SOLVER7 Study. Nothing Else.
Figure It Out 5 Q4

Using identical cubes, make a solid that gives the following projections.

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine stacking toy blocks and then taking photos from three directions — from above, from the front, and from the side. Each photo shows a flat picture of the same solid. Your job is to arrange the blocks so all three photos match the given pictures at once. The top photo tells you how the blocks are spread on the floor. The front and side photos tell you how tall the blocks are in different spots. Like solving a puzzle, you keep adjusting until every photo matches perfectly.

Answer: For each set of three views, build the solid as follows. Set (i)-(iii): make an L-shaped base of cubes and place one extra cube on top at one corner. Set (iv)-(vi): make a small L-shaped (step) base and raise one part to two cubes high, forming a staircase. Set (vii)-(ix): make an L-shaped base of cubes and stack extra cubes to create the taller column shown in the front and side views. In every case the finished solid, when viewed from above, from the front and from the side, must exactly reproduce the given Top, Front and Side Views.

📖 Making Solids from Identical Cubes Using Their Views

Detailed Explanation

When we look at a 3D solid made of identical cubes, we can draw three different 2D pictures called views. The Top View is what we see looking straight down from above. The Front View is what we see looking straight from the front. The Side View is what we see looking from the side. Each square in a view represents the face of a cube. To build the correct solid, we must arrange the cubes so that all three views match at the same time. The Top View tells us the base shape (how the cubes are spread on the floor), while the Front View and Side View tell us how tall the solid is in different places (how many layers of cubes are stacked).

Formula Used

There is no numerical formula. The rule is: Top View gives the base plan (floor arrangement), Front View gives the height as seen from the front, and Side View gives the height as seen from the side. The built solid must satisfy all three views together.

Solution

  1. Step 1: Understand the three views. The Top View is seen from above, the Front View is seen from the front, and the Side View is seen from one side. Each little square in a view is one face of a unit cube. Our aim is to stack identical cubes so that the shadow-like outline from all three directions matches the given pictures.
  2. Step 2: Solve set (i), (ii), (iii). The Top View (i) shows an L-shaped base with a small block sticking out on top. Use the Top View to place cubes on the floor in that L-shape. The Front View (ii) is a long shape with a raised block, meaning the solid is one cube high in most places and two cubes high at one spot. The Side View (iii) confirms that the raised part is at one end. So build an L-shaped layer of cubes on the ground and place one extra cube on top at the corner where the raised block appears in the front and side views.
  3. Step 3: Solve set (iv), (v), (vi). The Top View (iv) is a small step-shaped (L-shaped) base. Place the cubes on the floor to make this step shape. The Front View (v) shows two rows, meaning the solid is two cubes tall in part of the arrangement. The Side View (vi) shows a step going up. Arrange the cubes so that one part of the base is one cube high and the neighbouring part is two cubes high, forming a small staircase that gives all three views correctly.
  4. Step 4: Solve set (vii), (viii), (ix). The Top View (vii) is again an L-shaped base of cubes. The Front View (viii) shows a raised middle or corner block over a base row, meaning some cubes are stacked to make a two-cube-high column. The Side View (ix) shows a longer step shape. Place the cubes flat according to the Top View, then stack extra cubes to make the taller portion shown in the Front and Side Views, checking each direction as you build.
  5. Step 5: Check your solid. After building each solid, look at it from above, from the front, and from the side. Compare each of these three shadows with the given views. If all three match exactly, the solid is correct. If one view does not match, add or remove a cube until all three views agree.

Final Answer

For each set of three views, build the solid as follows. Set (i)-(iii): make an L-shaped base of cubes and place one extra cube on top at one corner. Set (iv)-(vi): make a small L-shaped (step) base and raise one part to two cubes high, forming a staircase. Set (vii)-(ix): make an L-shaped base of cubes and stack extra cubes to create the taller column shown in the front and side views. In every case the finished solid, when viewed from above, from the front and from the side, must exactly reproduce the given Top, Front and Side Views.

Common Mistake

A common mistake is to build the solid using only one view (usually the Top View) and forgetting to check the height shown by the Front and Side Views. This gives a flat wrong solid. Always make sure the number of cube layers matches the Front and Side Views as well, so that all three views are satisfied at the same time.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Understand what each view tells you: The Top View is the picture you get when you look straight down onto the solid from above — it shows the shape of the base (the floor plan). The Front View is what you see when you look at the solid from directly in front — it shows which columns of cubes are tall and which are short. The Side View is what you see from one side — it again shows the heights but from a different direction. Every small square in any view represents exactly one face of a unit cube. — Reason: Before placing any cube, you must know what information each view carries so that you can use all three together.
  2. Step 2: General building strategy: Start by reading the Top View to decide where to place cubes on the ground level. Then use the Front View to find out how many cubes must be stacked in each column as seen from the front. Finally, cross-check with the Side View to confirm the heights from the side direction. Adjust the arrangement until every view is reproduced exactly. — Reason: This order (Top View first, then Front, then Side) prevents contradictions and ensures the base matches before heights are decided.
  3. Step 3: Solve Set (i)–(iii): The Top View (i) shows an L-shaped region of squares, meaning the base of the solid is L-shaped. Place cubes on the floor in that L-shape. Next, look at the Front View (ii): it is mostly one cube tall but has one raised block at a corner, telling you one position in the L must carry an extra cube on top. Check the Side View (iii) to confirm which corner gets the extra cube. Place exactly one additional cube on top of that corner position. — Reason: The L-shaped base satisfies the Top View, the raised block in the Front View demands exactly one column of height 2, and the Side View pinpoints its location.
  4. Step 4: Solve Set (iv)–(vi): The Top View (iv) shows a small L-shaped (step-like) base. Lay cubes on the ground in that step pattern. The Front View (v) shows a staircase outline — one part is one cube tall and an adjacent part is two cubes tall. The Side View (vi) confirms this staircase rises from one side to the other. Stack a second cube on top of the higher part of the L to create the two-level staircase. — Reason: The step base from the Top View together with the staircase heights from the Front and Side Views together describe a solid that looks like a two-step stair when viewed from the front or side.
  5. Step 5: Solve Set (vii)–(ix): The Top View (vii) again shows an L-shaped base. Lay cubes on the ground in that L-shape. The Front View (viii) shows a taller column — one part of the L rises to three or more cubes high. The Side View (ix) confirms the same taller column is visible from the side as well. Stack extra cubes on the appropriate position of the L until the column reaches the height shown in both the Front and Side Views. — Reason: The L-shaped top view sets the floor plan, and the taller column visible in both the Front and Side Views must be placed at the corner that appears tall from both directions.
  6. Step 6: Verify all views: After building each solid, mentally (or physically) look at it from above, from the front, and from the side. Trace the outline of cubes visible in each direction and compare square-by-square with the given views. If any view does not match, adjust the cube positions — add or remove cubes — until all three views are reproduced exactly. — Reason: A solid is correct only when all three views are satisfied simultaneously; matching only two views is not enough.

Final Answer

For each set of three views, build the solid as follows. Set (i)-(iii): make an L-shaped base of cubes and place one extra cube on top at one corner. Set (iv)-(vi): make a small L-shaped (step) base and raise one part to two cubes high, forming a staircase. Set (vii)-(ix): make an L-shaped base of cubes and stack extra cubes to create the taller column shown in the front and side views. In every case the finished solid, when viewed from above, from the front and from the side, must exactly reproduce the given Top, Front and Side Views.

Common Mistake

One common mistake: students use only the Top View and the Front View to build the solid and ignore the Side View. This often leads to a solid that looks correct from two directions but is completely wrong when viewed from the side. Always verify all three views before accepting your answer.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Rule: Top View gives the base (floor) layout; Front View and Side View each give the height profile from their respective directions. The solid must satisfy all three views simultaneously.
  2. Step 2: Set (i)-(iii): Top View shows an L-shaped base. Front View shows a raised section at one end. Build an L-shaped layer of cubes on the floor, then place one extra cube on top at the raised corner.
  3. Step 3: Set (iv)-(vi): Top View shows a smaller L-shape (step outline). Front and Side Views each show two distinct height levels. Arrange cubes in a stepped (staircase) form: one part one cube high, the adjacent part two cubes high.
  4. Step 4: Set (vii)-(ix): Top View shows an L-shaped base. Front and Side Views show a taller column at one corner. Build the L-shaped base layer, then stack additional cubes at the indicated corner to match the taller profile.

Answer: For each set of three views, build the solid as follows. Set (i)-(iii): make an L-shaped base of cubes and place one extra cube on top at one corner. Set (iv)-(vi): make a small L-shaped (step) base and raise one part to two cubes high, forming a staircase. Set (vii)-(ix): make an L-shaped base of cubes and stack extra cubes to create the taller column shown in the front and side views. In every case the finished solid, when viewed from above, from the front and from the side, must exactly reproduce the given Top, Front and Side Views.

➕ More Examples

More Examples

Example 1

Question: Using identical unit cubes, build a solid that gives the following three views: \nFront View: A 3-column, 2-row shape — all 6 unit squares filled (a 3 wide, 2 tall rectangle). \nSide View: A 2-column, 2-row shape — all 4 unit squares filled (a 2 wide, 2 tall rectangle). \nTop View: A 3-column, 2-row shape — all 6 unit squares filled (a 3 wide, 2 tall rectangle). \nWhat is the minimum number of unit cubes required to build such a solid?

Solution: Label the top view as a grid with 3 columns (left to right: C1, C2, C3) and 2 rows (front to back: R1, R2). \nThe Front View is 3 wide and 2 tall, so each column C1, C2, C3 must reach a height of at least 2 in at least one of the rows R1 or R2. \nThe Side View is 2 wide and 2 tall. The 2 columns of the side view correspond to rows R1 and R2 of the solid. Both rows must have at least one column reaching height 2. \nThe Top View shows all 6 cells filled, meaning every cell in the 3 × 2 grid must have at least 1 cube. \nNow, find the minimum cubes. Since the Front View shows height 2 for all 3 columns, each column must have at least one cell at height 2. Since the Side View shows height 2 for both rows, each row must have at least one column at height 2. \nTo minimise cubes, we keep most cells at height 1, and raise only what is necessary. \nIf we place height 2 at only one cell per column (to satisfy the Front View), and that cell also covers the Side View requirement, we can achieve the minimum. \nFor example: - Cell (R1, C1): height 2 - Cell (R1, C2): height 2 - Cell (R1, C3): height 2 - Cell (R2, C1): height 1 - Cell (R2, C2): height 1 - Cell (R2, C3): height 1 \nCheck Front View (looking at rows R1 and R2 together, column by column): - C1: max height = 2 ✓, C2: max height = 2 ✓, C3: max height = 2 ✓. Front View is a 3 wide, 2 tall rectangle. ✓ \nCheck Side View (looking at columns C1, C2, C3 together, row by row): - R1: max height = 2 ✓, R2: max height = 1. But the Side View requires height 2 for both rows! \nSo row R2 must also have at least one cell at height 2. Raise cell (R2, C1) to height 2. \nRevised arrangement: - (R1, C1): 2, (R1, C2): 2, (R1, C3): 2 - (R2, C1): 2, (R2, C2): 1, (R2, C3): 1 \nCheck Side View: R1 max = 2 ✓, R2 max = 2 ✓. Side View is 2 wide, 2 tall. ✓\nCheck Front View: C1 max = 2 ✓, C2 max = 2 ✓, C3 max = 2 ✓. ✓\nCheck Top View: All 6 cells have ≥ 1 cube. ✓ \nTotal cubes: \nRow R1 contributes \( 2 + 2 + 2 = 6 \) cubes.\nRow R2 contributes \( 2 + 1 + 1 = 4 \) cubes. \nTotal \[ = 6 + 4 = 10 \text{ cubes} \]

Answer: The minimum number of unit cubes required is 10.

Example 2

Question: Using identical unit cubes, build a solid that gives the following three views: \nFront View: An L-shaped figure — 2 columns wide, but the left column is 3 units tall and the right column is 1 unit tall (total 4 unit squares filled). \nSide View: A single column 3 units tall (1 wide, 3 tall — all 3 unit squares filled). \nTop View: A 2-column, 1-row shape — both cells filled (a 1 tall, 2 wide rectangle). \nWhat is the minimum number of unit cubes required to build such a solid?

Solution: Set up the top view as a 1-row, 2-column grid: cells (R1, C1) on the left and (R1, C2) on the right. There is only 1 row (depth = 1). \nThe Front View is L-shaped: left column (C1) reaches height 3, right column (C2) reaches height 1.\nSo the maximum height in column C1 must be 3, and the maximum height in column C2 must be 1. \nSince there is only one row (R1), the heights are determined directly: - Cell (R1, C1): height must be exactly 3 (to give the left column height of 3 in the Front View). - Cell (R1, C2): height must be exactly 1 (to give the right column height of 1 in the Front View and the right column must not exceed 1). \nCheck Side View: The Side View looks from the right side across all columns. The maximum height seen from that direction is the maximum across C1 and C2 for row R1. Max height = 3 (from C1). The Side View must be 1 wide, 3 tall. ✓ \nCheck Top View: Both cells have ≥ 1 cube. Top View is 2 wide, 1 tall. ✓ \nCount the cubes: - Cell (R1, C1) has 3 cubes. - Cell (R1, C2) has 1 cube. \nTotal \[ = 3 + 1 = 4 \text{ cubes} \]

Answer: The minimum number of unit cubes required is 4.

🎯 Try a Similar Question

Try a Similar Question

Question: Using identical unit cubes, build a solid that gives ALL THREE of the following views simultaneously. Top View: A 2 × 2 square grid (four unit squares arranged in a 2-column, 2-row layout). Front View: The left column appears 2 units tall and the right column appears 1 unit tall (an uneven step shape — taller on the left, shorter on the right). Side View: The back row appears 2 units tall and the front row appears 1 unit tall (an uneven step shape — taller at the back, shorter at the front). How many cubes make up this solid, and describe the arrangement of cubes in each position of the 2 × 2 base grid (label the positions as Back-Left, Back-Right, Front-Left, Front-Right)?

Solution

  1. Step 1 – Set up the 2 × 2 base grid: Label the four positions on the base grid as follows: Back-Left (BL), Back-Right (BR), Front-Left (FL), Front-Right (FR). We need to find the height — number of cubes stacked — at each position. Call these heights \( h_{BL} \), \( h_{BR} \), \( h_{FL} \), \( h_{FR} \).
  2. Step 2 – Read off conditions from the Front View: The Front View shows what you see looking at the solid from the front. Each column of the Front View corresponds to a column of the base grid. The height shown in a column is the maximum height in that column (across back and front rows). Left column of Front View = 2 units tall, so \( \max(h_{BL},\, h_{FL}) = 2 \). Right column of Front View = 1 unit tall, so \( \max(h_{BR},\, h_{FR}) = 1 \).
  3. Step 3 – Read off conditions from the Side View: The Side View shows what you see from the right side. Each row of the Side View corresponds to a row of the base grid. The height shown in a row is the maximum height in that row (across left and right columns). Back row of Side View = 2 units tall, so \( \max(h_{BL},\, h_{BR}) = 2 \). Front row of Side View = 1 unit tall, so \( \max(h_{FL},\, h_{FR}) = 1 \).
  4. Step 4 – Read off conditions from the Top View: The Top View is a 2 × 2 square, meaning all four positions of the base grid are occupied by at least one cube. Therefore every height is at least 1: \( h_{BL} \ge 1 \), \( h_{BR} \ge 1 \), \( h_{FL} \ge 1 \), \( h_{FR} \ge 1 \).
  5. Step 5 – Solve for each height: From Step 3 (Front row): \( \max(h_{FL},\, h_{FR}) = 1 \) and both heights are at least 1, so \( h_{FL} = 1 \) and \( h_{FR} = 1 \). From Step 2 (Right column): \( \max(h_{BR},\, h_{FR}) = 1 \). Since \( h_{FR} = 1 \) and \( h_{BR} \ge 1 \), we need \( h_{BR} = 1 \). From Step 3 (Back row): \( \max(h_{BL},\, h_{BR}) = 2 \). Since \( h_{BR} = 1 \), we need \( h_{BL} = 2 \). Check Step 2 (Left column): \( \max(h_{BL},\, h_{FL}) = \max(2, 1) = 2 \). This matches the Front View. All conditions are satisfied.
  6. Step 6 – Describe the solid and count total cubes: The arrangement is: Back-Left has 2 cubes stacked, Back-Right has 1 cube, Front-Left has 1 cube, Front-Right has 1 cube. Total number of cubes: \[ 2 + 1 + 1 + 1 = 5 \] The solid looks like a flat 2 × 2 layer of four cubes with one extra cube placed on top of the Back-Left position, creating a staircase or stepped tower shape.
  7. Step 7 – Verify all three views: Top View: All four base positions have at least one cube, so the top view is a complete 2 × 2 square. Correct. Front View: Left column max height = \( \max(2, 1) = 2 \); Right column max height = \( \max(1, 1) = 1 \). This gives the taller-left, shorter-right step shape. Correct. Side View: Back row max height = \( \max(2, 1) = 2 \); Front row max height = \( \max(1, 1) = 1 \). This gives the taller-back, shorter-front step shape. Correct.

Answer: The solid uses 5 unit cubes in total. The arrangement in the 2 × 2 base grid is: Back-Left = 2 cubes tall, Back-Right = 1 cube tall, Front-Left = 1 cube tall, Front-Right = 1 cube tall. This forms a flat 2 × 2 base with one extra cube stacked on the back-left corner, which correctly reproduces the given Top View (2 × 2 square), Front View (left side 2 units tall, right side 1 unit tall), and Side View (back 2 units tall, front 1 unit tall).

Everything you get with Solver7

More questions in Exploring Some Geometric Themes