figure iii)

Detailed Explanation

A cube has 6 square faces. A net is a flat, unfolded shape that folds up to form a solid. So any net of a cube must have exactly 6 equal squares, and these squares must be arranged so that when we fold along the edges, each square becomes a different face of the cube without any two squares overlapping and without leaving any face empty. In the given figure (iii), the squares are arranged in a stair or zig-zag pattern: a small group of squares steps down to another group. We must count the squares and mentally fold them to see if they wrap neatly around to make a closed box.

Formula Used

A valid net of a cube must have exactly 6 equal squares, and on folding it must give 6 faces (top, bottom, 4 sides) with no overlap and no gap.

Solution

  1. Step 1: Count the squares: First check the basic requirement. A cube has 6 faces, so the net must contain exactly 6 equal squares. Count the squares in figure (iii). It shows a staircase-like arrangement made up of 6 equal squares, so the count condition is satisfied. If the number of squares were not 6, it could never be a cube's net.
  2. Step 2: Understand the arrangement: In figure (iii) the squares are placed in a stepped (zig-zag) pattern: two squares on top, then the row shifts across for the next squares, and again shifts for the last squares. This is like a diagonal staircase rather than a simple straight strip.
  3. Step 3: Mentally fold the net: Pick one square as the bottom face. Fold the neighbouring squares upward to form the four side walls, and fold the last square over to form the top. In a correct net, doing this covers all 6 faces exactly once. In this staircase arrangement, when you fold two of the squares up as walls, one square lands on top of a wall that is already covered, and one face of the cube is left open.
  4. Step 4: Check for overlap or gap: Because of the diagonal stepping, two squares end up folding onto the same face while another face remains uncovered. A valid cube net must have every face covered once with no overlap. Here we get an overlap and a missing face, so the folding fails.
  5. Step 5: Conclude: Since the folding produces an overlap and leaves a face open, figure (iii) does not close into a cube even though it has 6 squares. Therefore it is not a net of a cube. Remember: having 6 squares is necessary but not enough; the arrangement must also fold correctly.

Final Answer

Figure (iii) is NOT a net of a cube. It has 6 squares, but the staircase arrangement causes an overlap and leaves one face open when folded, so it does not form a closed cube.

Common Mistake

A common mistake is to assume that any figure with 6 equal squares is automatically a net of a cube. The number of squares is only the first check; the arrangement must also fold up without overlapping or leaving any face empty.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Count the total number of squares in figure (iii). Going through the staircase arrangement carefully, we find there are exactly 6 squares. — Reason: A cube has 6 faces, so having exactly 6 squares is the first and most basic requirement. If this count fails, we can immediately reject it as a cube net.
  2. Step 2: Observe the pattern of arrangement. In figure (iii), the squares are placed in a stepped, diagonal staircase pattern — each square is shifted one unit to the side and one unit down from the previous one, creating a zig-zag layout. — Reason: The arrangement of the squares (not just their count) determines whether folding is possible without overlap, so we must study the layout carefully.
  3. Step 3: Choose one square as the bottom face and begin mentally folding the adjacent squares upward to form the sides of the cube. Track which face each square would occupy after folding. — Reason: Mentally simulating the fold is the standard method to test whether a flat net can become a 3-D closed cube.
  4. Step 4: Continue folding the remaining squares in the staircase. Because of the diagonal shift in the arrangement, two of the squares end up rotating into the same face position — they try to cover the same face of the cube at the same time, causing an overlap. — Reason: In a valid net, every square must land on a unique face; if two squares claim the same face, the net is invalid.
  5. Step 5: Check whether all 6 faces of the cube are covered after the fold. Since the staircase arrangement causes an overlap (one face is covered twice), at least one other face is left completely open and uncovered. — Reason: A closed cube needs all 6 faces sealed; an open face means the net does not produce a proper cube.
  6. Step 6: Conclude the test: figure (iii) has 6 squares (count condition met), but the staircase layout leads to both an overlap and an open face when folded. Both conditions — no overlaps AND no open faces — must hold simultaneously for a valid net, and here both are violated. — Reason: Satisfying just the count is necessary but not sufficient; the spatial arrangement must also work correctly.

Final Answer

Figure (iii) is NOT a net of a cube. It has 6 squares, but the staircase arrangement causes an overlap and leaves one face open when folded, so it does not form a closed cube.

Common Mistake

One common mistake: Students assume that any flat shape made of exactly 6 equal squares must be a valid net of a cube. The count of 6 squares is only the first requirement — the arrangement must also allow folding into a closed cube with no overlapping faces and no missing faces.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Count squares in figure (iii): 6 squares (condition satisfied).
  2. Step 2: Arrangement: staircase (zig-zag) pattern — not a flat strip or cross.
  3. Step 3: On folding: two squares overlap at one face, one face left uncovered — invalid net.

Answer: Figure (iii) is NOT a net of a cube. It has 6 squares, but the staircase arrangement causes an overlap and leaves one face open when folded, so it does not form a closed cube.

➕ More Examples

More Examples

Example 1

Question: Look at the arrangement of 6 squares described below and decide whether it forms a valid net of a cube. The arrangement (called Shape A) is a cross shape: one central square, one square attached to each of its four sides (left, right, top, bottom), and one more square attached to the right side of the rightmost square. Is Shape A a valid net of a cube? Justify your answer by describing how it folds.

Solution: We first count the squares: there are 6 squares in total. That satisfies the basic requirement. Now label the squares for easy reference: - Square 1 (centre) - Square 2 (left of centre) - Square 3 (right of centre) - Square 4 (top of centre) - Square 5 (bottom of centre) - Square 6 (right of Square 3) Folding process: Take Square 1 as the Bottom face. Fold Square 4 (top of centre) upward — it becomes the Front face. Fold Square 5 (bottom of centre) downward — it becomes the Back face. Fold Square 2 (left of centre) to the left — it becomes the Left face. Fold Square 3 (right of centre) to the right — it becomes the Right face. Now Square 6 is attached to the right of Square 3 (which is now the Right face). Folding Square 6 further, it folds over to become the Top face. All 6 faces are covered: Bottom, Front, Back, Left, Right, and Top. No overlap occurs. This cross-shaped arrangement with one extra square on the right is one of the 11 valid nets of a cube.

Answer: Yes, Shape A is a valid net of a cube. When folded, its 6 squares cover all 6 faces — Bottom, Front, Back, Left, Right, and Top — without any overlap.

Example 2

Question: Consider the following two arrangements of 6 squares (Shape P and Shape Q) and determine which one is a valid net of a cube. Shape P: A straight row of 4 squares in a line, with one square attached above the 2nd square in the row and one square attached below the 3rd square in the row. Shape Q: A straight row of all 6 squares placed one after another in a single line (a 1 × 6 strip). For each shape, state whether it is a valid net of a cube and explain why.

Solution: Checking Shape Q first (easier to eliminate): Shape Q is a straight strip of 6 squares in a line: \[ \boxed{\square\;\square\;\square\;\square\;\square\;\square} \] Label them squares 1 through 6 from left to right. If we fold this strip: - Square 1 becomes the Bottom. - Square 2 folds up to become the Front. - Square 3 folds further to become the Top. - Square 4 folds further to become the Back. - Square 5 folds further and lands on the Bottom again (overlap with Square 1). - Square 6 would overlap further. Squares 5 and 6 overlap with already-covered faces. Also, the Left and Right faces are never covered. Shape Q is NOT a valid net of a cube. Checking Shape P: Shape P has a row of 4 squares (call them A, B, C, D from left to right), square E above B, and square F below C. Label faces by folding: - Take square A as the Bottom face. - Square B folds up: Front face. - Square C folds further: Top face. - Square D folds further: Back face. - Square E is above B (the Front face), so it folds to become the Left face. - Square F is below C (the Top face), so it folds to become the Right face. All 6 faces are covered: Bottom (A), Front (B), Top (C), Back (D), Left (E), Right (F). No overlaps occur. Shape P is a valid net of a cube.

Answer: Shape P is a valid net of a cube (its 6 squares fold to cover all 6 faces without overlap). Shape Q (a straight 1 × 6 strip) is NOT a valid net, because folding it causes overlapping faces and leaves two faces uncovered.

🎯 Try a Similar Question

Try a Similar Question

Question: Four arrangements of 6 equal squares are described below. Without cutting, first try to decide by visualisation which of these arrangements is NOT a valid net of a cube. Then verify by making cutouts and folding. Arrangement A: A row of 4 squares in a horizontal line, with one square attached above the 2nd square and one square attached below the 3rd square. Arrangement B: A row of 3 squares in a horizontal line, with 2 squares attached below the 3rd square (making an L-shape extension), and 1 square attached above the 1st square. Arrangement C: A cross shape — 1 square on top, 1 square below that, 1 square to the left of the middle square, 1 square to the right of the middle square, 1 square below the bottom square, and 1 square to the right of that bottom square. Arrangement D: A column of 4 squares in a vertical line, with 1 square attached to the right of the 1st square (top) and 1 square attached to the right of the 2nd square. Which arrangement is NOT a valid net of a cube? Justify your answer.

Solution

  1. Step 1: Recall the rule for a valid net of a cube: A valid net of a cube must have exactly 6 squares joined edge-to-edge. When folded, each square must cover exactly one face of the cube — no overlaps and no open faces. If two squares end up on the same face when folded, the net is invalid.
  2. Step 2: Analyse Arrangement A: Arrangement A has a horizontal row of 4 squares, one square above the 2nd, and one square below the 3rd. This is a well-known valid net of a cube (commonly called the T-cross or offset-T pattern). When folded, the 4 squares in the row wrap around 4 lateral faces, the square above becomes the top, and the square below becomes the bottom. No overlap occurs. Arrangement A is a VALID net.
  3. Step 3: Analyse Arrangement B: Arrangement B has 3 squares in a row, 2 more squares extending below the 3rd square (so a column of 3 going downward from the right end), and 1 square above the 1st square. This gives 6 squares total. When you fold: the row of 3 covers the bottom, front, and top; the square above the 1st covers the back; the 2 extra squares below the 3rd extend to cover the right side and then try to fold to a second position — one of these extra squares lands on the top face, which is already covered by the 3rd square in the row. There is an overlap. Arrangement B is NOT a valid net.
  4. Step 4: Analyse Arrangement C: Arrangement C is a plus/cross shape: a central column of 4 squares with one square to the left and one to the right of the 2nd square from the top. This is the classic plus-sign net. When folded, the 4 squares in the column cover top, front, bottom, and back; the left and right squares cover the two side faces. All 6 faces are covered exactly once. Arrangement C is a VALID net.
  5. Step 5: Analyse Arrangement D: Arrangement D has a vertical column of 4 squares, one square to the right of the 1st (top) square, and one square to the right of the 2nd square. When folded: the column of 4 wraps around the front, bottom, back, and top; the square to the right of the 1st covers the right side; the square to the right of the 2nd covers the left side. All 6 faces are covered without any overlap. Arrangement D is a VALID net.
  6. Step 6: State the final conclusion: After checking all four arrangements, only Arrangement B causes an overlap when folded — two squares land on the same face of the cube, leaving another face uncovered. Therefore, Arrangement B is NOT a valid net of a cube.

Answer: Arrangement B is NOT a valid net of a cube. Although it contains 6 squares joined edge-to-edge, the extra squares extending below the 3rd square in the row cause one face to be covered twice (overlap) while another face is left open when the net is folded, so it cannot form a closed cube.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes