SOLVER7 Study. Nothing Else.
Figure It Out 6 Q2

Draw the following figures on the isometric grid. [Hint: It may be useful to determine whether the edge to be currently drawn — say, along the height — goes from down to up or up to down. Accordingly, draw the line segment on the grid either in the direction of the height axis or opposite to it.]

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine looking at a toy made of small cubes from a corner — you can see its top, left side, and right side all at once. A special dotted grid called an isometric grid helps us draw this view on flat paper. Every edge of the toy follows one of just three directions: slanting right, slanting left, or straight up. No edge gets stretched or squished — one real cube unit always equals one grid unit. Like tracing a building block toy onto graph paper, each shape stays true to its real size and look.

Answer: Each solid is drawn by tracing its edges along the three isometric directions — length slant, breadth slant, and vertical height. The L-shape shows a tall block with a lower stepped-out part, the T-shape shows a wide base with a central raised block, and the staircase shows three cubes rising step by step, each drawn true to size on the isometric grid.

📖 Drawing Solid Shapes on an Isometric Grid

Detailed Explanation

An isometric grid is a special dotted grid where the dots are arranged so that three main directions are used to draw a 3D shape: two slanting directions (going up-left and up-right) that show length and breadth, and one vertical direction that shows height. On this grid, all real lengths are kept true, so a cube of edge 1 unit is drawn using 1 unit along each of these three directions. The three figures shown are made of unit cubes joined together. The L-shape looks like a tall block with a step cut out, the T-shape has a wider base with a raised centre, and the staircase rises in steps. To draw them correctly, we follow the edges of the picture and decide the direction of each edge: slanting edges follow the two length/breadth axes, and vertical edges follow the height axis. The hint reminds us that when tracing an edge along the height, we must notice if we are moving up or down, and draw the segment in the height direction or opposite to it accordingly.

Formula Used

There is no numerical formula. The rule used is: every edge is drawn along one of three isometric directions — \( \text{up-right slant (length)} \), \( \text{up-left slant (breadth)} \), and \( \text{vertical (height)} \) — and each unit of real length equals one unit on the grid.

Solution

  1. Step 1: Understand the isometric directions: On the isometric grid, mark three directions from any dot: one line slanting up to the right (for length), one line slanting up to the left (for breadth), and one straight vertical line (for height). Every edge of the solid must be parallel to one of these three directions. This keeps the drawing looking 3D and keeps all measurements correct.
  2. Step 2: Count the unit cubes in each figure: Look at each picture as a stack of unit cubes. The L-shape is like a column of cubes with the lower front part sticking out, forming an L when seen from the side. The T-shape has a flat wide base of cubes with a single tall block rising from the middle, forming a T when seen from the front. The staircase has three cubes arranged so each higher cube sits behind and above the one in front, forming steps.
  3. Step 3: Draw the L-shaped solid: Start at a dot for the front bottom corner. First draw the outline of the base using the two slant directions. Then draw the vertical edges upward along the height direction. For the L-shape, draw the tall upright part fully, then bring the height down for the shorter stepped-out part. Use the hint: when going from the tall top to the lower step, draw the segment downward, opposite to the height axis. Complete the visible top and side faces by joining corners along the correct slant directions.
  4. Step 4: Draw the T-shaped solid: First draw the wide, low base as a flat cuboid using the two slant directions for length and breadth, and a small height upward. On top of the middle of this base, draw the tall raised block by going upward along the height direction. Make sure the raised block sits exactly in the centre of the base so the front view looks like the letter T. Join all matching corners with slant lines so the two parts look like one connected solid.
  5. Step 5: Draw the staircase solid: Begin with the front lowest step. Draw its cube outline using the length slant, breadth slant, and height. Then for the next step, move backward (along the breadth slant) and upward (along the height) and draw the next cube's face. Repeat for the third step. Each time you rise to a new step, the height edge goes up; where a step face drops back down to the next level, draw the edge opposite to the height axis, as the hint suggests.
  6. Step 6: Clean up and check: Darken only the edges that are actually visible in a real solid, and lightly show or leave out hidden edges as required. Check that every edge is parallel to one of the three isometric directions and that the number of unit lengths on each edge matches the original figure. This confirms the isometric drawings are accurate.

Final Answer

Each solid is drawn by tracing its edges along the three isometric directions — length slant, breadth slant, and vertical height. The L-shape shows a tall block with a lower stepped-out part, the T-shape shows a wide base with a central raised block, and the staircase shows three cubes rising step by step, each drawn true to size on the isometric grid.

Common Mistake

A common mistake is drawing the vertical (height) edges as slanting lines, or slanting the length and breadth edges at wrong angles. On an isometric grid, height edges must stay perfectly vertical, and the slant edges must follow the fixed grid directions — otherwise the solid looks distorted.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the three isometric directions on the grid: a slant going up-right (representing length), a slant going up-left (representing breadth), and a straight vertical line (representing height). — Reason: Every edge of any solid built from unit cubes must lie exactly along one of these three directions; knowing them before you start prevents edges from being drawn at wrong angles.
  2. Step 2: Count the unit cubes that make up the solid you are drawing and note the overall shape. For the L-shape, observe that it is a tall vertical block with a shorter block stepped out at its base. For the T-shape, observe that it has a wide flat base with a single raised block in the centre. For the staircase, observe three cubes placed so each one is one unit higher and one unit deeper than the previous. — Reason: Understanding the arrangement of cubes tells you which edges are shared (hidden) and which edges face outward and must be drawn.
  3. Step 3: Start the L-shape from a single reference dot on the grid. Draw the tall block first: move vertically upward by the number of height units, then extend along the right-slant and left-slant directions for length and breadth. Next, add the stepped-out lower portion by extending the breadth slant outward and drawing its shorter vertical height. Connect all visible edges. — Reason: Beginning with the tallest part anchors the shape correctly and makes it easier to attach the lower step without losing track of true lengths.
  4. Step 4: Draw the T-shape from a new reference dot. First, lay out the wide base by extending along both the right-slant (length) and left-slant (breadth) directions and drawing a short vertical height for the base block. Then, from the centre of the top face of the base, draw the raised central block upward using the vertical direction, and close its top face with the two slant directions. — Reason: Drawing the base first establishes the footprint, and adding the raised centre on top keeps proportions accurate on the isometric grid.
  5. Step 5: Draw the staircase from a reference dot at the bottom-front. Place the first (lowest) cube: draw one unit along the right-slant, one unit up-left, and one unit vertically. Attach the second cube directly behind and one unit higher: shift one unit along the left-slant direction and draw its visible edges. Attach the third cube one unit further back and one unit higher still, drawing its visible edges in the same way. — Reason: Each cube must sit exactly one unit higher and one unit further back than the previous one, which is achieved by consistently moving one unit in the breadth-slant and one unit vertically for each new step.
  6. Step 6: Check every edge in all three drawings: each segment should lie along the right-slant, left-slant, or vertical direction, and each segment should span exactly the correct whole number of grid units matching the real edge length of the cube. Erase or correct any edge that is not aligned with one of the three isometric directions. — Reason: A single misaligned edge makes the solid look distorted; the isometric method only works when all edges strictly follow the three permitted directions.

Final Answer

Each solid is drawn by tracing its edges along the three isometric directions — length slant, breadth slant, and vertical height. The L-shape shows a tall block with a lower stepped-out part, the T-shape shows a wide base with a central raised block, and the staircase shows three cubes rising step by step, each drawn true to size on the isometric grid.

Common Mistake

One common mistake: students sometimes draw slanting edges horizontally or at arbitrary angles instead of strictly following the two isometric slant directions, which squashes or distorts the solid and makes lengths appear unequal even when the real cubes are all the same size.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Identify the three isometric axes: up-right slant for length, up-left slant for breadth, vertical for height.
  2. Step 2: Trace every edge of the solid along exactly one of these three directions, keeping each unit of real length equal to one grid unit.
  3. Step 3: L-shape: draw tall block (height axis), then step out lower portion (breadth slant). T-shape: draw wide base (length slant), then raise central block (height axis). Staircase: place three unit cubes, each shifted one unit along length and one unit up.

Answer: Each solid is drawn by tracing its edges along the three isometric directions — length slant, breadth slant, and vertical height. The L-shape shows a tall block with a lower stepped-out part, the T-shape shows a wide base with a central raised block, and the staircase shows three cubes rising step by step, each drawn true to size on the isometric grid.

➕ More Examples

More Examples

Example 1

Question: On an isometric dot grid, draw a cuboid that is 3 units long (along the right-diagonal axis), 2 units wide (along the left-diagonal axis), and 2 units tall (along the vertical height axis). Label the three visible faces and describe the direction of each set of edges.

Solution: We use an isometric dot grid that has three axes: The vertical axis (height), the right-diagonal axis (length), and the left-diagonal axis (width). Step 1 — Start at a dot near the centre-left of the grid. Call this point A. Step 2 — Draw the bottom-front vertical edge upward along the height axis. Since height goes from bottom to top, draw a segment of 2 units upward. This gives point B directly above A. Step 3 — From A, draw the bottom edge going 3 units along the right-diagonal axis (toward the lower right). This gives point C. Step 4 — From A, draw the bottom edge going 2 units along the left-diagonal axis (toward the lower left). This gives point D. Step 5 — From B (top of the front vertical edge), draw a 3-unit segment parallel to AC along the right-diagonal axis to get point E. Draw a 2-unit segment parallel to AD along the left-diagonal axis to get point F. Step 6 — From C and D, draw upward vertical edges of 2 units each to get points G and H respectively. Step 7 — Connect E to G (right-diagonal, 0 units to confirm they coincide) and F to H similarly. Connect G to the top-back corner and H to the top-back corner to complete the solid. The three visible faces are: - The front-left face (a parallelogram on the left-diagonal and height axes) — 2 units wide and 2 units tall. - The front-right face (a parallelogram on the right-diagonal and height axes) — 3 units long and 2 units tall. - The top face (a parallelogram on the right-diagonal and left-diagonal axes) — 3 units long and 2 units wide. Key direction notes: - Height edges: all go straight upward along the vertical axis (from down to up). - Length edges: all go along the right-diagonal axis (from upper-left to lower-right for the bottom face edges, or from lower-left to upper-right for the top face edges). - Width edges: all go along the left-diagonal axis (from upper-right to lower-left for the bottom face edges, opposite for the top face).

Answer: A cuboid of dimensions 3 (length) x 2 (width) x 2 (height) units is drawn on the isometric grid. Height edges go upward (2 units), length edges go along the right-diagonal axis (3 units), and width edges go along the left-diagonal axis (2 units).

Example 2

Question: On an isometric dot grid, draw an L-shaped prism formed by removing a 1 unit x 1 unit x 2 unit cuboid from the top-right corner of a 2 unit x 2 unit x 2 unit cube. Describe step by step which direction each edge is drawn.

Solution: We start with a 2 x 2 x 2 cube on the isometric grid and then describe the L-shaped cross-section formed by removing a 1 x 1 x 2 block from one corner. Step 1 — Place a starting dot A near the centre of the grid. Step 2 — Draw the full 2 x 2 x 2 cube outline first (for reference): - From A, draw 2 units upward (vertical axis) to get B. - From A, draw 2 units along the right-diagonal axis (lower-right) to get C. - From A, draw 2 units along the left-diagonal axis (lower-left) to get D. - Complete the remaining edges of the cube by drawing parallel segments of 2 units from B, C, and D. Step 3 — Now draw the L-shaped prism. The L-cross-section lies in the plane of the right-diagonal and left-diagonal axes. The L-shape is: a 2 x 2 square with a 1 x 1 square removed from one corner. Step 4 — Identify the bottom face of the L-shape. Starting at A: - Go 2 units along the right-diagonal axis to C. - From C, go 1 unit along the left-diagonal axis to point P. - From P, go 1 unit back (opposite to right-diagonal axis) to point Q. - From Q, go 1 unit along the left-diagonal axis to point R (this is the inner corner of the L). - From R, go 1 unit along the left-diagonal axis to D. - From D, close back to A (already 2 units along left-diagonal from A). This traces the L-shaped bottom face. Step 5 — Draw the vertical (height) edges upward by 2 units from each corner of the L-shape: A to B, C to C', P to P', Q to Q', R to R' (inner corner rises 2 units), D to D'. Step 6 — Connect the top points in the same L-shape pattern to form the top face: - B to C' (2 units, right-diagonal axis, going from upper-left toward lower-right at the top level). - C' to P' (1 unit, left-diagonal axis). - P' to Q' (1 unit, opposite to right-diagonal). - Q' to R' (1 unit, left-diagonal axis). - R' to D' (1 unit, left-diagonal). - D' back to B (2 units, opposite to left-diagonal axis, i.e., toward upper-right). Step 7 — The visible faces are the front-right face (a rectangle 2 units tall and 2 units along right-diagonal, minus the 1x1 notch), the top L-shaped face, and the front-left face (a full 2 x 2 parallelogram on the left-diagonal and height axes since the cut is on the right side). Key direction notes: - All height edges go upward (from down to up along the vertical axis), each 2 units. - The inner corner notch edges along the right-diagonal axis go in the direction opposite to the main length edges (from lower-right back toward upper-left). - Carefully check each edge: if you are tracing the L outline and an edge retraces backward along an axis, draw it in the opposite direction on the grid.

Answer: An L-shaped prism is drawn on the isometric grid by outlining a 2 x 2 x 2 cube and removing a 1 x 1 x 2 block from the top-right corner. Height edges go upward (2 units each); the L-outline on the base and top is traced by combining forward and backward segments along the right-diagonal and left-diagonal axes.

🎯 Try a Similar Question

Try a Similar Question

Question: On an isometric dot grid, draw the following three solids: (a) A single cuboid that is 3 units long, 2 units wide, and 1 unit tall. (b) A U-shaped solid made by placing two cuboids (each 1 unit long, 1 unit wide, and 2 units tall) at the two ends of a base cuboid that is 3 units long, 1 unit wide, and 1 unit tall. (c) A double-step staircase made by placing four unit cubes: two cubes side by side on the ground level (forming the bottom step), and two cubes stacked one on top of the other behind the first step (forming the second, taller step). For each solid, clearly show all visible edges along the three isometric directions.

Solution

  1. Step 1 — Understand the isometric grid: An isometric grid has three edge directions: one going straight up (the height axis), one going diagonally to the lower-right (the length axis), and one going diagonally to the lower-left (the breadth axis). Every edge of a solid must be drawn along exactly one of these three directions. One grid unit = one unit of the solid.
  2. Step 2 — Draw the flat cuboid (Part a): The cuboid is 3 units long, 2 units wide, and 1 unit tall. Choose a starting dot. Draw the length edge 3 units along the lower-right slant. From the same starting dot, draw the breadth edge 2 units along the lower-left slant. From the far end of the length edge, draw a breadth edge 2 units along the lower-left slant. From the far end of the breadth edge, draw a length edge 3 units along the lower-right slant. These four edges form the top face (a parallelogram). Drop vertical edges of 1 unit downward from each visible corner to complete the front-right face and front-left face. Connect the bottom corners with length and breadth edges. The result is a wide, flat, slab-like cuboid.
  3. Step 3 — Draw the U-shaped solid (Part b): The U-shape has a base cuboid (3 units long, 1 unit wide, 1 unit tall) with a tall pillar (1 unit long, 1 unit wide, 2 units tall) sitting on top of each end of the base. First, draw the base cuboid: starting dot, 3 units along the lower-right slant for length, 1 unit along the lower-left slant for breadth, and 1 unit vertically for height, closing all faces. Then, at the left end of the base, add the left pillar: draw a cuboid 1 unit long, 1 unit wide, and 2 units tall by tracing 1 unit along the length axis, 1 unit along the breadth axis, and 2 units along the height axis upward. Repeat the same process at the right end of the base for the right pillar. The middle of the top of the base is open (no block), giving the characteristic U-shape.
  4. Step 4 — Draw the double-step staircase (Part c): The staircase has two steps. The bottom step is 2 unit cubes placed side by side at ground level (so it is 2 units along the length, 1 unit wide, 1 unit tall). The second step sits directly behind and on top of the bottom step but rises 1 more unit (the back stack is 1 unit long, 1 unit wide, and 2 units tall). To draw it: start with the front-bottom-right corner. Draw the bottom step first — 2 units along the lower-right (length) direction, 1 unit along the lower-left (breadth) direction, and 1 unit vertically. Then, draw the back column of 2 cubes directly behind the bottom step — from the back edge of the bottom step, go 1 unit along the lower-right direction and 2 units vertically, adding the second level. The visible edges show the step profile clearly.
  5. Step 5 — Verify the drawings: Check each drawing: (a) The flat cuboid should look like a squashed box — wide and long, with height of only 1 unit. (b) The U-shape should have two tall pillars at the sides and an open gap in the middle at the top. (c) The staircase should clearly show two distinct steps rising from right to left (or left to right), with the back block being 2 units tall and the front block being 1 unit tall. In every drawing, confirm that all edges are drawn strictly along one of the three isometric directions and that no edge is drawn at an arbitrary angle.

Answer: Three solids are drawn on the isometric dot grid: (a) A flat cuboid (3 units long, 2 units wide, 1 unit tall) shown as a wide, low rectangular block with all edges along the three isometric directions. (b) A U-shaped solid with a long base and two tall pillars at its ends but open in the middle at the top, each part traced along the length-slant, breadth-slant, and vertical-height axes. (c) A two-step staircase with a wide bottom step (2 units long, 1 unit tall) and a taller back column (1 unit long, 2 units tall) directly behind it, clearly showing the step profile on the isometric grid.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes