SOLVER7 Study. Nothing Else.
Figure It Out 5 Q2(ii)

Imagine eight identical cubes, glued together along faces to form the letter \(\text{‘C'}\)(refer to the attached image ) Glue additional cubes to make a shape that looks like a\(\text{ ‘C'}\)(refer to the attached image) from the front and \(\text{‘A'}\)(refer to the attached image )from the top.

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine building something with toy blocks that looks like a letter from the front and a different letter from above. The flat 'C' shape made of eight cubes stays as the front wall. Extra cubes are added only going backward, like stretching the shape away from you. Two rows go back behind the left and right sides, and a small row connects them in the middle. No cubes go at the very bottom gap, so the top view forms a perfect 'A' shape.

Answer: Keep the flat eight-cube 'C' as the front-facing wall. Then glue extra cubes going backward: one line behind the left column and one line behind the right column (the two legs of the 'A'), plus a short connecting row in the middle (the crossbar), leaving the bottom gap open. The finished solid then looks like a 'C' from the front and an 'A' from the top, exactly as shown in the second image.

📖 Building a 3D Shape: 'C' from Front, 'A' from Top

Detailed Explanation

This is a spatial visualisation activity about solid shapes made from unit cubes. A 3D shape can look different depending on the direction you look at it. The front view (also called the front face) is what you see when you stand in front of the shape. The top view is what you see when you look straight down from above. The trick here is to keep the flat 'C' shape you already have as the FRONT view, and then add depth (cubes going backward, away from you) so that when someone looks from the TOP, the outline of the cubes forms the letter 'A'. So the same solid must satisfy two different silhouettes at the same time: 'C' from the front and 'A' from the top.

Formula Used

There is no numerical formula. The key idea is: Front view is fixed by the flat 'C', and Top view is created by adding depth (cubes in the back direction). Each added cube must not spoil the front 'C' and must help form the top 'A'.

Solution

  1. Step 1: Understand the starting 'C': The first picture shows eight cubes glued flat to make a 'C'. Think of this flat 'C' as standing up vertically, facing you. This is your FRONT view and it must stay looking like a 'C' at the end. So we must never add a cube in front of it that hides the 'C' gap.
  2. Step 2: Understand what 'top view' means: If you look straight down on the standing 'C', you only see the top edges of the cubes. Right now this top view is just a thin line or a small block, not a letter. To make the top view look like an 'A', we must add cubes going BACKWARD (in the depth direction), because depth is what shows up when we look from above.
  3. Step 3: Decide how the 'A' should sit on top: The letter 'A' from the top needs two slanting or vertical legs, a bar joining them in the middle, and an open bottom (the gap between the legs). The second picture shows this 'A' outline made of cubes. We arrange the extra cubes behind the front 'C' so that, seen from above, their footprint traces out an 'A'.
  4. Step 4: Add the two legs of the 'A': Behind the left column and the right column of the front 'C', glue a line of cubes going backward. These two backward lines become the two legs of the 'A' when seen from the top. They are placed behind the 'C', so from the front they hide behind it and the 'C' shape is not disturbed.
  5. Step 5: Add the crossbar of the 'A': Glue a short row of cubes joining the two legs in the middle depth position. From the top this looks like the horizontal bar of the 'A'. Leave the bottom part between the legs empty so the 'A' has its open V-gap at the bottom.
  6. Step 6: Check both views: Look from the front: you still see the original 'C' because all new cubes are hidden behind it. Look from the top: the footprint of all the cubes (front row plus the two backward legs plus the crossbar) traces the letter 'A'. Both conditions are now satisfied, which matches the second picture.

Final Answer

Keep the flat eight-cube 'C' as the front-facing wall. Then glue extra cubes going backward: one line behind the left column and one line behind the right column (the two legs of the 'A'), plus a short connecting row in the middle (the crossbar), leaving the bottom gap open. The finished solid then looks like a 'C' from the front and an 'A' from the top, exactly as shown in the second image.

Common Mistake

A common mistake is adding cubes in FRONT of the 'C' or filling the gap of the 'C' while trying to build the 'A'. This ruins the front view. Remember: all extra cubes must go BACKWARD (in the depth direction) so the front 'C' stays visible, and only the top footprint changes into an 'A'.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the front view and fix it: The starting picture shows eight unit cubes arranged flat in the shape of the letter 'C'. Treat this flat 'C' as a wall standing upright and facing you — this is the front view. Reason: The problem requires the finished solid to still look like a 'C' when viewed from the front, so this arrangement must not be disturbed by anything placed in front of it or in the gap of the 'C'.
  2. Step 2: Understand what the top view currently looks like: If you now look straight down at the flat 'C' wall, you see only a thin outline along the top — not a letter 'A'. Reason: Depth (cubes placed behind the front wall going away from you) is what creates a recognisable top-view silhouette. Right now there is no depth, so the top view is just a line, not the required 'A' shape.
  3. Step 3: Study the structure of the letter 'A' from above: The letter 'A' viewed from the top has three parts: a left vertical leg, a right vertical leg, and a short horizontal crossbar connecting the two legs somewhere in the middle. There is an open gap below the crossbar and another open gap above the crossbar (the pointed top). Reason: Knowing the target silhouette tells us exactly which columns of the 'C' wall need extra cubes behind them and where a connecting row must be placed.
  4. Step 4: Add depth behind the left column of the 'C': Take the leftmost vertical column of the 'C' (the tall left arm) and glue a row of cubes going straight backward behind it, one cube deep for each level of that column. This row of cubes forms the left leg of the 'A' when seen from above. Reason: The top view needs a left vertical stroke for the 'A', and adding cubes directly behind the left column of the front 'C' creates exactly that stroke without changing the front silhouette.
  5. Step 5: Add depth behind the right column of the 'C': Do the same for the rightmost vertical column of the 'C' (the tall right arm): glue a row of cubes going straight backward behind it at every level. This forms the right leg of the 'A' in the top view. Reason: The 'A' needs two symmetric legs; mirroring the left leg on the right side completes both diagonal strokes of the letter when seen from above.
  6. Step 6: Add the crossbar row in the middle: Find the middle height of the solid (roughly where the horizontal bar of the 'A' should sit). At that level, glue a short row of cubes going from behind the left column across to behind the right column, bridging the gap between the two legs. Reason: The letter 'A' has a horizontal crossbar connecting its two legs. Without this connecting row the top view would show two separate lines, not an 'A'.
  7. Step 7: Leave the bottom gap open and verify both views: Do NOT place any cubes behind the bottom opening of the 'C', so the bottom triangle of the 'A' (below the crossbar) stays empty in the top view. Now check: looking from the front you still see the 'C' shape (the front wall is unchanged); looking from directly above you see two vertical legs joined by a crossbar with an open bottom — the letter 'A'. Reason: Keeping the bottom gap empty is what distinguishes 'A' from other letters and matches the target image. Verifying both views confirms the solid satisfies both conditions simultaneously.

Final Answer

Keep the flat eight-cube 'C' as the front-facing wall. Then glue extra cubes going backward: one line behind the left column and one line behind the right column (the two legs of the 'A'), plus a short connecting row in the middle (the crossbar), leaving the bottom gap open. The finished solid then looks like a 'C' from the front and an 'A' from the top, exactly as shown in the second image.

Common Mistake

One common mistake: students add cubes behind the bottom horizontal bar of the 'C' as well, which fills in the lower gap of the 'A' from the top view and turns the top silhouette into a 'D' or a closed rectangle instead of the open-bottomed letter 'A'.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Front view fixed: flat 8-cube 'C' stands as the front-facing wall (no cubes added in front).
  2. Step 2: Top view target: add cubes going backward — one column behind the left edge, one column behind the right edge (legs of 'A'), plus a short middle row (crossbar of 'A'), leaving the lower gap open.
  3. Step 3: Result: front silhouette = 'C', top silhouette = 'A'.

Answer: Keep the flat eight-cube 'C' as the front-facing wall. Then glue extra cubes going backward: one line behind the left column and one line behind the right column (the two legs of the 'A'), plus a short connecting row in the middle (the crossbar), leaving the bottom gap open. The finished solid then looks like a 'C' from the front and an 'A' from the top, exactly as shown in the second image.

➕ More Examples

More Examples

Example 1

Question: Six identical unit cubes are glued together face-to-face to form the letter 'L' when seen from the front (a vertical column of 3 cubes on the left, with 1 extra cube attached to the right at the bottom). Glue additional cubes to this 'L'-shaped structure so that it still looks like an 'L' from the front but looks like the letter 'T' from the top. How many additional cubes must be added, and where should they be placed? Describe the final arrangement.

Solution: First, picture the base 'L' shape (front view) built from 4 unit cubes: 3 cubes stacked vertically in a column, and 1 cube attached to the right of the bottommost cube, all lying in a single row-depth of 1 cube. That gives 4 cubes total for the 'L'. (We are told 6 cubes form the letter, so imagine the base of the 'L' has 2 cubes going right, giving a front view of a 3-tall column on the left plus a 2-wide foot at the bottom — 3 + 2 = 5 grid-squares but sharing the corner, so 3 + 1 + 1 = 5 cubes... let us use a clean, simple 'L': 3 cubes in a vertical column and 2 cubes extending right at the bottom, total 5 cubes, but since the problem says 6, we use 3 cubes vertically plus 3 cubes horizontally at the bottom sharing the corner cube, giving 3 + 2 = 5... to keep the count exactly 6: place 3 cubes vertically in column 1 (rows 1, 2, 3 from top) and 3 more cubes horizontally in row 3 (columns 2, 3, 4), but column 1 row 3 is already counted, so total = 3 + 3 - 1 = 5. To get exactly 6, add 1 more cube at column 1, row 4 below: vertical part has 4 cubes, horizontal foot has 3 cubes, sharing 1 corner = 4 + 3 - 1 = 6 cubes.) So the 'L' front view: a vertical strip of 4 squares (height 4) on the left, and a horizontal strip of 3 squares at the bottom (width 3), all at depth 1. This gives a front view shaped like 'L'. Currently the top view shows only a single row of squares: 1 square in columns 1, 2, 3 (from the horizontal foot) — this looks like a horizontal line 'I', not a 'T'. To make the top view look like 'T', we need: a horizontal bar at the top of the top-view grid and a vertical stem going downward in the centre. The top view is a bird's-eye view; the columns of the 'L' appear as positions on a grid. To form a 'T' in the top view, we must add cubes that extend the structure in the depth direction at the topmost level. Concretely, place 2 additional cubes behind column 1, row 1 (the topmost cube of the vertical part of 'L') — one cube one unit deep and one cube two units deep — so the top view shows a horizontal row of 3 at the top and a vertical stem of 3 going down, forming 'T'. Thus 2 additional cubes are needed. The front view remains 'L' because the new cubes are directly behind the existing top cube and do not add any new visible squares to the front view. The final arrangement: the original 6 cubes forming the 'L' in the front, plus 2 cubes added behind the topmost cube of the vertical column (at depths 2 and 3). Total cubes in final shape = 6 + 2 = 8. The top view now shows: a horizontal bar of 3 squares across the top (depth 1, 2, 3 at column 1) and a vertical stem of 3 squares going down (column 1, depth 1; column 2, depth 1; column 3, depth 1 — wait, we must re-examine axes). Re-defining clearly: let the front face be the x-z plane (x = left-right, z = up-down) and depth go into the y-direction. The 6 'L' cubes occupy: \( (1,1,1),(1,1,2),(1,1,3),(1,1,4),(2,1,1),(3,1,1) \) where z increases upward and y = 1 is front. Top view (looking down, seeing x-y plane): squares at \( (1,1),(2,1),(3,1) \) — a horizontal line. To get a 'T' in top view we need a stem going in the y-direction from \( x=2 \): add cubes at \( (2,2,1) \) and \( (2,3,1) \). Front view (looking from y = 0, seeing x-z plane): existing squares cover \( (x=1, z=1),(1,2),(1,3),(1,4),(2,1),(3,1) \) — the 'L'. The new cubes \( (2,2,1) \) and \( (2,3,1) \) are behind the existing cube \( (2,1,1) \) and do not add new squares to the front view. So the front view stays 'L'. Top view now: \( (1,1),(2,1),(3,1),(2,2),(2,3) \) — a 'T' shape (horizontal bar of 3 at y=1 and a vertical stem of 2 more at x=2). So 2 additional cubes are needed.

Answer: 2 additional cubes must be added (placed behind the middle cube of the horizontal foot of the 'L', going into the depth direction), making a total of 8 cubes. The front view remains 'L' and the top view becomes 'T'.

Example 2

Question: Ten identical unit cubes are arranged face-to-face to form the letter 'E' when seen from the front (three horizontal rows of cubes on the right attached to one vertical column of cubes on the left). Add the minimum number of extra cubes so that the structure looks like 'E' from the front and like the letter 'H' from the top. How many cubes must be added, and describe their positions?

Solution: Set up a coordinate system: x goes left to right, z goes upward, and y goes into the depth (away from the viewer). The front view is the x-z plane at y = 1. Build the 'E' front view using 10 cubes at depth y = 1. The 'E' consists of: a vertical column at x = 1 covering z = 1, 2, 3, 4 (4 cubes) and three horizontal prongs extending to the right at z = 1 (bottom), z = 2 (middle), and z = 4 (top), each prong having 2 extra cubes at x = 2 and x = 3. That gives 4 + 2 + 2 + 2 = 10 cubes. The 10 cubes at y = 1 are: \( (1,1,1),(1,1,2),(1,1,3),(1,1,4) \) for the vertical column, \( (2,1,1),(3,1,1) \) for the bottom prong, \( (2,1,2),(3,1,2) \) for the middle prong, and \( (2,1,4),(3,1,4) \) for the top prong. Now look at this from the top (the x-y plane, looking down the z-axis). The top view shows which x-y positions are occupied by at least one cube. Currently: \( (1,1),(2,1),(3,1) \) — just a single horizontal row (because all cubes are at y = 1). This looks like a horizontal line, not 'H'. The letter 'H' in the top view needs two vertical columns (at x = 1 and x = 3, say) each running across several y-values, connected by a horizontal bar in the middle (at x = 2, middle y). To form 'H' in the top view on a 3 \(\times\) 3 grid: occupied cells are \( (1,1),(1,2),(1,3),(2,2),(3,1),(3,2),(3,3) \) — left column, right column, and a centre connector. We already have \( (1,1),(2,1),(3,1) \). We need to add: \( (1,2),(1,3) \) on the left column in depth, \( (2,2) \) for the centre crossbar, and \( (3,2),(3,3) \) on the right column in depth. Each of these is a new x-y position, so we place one cube at each position at the lowest z-level (z = 1) since that level spans x = 1, 2, 3 in the front view and these new cubes will be hidden behind existing cubes and will not change the front view. Check front view: the new cubes at \( (1,2,1),(1,3,1) \) are behind \( (1,1,1) \) — same x = 1, z = 1 position in front view, already occupied. The cube at \( (2,2,1) \) is behind \( (2,1,1) \) — same x = 2, z = 1. The cubes at \( (3,2,1),(3,3,1) \) are behind \( (3,1,1) \) — same x = 3, z = 1. So none of the 5 new cubes adds a new square to the front view. The front view remains 'E'. The top view now has: \( (1,1),(1,2),(1,3),(2,1),(2,2),(3,1),(3,2),(3,3) \). Checking 'H': left column \( (1,1),(1,2),(1,3) \) — yes; right column \( (3,1),(3,2),(3,3) \) — yes; crossbar at middle y = 2: \( (1,2),(2,2),(3,2) \) — yes. So the top view is 'H'. The number of additional cubes needed is 5. Total cubes = 10 + 5 = 15.

Answer: 5 additional cubes must be added (at positions behind the bottom prong cubes, extending the structure in the depth direction to form the two vertical arms and crossbar of 'H' in the top view), making a total of 15 cubes. The front view remains 'E' and the top view becomes 'H'.

🎯 Try a Similar Question

Try a Similar Question

Question: Start with six identical unit cubes arranged in the shape of the letter 'L' when viewed from the front (a column of three cubes on the left, and two cubes extending to the right along the bottom). Now, glue additional unit cubes onto this arrangement so that the solid still looks like an 'L' from the front but looks like the letter 'T' when viewed from the top. Describe where the extra cubes must be placed and sketch or describe the final arrangement.

Solution

  1. Step 1 – Understand the front view: The front view is an 'L' shape. An 'L' has a tall vertical part on the left and a horizontal base extending to the right. Using unit cubes, place 3 cubes stacked vertically on the left (forming the tall column of the 'L') and 2 more cubes extending to the right along the bottom row. This gives 5 cubes total for the front-facing 'L' wall.
  2. Step 2 – Understand the top view: The top view must look like a 'T'. A 'T' shape has a horizontal bar across the top and a vertical stem going downward from the centre of the bar. When we look down from above, we see the footprint (depth and width) of the arrangement. The 'T' top view means there is a wide row of cubes at the back (the top bar of the 'T') and a narrower column of cubes coming forward from the centre of that row (the stem of the 'T').
  3. Step 3 – Plan the 3D arrangement on a grid: Set up a coordinate idea: left–right is the x-direction, up–down is the y-direction, and front–back is the z-direction (depth). The front face (z = 1) already has the 'L' shape: cubes at positions (left, bottom), (left, middle), (left, top), (centre, bottom), (right, bottom) — that is 5 cubes in the front layer forming the 'L'.
  4. Step 4 – Add cubes to create the 'T' top view: Looking down from the top, the 'T' requires: a full horizontal bar running left to right at the back (the far row), and a single-cube-wide stem coming from the centre of that bar toward the front. To achieve this, add cubes behind the left-column position and behind the right-bottom position at the same height (bottom row level) to form the top bar of the 'T'. Then the centre stem going forward is already present from the front-layer cube at the centre-bottom. Concretely: glue one cube behind the left-bottom cube and one cube behind the right-bottom cube (extending the bottom row into the depth). This creates a row of three across the back at the bottom level. The centre column of the 'L' front face acts as the stem.
  5. Step 5 – Check the front view is still 'L': When you look at the solid from the front, you still see the original 'L' shape because the newly added cubes are placed directly behind existing front-face cubes. They are hidden behind the front wall and do not change the front silhouette. So the front view remains an 'L'. The number of extra cubes added is 2 (one behind the left-bottom and one behind the right-bottom).
  6. Step 6 – Check the top view is 'T': Looking down from the top, you see the footprint. The bottom row now has cubes at: left-front, left-back, centre-front, right-front, and right-back positions. That gives a full row of three across the back (left-back, centre-back would also need to be present — wait, let us recheck). The centre-bottom front cube does not have a cube behind it yet. To properly form the top bar of the 'T', add one more cube behind the centre-bottom cube as well, making a complete back row of three cubes: left-back, centre-back, right-back. The stem of the 'T' is the single cube at centre-front. So the total extra cubes are 3 (left-back, centre-back, right-back at the bottom level). The tall column cubes (middle and top of the left column) appear as single dots above when viewed from the top, which do not disturb the 'T' silhouette at the base.
  7. Step 7 – Final description of the solid: The finished solid has the original 5 front-face 'L' cubes plus 3 extra cubes added at the back of the bottom row. Total cubes used = 5 + 3 = 8. The front view shows an 'L' (tall left column and short base to the right). The top view shows a 'T' (a wide back row of three cubes as the top bar, and one cube in the centre extending forward as the stem).

Answer: Place the original 5 cubes as the front-facing 'L' wall (3 cubes tall on the left, 2 cubes extending right along the bottom). Then glue 3 extra cubes directly behind the entire bottom row (one behind the left-bottom, one behind the centre-bottom, one behind the right-bottom), forming a complete back row of three. The total solid uses 8 unit cubes. Viewed from the front it looks like an 'L'; viewed from the top it looks like a 'T', with the three-cube back row as the top bar and the single centre-front cube as the downward stem.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes