SOLVER7 Study. Nothing Else.
Figure It Out 6 Q1

In addition to the \(5\) ways shown in Fig. \(4.8,\) are there any additional ways of gluing four cubes together along faces\(?\) Can you visualise and draw these as well\(?\)

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have four small toy blocks. You can arrange them flat on a table in five different ways, like puzzle pieces. But blocks are not just flat — you can also stack one on top of another! When you lift a block up into a second layer, you get brand new shapes that cannot lie flat. There are three such stacked shapes possible. So altogether, four cubes can be joined face-to-face in eight totally different ways.

Answer: Yes, there are additional ways. Besides the 5 flat arrangements in Fig. 4.8, we can make 3 more shapes by stacking a cube into a second layer: a 3D corner (L with one cube raised), a twisted screw shape (which has a left and right mirror version), and a tripod shape (three cubes around one central cube in three directions). In total there are 8 different ways to glue four cubes together along faces.

📖 Gluing Four Cubes Together

Detailed Explanation

When we glue four identical cubes together face to face, each shape we build is called a tetracube. Two shapes are counted as the same if one can be turned over or rotated in space to look exactly like the other. Figure 4.8 shows five flat shapes, where all four cubes lie in a single layer (they sit on the table like flat tiles). But cubes are 3D objects, so we are allowed to stack a cube on top of another cube, not only place them side by side. The moment we allow one cube to sit in a second layer, we get brand new shapes that could not be drawn as flat tiles. So yes, there are extra ways beyond the five flat ones.

Formula Used

There is no numerical formula here. The counting rule is: two arrangements are the SAME if one can be rotated or flipped in 3D to match the other, otherwise they are DIFFERENT.

Solution

  1. Step 1: Understand what Fig. 4.8 shows. All five pictures (i) to (v) are flat arrangements. Every one of the four cubes rests on the table in a single layer. Shape (i) is a straight line of 4, (ii) is a 2 by 2 square, (iii) and (iv) are L or S type bends, and (v) is a T type shape. These are the flat tetracubes.
  2. Step 2: Realise the key idea. A cube is three dimensional, so we do not have to keep all four cubes flat on the table. We can lift one cube and glue it on TOP of another cube. This creates a second layer. Such shapes cannot appear in the flat pictures of Fig. 4.8, so they are genuinely new.
  3. Step 3: Build the first new (non-flat) shape. Take three cubes in an L shape lying flat, then place the fourth cube standing up on the corner cube. This gives a 3D corner piece. It is like a staircase corner and cannot be flattened into any of the 5 given shapes.
  4. Step 4: Build a second new shape, the 3D screw or twist shape. Place two cubes flat side by side, then place two more cubes on top but shifted, so the top pair is turned at a right angle to the bottom pair. This chiral (twisted) shape has a left-handed and a right-handed version that cannot be rotated into each other, so it counts as new.
  5. Step 5: Build a third new shape, the tripod or branch shape. Take one central cube and glue one cube on three of its faces going in three different directions of space (for example right, forward, and up). This branching shape uses all three dimensions and is clearly not flat.
  6. Step 6: Count everything. The 5 shapes in Fig. 4.8 are the flat tetracubes. The extra non-flat (solid) tetracubes number 3, and one of them (the twist) comes as a mirror pair. Adding these 3 new solid shapes to the 5 flat ones gives a total of 8 different ways of gluing four cubes together.

Final Answer

Yes, there are additional ways. Besides the 5 flat arrangements in Fig. 4.8, we can make 3 more shapes by stacking a cube into a second layer: a 3D corner (L with one cube raised), a twisted screw shape (which has a left and right mirror version), and a tripod shape (three cubes around one central cube in three directions). In total there are 8 different ways to glue four cubes together along faces.

Common Mistake

A common mistake is to think only about flat, table-top arrangements and conclude that only 5 shapes exist. Students forget that cubes are 3D, so a cube can also be stacked on TOP of another, creating a second layer and giving new shapes that cannot be drawn flat.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify what Fig. 4.8 is actually showing. All five shapes (i) through (v) in Fig. 4.8 are flat, meaning every one of the four cubes sits in a single layer on the table — none is lifted above the others. Shape (i) is a straight row of 4 cubes, (ii) is a 2-by-2 square block, (iii) is an L-bend, (iv) is an S-bend, and (v) is a T-shape. — Reason: We need a clear starting point so we know exactly which shapes are already counted before we look for new ones.
  2. Step 2: Recognise the key idea: cubes are 3-dimensional objects. Nothing in the problem says all four cubes must lie flat on the table. We are allowed to glue a cube on TOP of another cube, creating a second layer. Any shape that uses a second layer cannot possibly look like one of the five flat shapes in Fig. 4.8, so it is automatically a brand-new arrangement. — Reason: Identifying this freedom is what opens the door to finding extra shapes beyond the five flat ones.
  3. Step 3: Build the first new shape — the 3-D corner (also called the right-screw or L-tower). Start with three cubes placed in an L-shape on the table (two cubes in a row, then one cube turning the corner). Now take the fourth cube and place it directly on top of the cube sitting at the corner. The result is an L lying flat with one arm raised into the air. This shape cannot be laid flat to match any of the five shapes in Fig. 4.8. — Reason: This is the simplest way to move one cube into a second layer, and it produces a genuinely new tetracube.
  4. Step 4: Build the second new shape — the twisted screw. Place three cubes in a straight row on the table. Now attach the fourth cube on top of one of the two end cubes, but slide it to the side so it overhangs to the left (or to the right). This creates a spiral or twisted staircase effect. Importantly, the left-twisted version and the right-twisted version are mirror images of each other, and no rotation in 3D can turn one into the other, so they are counted as ONE distinct shape (since the problem counts mirror images as the same shape in most standard references, but note that some references count them as two — in the standard NCERT/textbook treatment they are considered one shape here). — Reason: The twist introduced by placing the fourth cube beside-and-above an end cube creates a non-flat arrangement that is different from the 3-D corner built in Step 3.
  5. Step 5: Build the third new shape — the tripod. Place one cube flat on the table as the central cube. Now attach three more cubes to this central cube, one going forward, one going to the right, and one going straight up. Each of the three added cubes shares exactly one face with the central cube, and the three added cubes point in three mutually perpendicular directions. No rotation can make this look like any shape found in Steps 3 or 4, or any shape in Fig. 4.8. — Reason: The tripod is the only arrangement where one cube is surrounded by three others in three different spatial directions, making it unique among all tetracubes.
  6. Step 6: Count all distinct tetracubes. From Fig. 4.8 we have 5 flat shapes. From Steps 3, 4, and 5 we found 3 non-flat shapes. The total is therefore 5 + 3 = 8 distinct tetracubes. — Reason: Combining both flat and non-flat arrangements gives the complete count, confirming that the answer to the question is yes, there are additional ways beyond the five shown.

Final Answer

Yes, there are additional ways. Besides the 5 flat arrangements in Fig. 4.8, we can make 3 more shapes by stacking a cube into a second layer: a 3D corner (L with one cube raised), a twisted screw shape (which has a left and right mirror version), and a tripod shape (three cubes around one central cube in three directions). In total there are 8 different ways to glue four cubes together along faces.

Common Mistake

One common mistake: students assume all four cubes must stay flat on the table (like flat tiles), so they miss all three non-flat shapes. Always remember that cubes are 3-dimensional and a fourth cube can be stacked on top of any face of an existing cube, not just placed beside it.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Flat tetracubes (all 4 cubes in one layer) from Fig. 4.8: straight line, 2×2 square, L-shape, S-shape, T-shape — total 5 flat shapes.
  2. Step 2: 3D (non-flat) tetracubes formed by lifting one cube to a second layer: (a) 3D corner, (b) screw/twist (left-hand and right-hand versions count as one since they are mirror images treated as distinct in some counts, but as one 3D shape type), (c) tripod — total 3 new shapes.
  3. Step 3: Grand total: \( 5 + 3 = 8 \) distinct tetracubes.

Answer: Yes, there are additional ways. Besides the 5 flat arrangements in Fig. 4.8, we can make 3 more shapes by stacking a cube into a second layer: a 3D corner (L with one cube raised), a twisted screw shape (which has a left and right mirror version), and a tripod shape (three cubes around one central cube in three directions). In total there are 8 different ways to glue four cubes together along faces.

➕ More Examples

More Examples

Example 1

Question: Three unit cubes are to be joined together along full faces (face-to-face). How many distinct arrangements (tricubes) are possible? List and describe each arrangement, explaining why no two are the same.

Solution: We need to join 3 unit cubes face-to-face and find all arrangements that look different even after rotating or flipping. \nStart with Cube A. Attach Cube B to any face of Cube A — all such single attachments are identical by rotation, so we have a row of 2 cubes. \nNow attach Cube C to the pair. The possible positions for Cube C are: \nArrangement 1 — Straight line: Place Cube C on the far end of Cube B (continuing the row). All 3 cubes are in a straight line: A–B–C. \nArrangement 2 — L-shape (bent): Place Cube C on a side face of Cube B (any face not along the A–B axis). This creates a right-angle bend. The result looks like the letter L. \nAny other placement of Cube C can be rotated or reflected to match one of these two arrangements. \nFor example, placing Cube C on the top of Cube B gives the same L-shape as placing it on the side, because we can rotate the whole structure. \nSo there are exactly 2 distinct tricubes: 1. The straight (1 \times 1 \times 3) rod. 2. The L-shaped (bent) tricube. \nThese two shapes cannot be rotated into each other because the straight rod has all three cubes collinear, while the L-shape has a 90-degree turn.

Answer: There are exactly 2 distinct arrangements of 3 cubes joined face-to-face: (1) the straight rod, and (2) the L-shaped (bent) tricube.

Example 2

Question: Five unit cubes are joined face-to-face. One known arrangement is a straight row of 5 cubes in a line. Another is the shape where 4 cubes form a straight row and the 5th cube is attached to a side face of the 2nd cube from one end (an L-pentacube). Describe a THIRD distinct arrangement of 5 cubes, explain why it is different from the two mentioned, and also determine the total surface area of the straight-row arrangement, given each unit cube has a side length of 1 unit.

Solution: Part 1 — Finding a third distinct arrangement of 5 unit cubes: \nArrangement 1 (given): Straight row — all 5 cubes in a line (1 \times 1 \times 5). \nArrangement 2 (given): L-shape — 4 cubes in a row, 5th cube on the side face of cube 2 from one end. \nArrangement 3 — T-shape: Place 3 cubes in a straight row (Cubes 1, 2, 3). Then attach one cube to a side face of Cube 2 (the middle cube) going in one direction, and another cube to the opposite side face of Cube 2 going the other direction. This gives a T or plus-cross shape where the middle cube has 4 neighbours (left, right, front, back in the row plane), with 2 cubes extending perpendicular to the original row of 3. \nWhy it is different: - In Arrangement 1, every cube has at most 2 neighbours. In Arrangement 3, the central cube has 4 neighbours — this structural difference cannot be removed by any rotation. - In Arrangement 2, the maximum number of neighbours any single cube has is 2 (a corner cube). In Arrangement 3, the central cube has 4 neighbours. So Arrangement 3 is genuinely distinct from both. \nPart 2 — Surface area of the straight-row arrangement: \nIn a straight row of 5 unit cubes, each cube shares 2 faces with its neighbours, except the two end cubes which each share only 1 face. \nTotal faces on 5 separate cubes: \[5 \times 6 = 30 \text{ faces}\] \nEach shared junction hides 2 faces (one from each cube). There are 4 junctions in a row of 5 cubes. \nFaces hidden: \[4 \times 2 = 8 \text{ faces}\] \nExposed (surface) faces: \[30 - 8 = 22 \text{ faces}\] \nSince each face has area \( 1 \times 1 = 1 \) square unit, the total surface area is \[22 \times 1 = 22 \text{ square units}\]

Answer: A valid third distinct arrangement is the T-shape (3 in a row with 1 cube on each side of the middle cube). The surface area of the straight row of 5 unit cubes is 22 square units.

🎯 Try a Similar Question

Try a Similar Question

Question: Three identical unit cubes are to be glued together so that each cube shares at least one complete face with another cube. How many distinct solid shapes (called 'tromino cubes') can be formed this way? Remember that two shapes are the same if one can be rotated to look exactly like the other. List and briefly describe each distinct shape.

Solution

  1. Step 1 – Understand the Rules: We have 3 identical unit cubes. Each cube must touch at least one other cube along a complete face. Two arrangements are counted as the same if one can be physically rotated (turned in 3D space) to match the other exactly. We need to find all arrangements that cannot be made to look alike by any rotation.
  2. Step 2 – Start with Two Cubes: First, glue two cubes together face-to-face. There is only one way to do this (a 1×1×2 bar), because all faces of a cube are identical and any two-cube arrangement can be rotated to look the same.
  3. Step 3 – Add the Third Cube to the Two-Cube Bar: The two-cube bar has several faces where the third cube can be attached. By symmetry, the possible positions for the third cube fall into just two distinct cases: Case 1 – Straight line: Attach the third cube to one of the two free end-faces of the bar (continuing the bar in the same direction). This gives a 1×1×3 straight rod. Case 2 – Right-angle bend: Attach the third cube to any of the four side-faces of one end cube (turning at a right angle). This gives an L-shaped (or bent) arrangement.
  4. Step 4 – Check Whether the L-Shape Has Variants: In 3D, an L-shape made of 3 cubes can be rotated so that any particular bend direction matches any other bend direction. There is no 'left' or 'right' version at this stage because in 3 dimensions the shape and its mirror image can both be rotated to look the same (unlike with 4 cubes, where a screw shape can be left- or right-handed). Therefore all L-shaped arrangements of 3 cubes are identical up to rotation.
  5. Step 5 – Count the Distinct Shapes: From Steps 3 and 4, there are exactly 2 distinct tromino-cube shapes: Shape 1 – The Straight Rod: All three cubes in a single straight line (a 1×1×3 bar). Shape 2 – The L-Shape (Right-Angle Bend): Two cubes in a line with the third cube attached at a right angle to one end, making an L.
  6. Step 6 – State the Final Answer: There are exactly 2 distinct ways to glue three unit cubes together face-to-face: (i) the straight 1×1×3 rod, and (ii) the L-shaped (right-angle) piece.

Answer: There are exactly 2 distinct solid shapes that can be formed by gluing three unit cubes face-to-face: (1) the Straight Rod — all three cubes joined in a single straight line to form a 1×1×3 bar, and (2) the L-Shape — two cubes joined in a line with the third cube attached at a right angle to one end. Any other arrangement can be rotated to match one of these two shapes.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes