SOLVER7 Study. Nothing Else.
Figure It Out 5 Q3

Which solid corresponds to the given top view, front view, and side view\(?\)

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine looking at a toy block from the front, from above, and from the side. Each view gives you a flat picture, like a shadow. Only one toy block will match all three shadows at the same time. We check each solid one by one. Option (iv) is the only solid whose front shadow, top shadow, and side shadow all match the given pictures perfectly. Just like finding the right toy that fits all three outlines drawn on paper.

Answer: The solid in option (iv) corresponds to the given front view, top view and side view, because all three of its views match the drawn shapes.

📖 Matching a Solid to its Three Views

Detailed Explanation

Every 3D solid can be described using three flat 2D pictures: the front view (what you see looking straight at the front), the top view (looking down from above), and the side view (looking from one side). To match a solid to its views, we imagine standing in each position and check whether the flat shape we would see matches the given picture. Here the given front view is like an L-shape (a longer lower rectangle with a smaller block on top), the top view shows a rectangle split into parts, and the side view shows a small step shape. We must find the solid among (i) to (vii) that produces all three of these views at the same time.

Formula Used

There is no numerical formula. The rule used is: A solid matches the views only if Front view, Top view AND Side view all agree with the drawn shapes. Front view = looking from the front, Top view = looking from above, Side view = looking from a side.

Solution

  1. Step 1: Read the given views carefully. The Front View looks like two rectangles: a wide lower rectangle with a smaller raised block sitting on the left-upper part, giving a stepped or L-type outline. The Top View is a rectangle divided into smaller cells (showing there are cubes arranged in a rectangular base). The Side View is a small stepped shape made of little squares going up like a staircase.
  2. Step 2: Understand what each view tells us. The Top View tells us the shape of the base when seen from above. The Front View tells us the height pattern of the front face. The Side View tells us the height pattern along the depth (the staircase step means the solid rises by one small block on the side).
  3. Step 3: Test the given options one by one. For each solid, imagine looking from the front, then from above, then from the side, and compare each imagined shape with the drawn view. A solid is correct only if ALL THREE views match, not just one or two.
  4. Step 4: Solids like (ii), (iii) and (v) have extra blocks or arms that would make the front or side view look different (they would show more steps or a different outline), so they do not match all three drawings. We reject any solid whose side view is not the simple small staircase shown.
  5. Step 5: The solid in option (iv) gives a front face that matches the L-shaped front view, a rectangular divided base that matches the top view, and a small stepped side face that matches the side view. Since all three views agree, this is the required solid.

Final Answer

The solid in option (iv) corresponds to the given front view, top view and side view, because all three of its views match the drawn shapes.

Common Mistake

A common mistake is to pick a solid just because ONE view (usually the front view) matches, without checking the top and side views. A correct answer must satisfy all three views at the same time.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Carefully study the three given views one at a time. The Front View shows two rectangles arranged in a stepped pattern — a wide lower rectangle with a smaller block raised on one side, giving an L-type or staircase outline. The Top View shows a rectangle subdivided into smaller cells, indicating a flat rectangular arrangement of unit cubes when seen from above. The Side View shows a small staircase shape made of unit squares stepping upward. — Reason: Before comparing any solid, you must clearly understand what each given view looks like, so you have a precise mental checklist to match against each option.
  2. Step 2: Decode what each view reveals about the solid. The Top View describes the base footprint seen from above. The Front View describes the height profile along the front. The Side View describes the height profile along the side. — Reason: Each view gives independent information; all three together fully constrain the shape.
  3. Step 3: Check options (i), (ii), and (iii) by simulating each view mentally. For each solid, picture what you would see from the front, from above, and from the side. In these options at least one view fails to match the given shapes — for instance the front view may appear as a plain rectangle rather than the required stepped outline. — Reason: Eliminating wrong options one by one builds confidence and prevents guessing.
  4. Step 4: Now examine option (iv). Looking at this solid from the front produces the stepped L-shaped outline with a wide lower rectangle and a smaller raised block on one side, which exactly matches the given Front View. — Reason: The front view is the first of three checkpoints that must pass.
  5. Step 5: For option (iv), look at the solid from directly above. The shape seen is a rectangle subdivided into unit-square cells, matching the given Top View exactly. — Reason: Confirming the top view ensures the base footprint of the solid is correct, not just its front profile.
  6. Step 6: For option (iv), now look from the side. The outline is a small staircase of unit squares stepping upward, exactly matching the given Side View. — Reason: The side view is the final checkpoint; only after all three views agree can the identification be confirmed with certainty.
  7. Step 7: Since option (iv) satisfies the complete matching rule — all three views agree simultaneously — it is uniquely identified as the correct solid. No other option passes all three checks at once. — Reason: The rule requires every single view to match; partial matches are not acceptable.

Final Answer

The solid in option (iv) corresponds to the given front view, top view and side view, because all three of its views match the drawn shapes.

Common Mistake

One common mistake: Students sometimes select a solid whose front view matches the given picture but forget to verify the top view and side view. A solid is correctly identified only when all three views match at the same time — checking just one or two views is not enough.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given views: Front view = L-shaped stepped outline, Top view = rectangle divided into cells, Side view = small staircase shape.
  2. Step 2: Check each option: A solid matches only if all three conditions hold simultaneously — Front view match AND Top view match AND Side view match.
  3. Step 3: Option (iv) produces the L-shaped front view, the rectangular divided top view, and the stepped side view — all three match.

Answer: The solid in option (iv) corresponds to the given front view, top view and side view, because all three of its views match the drawn shapes.

➕ More Examples

More Examples

Example 1

Question: A solid gives the following views: the front view is a rectangle that is wider than it is tall, the side view is also a rectangle (same height, different width), and the top view is a rectangle. What solid does this most likely represent?

Solution: Step 1: Analyse the front view. A rectangle from the front means the solid has a flat, rectangular face facing us. This rules out spheres and cones (which would give circles or triangles). Step 2: Analyse the side view. A rectangle from the side as well confirms that the solid is not cylindrical (a cylinder's side view is a rectangle, but its top view would be a circle, not a rectangle). Step 3: Analyse the top view. A rectangle (or square) seen from the top confirms that the base of the solid is rectangular. A cylinder would show a circle from the top, and a pyramid would show a rectangle with diagonals from the top. Step 4: Combine all three views. Front view = rectangle, Side view = rectangle, Top view = rectangle. All three views are rectangles (possibly of different dimensions). This is the defining property of a cuboid (rectangular box). Step 5: Verify. For a cuboid with length \( l \), breadth \( b \), and height \( h \): the front view is an \( l \times h \) rectangle, the side view is a \( b \times h \) rectangle, and the top view is an \( l \times b \) rectangle. All three are rectangles, which matches perfectly. Conclusion: The solid is a cuboid.

Answer: Cuboid

Example 2

Question: A solid gives the following views: the front view is a triangle, the side view is a triangle, and the top view is a square with both diagonals drawn (i.e. a square with an X inside it). What solid does this correspond to?

Solution: Step 1: Analyse the front view. A triangular front view means the solid tapers to a point (apex) at the top. This is characteristic of a pyramid or a cone. Step 2: Analyse the side view. A triangular side view as well is consistent with a pyramid. A cone would also give a triangle from the side, but we must check the top view to decide. Step 3: Analyse the top view. A square with both diagonals drawn is the key clue. Seen from above, a square pyramid shows its square base, and the four slanting edges appear as the two diagonals of the square connecting each corner of the base to the apex (which appears as the centre point). This gives exactly a square with an X inside. Step 4: Compare with a cone. A cone's top view would be a circle (with possibly a dot at the centre for the apex), not a square. So the solid is not a cone. Step 5: Compare with a triangular pyramid. A triangular pyramid (tetrahedron) would show a triangle from the top, not a square. Step 6: Combine all three views. Front view = triangle, Side view = triangle, Top view = square with diagonals. These three views together uniquely identify a square pyramid (a pyramid with a square base and four triangular faces meeting at a single apex). Conclusion: The solid is a square pyramid.

Answer: Square Pyramid

🎯 Try a Similar Question

Try a Similar Question

Question: Four solids are described below: (i) A cuboid (brick shape) (ii) A cylinder (iii) A triangular prism (iv) A cone A solid has the following views: - Front view: a triangle - Top view: a circle - Side view: a triangle Which solid from the options above corresponds to these three views?

Solution

  1. Step 1: Understand What Each View Means: The front view is the 2D shape seen when looking at the solid straight from the front. The top view is the 2D shape seen when looking at the solid from directly above. The side view is the 2D shape seen when looking at the solid from the right side.
  2. Step 2: Analyse Option (i) — Cuboid: A cuboid has rectangular faces. Its front view is a rectangle, top view is a rectangle, and side view is a rectangle. None of these match a triangle or a circle. So option (i) is eliminated.
  3. Step 3: Analyse Option (ii) — Cylinder: A cylinder has a circular cross-section. Its front view is a rectangle, top view is a circle, and side view is a rectangle. The top view matches (circle), but the front and side views do not match (they are rectangles, not triangles). So option (ii) is eliminated.
  4. Step 4: Analyse Option (iii) — Triangular Prism: A triangular prism has triangular faces on two ends and rectangular faces on the sides. Its front view is a triangle, top view is a rectangle, and side view is a rectangle (or triangle depending on orientation). The top view does not match (circle). So option (iii) is eliminated.
  5. Step 5: Analyse Option (iv) — Cone: A cone has a circular base and tapers to a point (apex). When viewed from the front, you see a triangle (the slanted sides meeting at the apex). When viewed from the top (directly above), you see a circle (the circular base with the apex at the centre). When viewed from the side, you again see a triangle (same as the front view due to symmetry). All three views match perfectly.
  6. Step 6: Conclusion: The solid that gives a triangle as the front view, a circle as the top view, and a triangle as the side view is a cone. Therefore, option (iv) is the correct answer.

Answer: The solid in option (iv), the cone, corresponds to the given front view (triangle), top view (circle), and side view (triangle), because all three of its views match the described shapes.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes