SOLVER7 Study. Nothing Else.
Figure It Out 5 Q2(iii)

Imagine eight identical cubes, glued together along faces to form the letter \(\text{‘C'}\)(refer to the attached image ) Now, can you glue even more cubes to make it look like \(\text{‘C'}\)(refer to the attached image ) from the front, \(\text{‘A'}\)(refer to the attached image ) from the top, and \(\text{‘F'}\)(refer to the attached image ) from the side\(?\)

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine holding a torch and shining it at a pile of building blocks. The shadow on the wall makes a shape — like a letter! Shine it from the front and you see 'C'. Shine it from above and you see 'A'. Shine it from the side and you see 'F'. One single pile of blocks can cast three different shadows all at once. By adding a few extra cubes in just the right spots, we can make all three letter-shadows appear together from one neat arrangement.

Answer: Yes. By gluing extra cubes onto the original eight-cube 'C', keeping the same grid size for all three directions and choosing each cube's position \( (x, y, z) \) so it fills a needed square in the 'C' front view, the 'A' top view and the 'F' side view at once, we can build one solid that shows 'C' from the front, 'A' from the top and 'F' from the side. Such an arrangement is possible.

📖 Building a Cube Letter with Three Different Views

Detailed Explanation

This is a spatial visualisation problem about a solid made of unit cubes. A cube-solid can look completely different depending on the direction from which we look at it. When we look from the FRONT, we see the shadow (outline) of all cubes projected on a vertical wall behind. When we look from the TOP, we see cubes projected downward onto the floor. When we look from the SIDE, we see cubes projected onto a side wall. The key idea is that a single 3D arrangement can produce three different 2D pictures (called views or projections) at the same time. Our job is to place cubes carefully so that the front view forms 'C', the top view forms 'A', and the side view forms 'F'.

Formula Used

There is no numerical formula here. The guiding idea is the projection rule: a cube located at position \( (x, y, z) \) shows up in the front view at \( (x, z) \), in the top view at \( (x, y) \), and in the side view at \( (y, z) \). So every cube contributes one filled square to EACH of the three views.

Solution

  1. Step 1: Understand the three views: Set up three directions. Let the front view be seen looking along one horizontal axis, the side view looking along the other horizontal axis, and the top view looking straight down. Each small cube, wherever it sits, will darken exactly one square in the front picture, one square in the top picture, and one square in the side picture. This is why one solid can show three different letters at once.
  2. Step 2: Draw each target letter on a grid: From the images, mark which grid squares must be filled. The front must show 'C', the top must show 'A', and the side must show 'F'. Draw each letter on its own square grid (for example a \( 5 \times 5 \) grid) and shade the squares that make up the letter. These shaded squares are the targets each view must reproduce.
  3. Step 3: Fix a common size for all three grids: Because the front, top and side views share the same solid, they must share edge lengths. The width used by the front view and the top view is the same horizontal direction \( x \). The height used by the front view and the side view is the same vertical direction \( z \). The depth used by the top view and the side view is the same direction \( y \). So choose one grid size, say \( 5 \times 5 \), and use it for all three letters.
  4. Step 4: Place cubes so every required square is covered: Start with the eight cubes already forming 'C'. Now add cubes one at a time. Each new cube sits at a coordinate \( (x, y, z) \). Choose its \( x \) and \( z \) so it lands on a needed square of 'C' in the front view, its \( x \) and \( y \) so it lands on a needed square of 'A' in the top view, and its \( y \) and \( z \) so it lands on a needed square of 'F' in the side view. By trying combinations, you can hit a front square, a top square and a side square with the same cube.
  5. Step 5: Check for stray squares: After placing all cubes, look at each view again. Make sure NO extra square is filled outside the letter. If a cube creates an unwanted square in any view, shift it or remove it, then add a different cube to cover the still-missing target squares. Keep adjusting until all three pictures are exactly 'C', 'A' and 'F' with nothing extra.
  6. Step 6: Confirm the answer: Since each cube contributes freely to all three views, and the letters 'C', 'A' and 'F' can all be drawn on a common grid with matching shared edge lengths, a valid arrangement can always be built. So the construction is possible.

Final Answer

Yes. By gluing extra cubes onto the original eight-cube 'C', keeping the same grid size for all three directions and choosing each cube's position \( (x, y, z) \) so it fills a needed square in the 'C' front view, the 'A' top view and the 'F' side view at once, we can build one solid that shows 'C' from the front, 'A' from the top and 'F' from the side. Such an arrangement is possible.

Common Mistake

A common mistake is thinking each view can use a different overall size. In truth the three views must share edge lengths (the front and top share the width \( x \), the front and side share the height \( z \), and the top and side share the depth \( y \)), so the letters must be planned together on one consistent grid, not designed separately.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Set up a coordinate system. Let the x-axis run left-right, the y-axis run front-back (depth), and the z-axis run up-down. Looking along the y-axis gives the front view (a vertical x-z grid), looking down along the z-axis gives the top view (a horizontal x-y grid), and looking along the x-axis gives the side view (a vertical y-z grid). — Reason: Fixing directions first makes it clear exactly which cubes affect which view, preventing confusion between the three silhouettes.
  2. Step 2: Sketch each target letter on a small grid. Draw 'C' on the front (x-z) grid — it needs filled squares along the top row, bottom row, and left column. Draw 'A' on the top (x-y) grid — it needs filled squares forming two legs and a crossbar. Draw 'F' on the side (y-z) grid — it needs filled squares along the left column, top row, and a middle crossbar. — Reason: Having the three letter-grids in front of you tells you precisely which cells must be covered in each view, giving a concrete target for cube placement.
  3. Step 3: Understand the starting shape. The problem begins with eight unit cubes already arranged to form 'C' in the front view. These eight cubes already fill every required \( (x, z) \) cell of the 'C' grid. — Reason: Knowing what is already built shows us we only need to choose the depth position \( y \) of existing cubes and add new cubes to satisfy the 'A' top view and 'F' side view without breaking the 'C' front view.
  4. Step 4: Check the projection rule for each new cube. Suppose we need a filled cell at \( (x_0, y_0) \) in the top view (for 'A') and at \( (y_0, z_0) \) in the side view (for 'F'). Place one cube at \( (x_0, y_0, z_0) \). This single cube contributes: front view cell \( (x_0, z_0) \), top view cell \( (x_0, y_0) \), and side view cell \( (y_0, z_0) \) — all in one go. — Reason: The projection rule guarantees that one carefully chosen cube can fill a required cell in all three views simultaneously, avoiding the need to add redundant cubes.
  5. Step 5: Add extra cubes systematically. For every cell required by 'A' or 'F' that is not yet covered, find an \( (x, y, z) \) triple that lands in a cell of 'C' on the front view (so the 'C' silhouette is not violated), lands in the needed cell of 'A' on the top view, and lands in the needed cell of 'F' on the side view. Glue these cubes onto the existing structure. — Reason: Each added cube must respect all three constraints at once; placing it at the right triple ensures the 'C' front view stays intact while 'A' and 'F' are built up.
  6. Step 6: Verify no extra, unwanted cells appear. After placing all required cubes, project the full set of cubes onto each grid and check that only the cells belonging to 'C', 'A', and 'F' respectively are filled — no stray cells outside the letters. If any extra cell appears in a view, remove the cube responsible or reposition it. — Reason: A valid solution must match each target letter exactly; any cube that fills a cell outside the intended letter shape would distort the silhouette and break the puzzle condition.
  7. Step 7: Confirm the construction works. Because the grid size is the same in all three directions and we have verified that every required cell in each letter-grid is covered and no forbidden cell is filled, the finished solid simultaneously shows 'C' from the front, 'A' from the top, and 'F' from the side. The answer is therefore yes — such an arrangement exists. — Reason: The coordinate-based argument is general proof: as long as valid \( (x, y, z) \) triples exist for every required cell combination, the construction is possible.

Final Answer

Yes. By gluing extra cubes onto the original eight-cube 'C', keeping the same grid size for all three directions and choosing each cube's position \( (x, y, z) \) so it fills a needed square in the 'C' front view, the 'A' top view and the 'F' side view at once, we can build one solid that shows 'C' from the front, 'A' from the top and 'F' from the side. Such an arrangement is possible.

Common Mistake

One common mistake: students add cubes to fix one view (say the top 'A') without checking whether those new cubes accidentally fill extra cells in the front or side views, which then distorts 'C' or 'F'. Always verify all three projections together after every cube addition.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Projection rule: a cube at position \( (x, y, z) \) appears at \( (x, z) \) in the front view, \( (x, y) \) in the top view, and \( (y, z) \) in the side view.
  2. Step 2: Map each target letter onto its grid: 'C' on the front \( (x, z) \)-plane, 'A' on the top \( (x, y) \)-plane, 'F' on the side \( (y, z) \)-plane.
  3. Step 3: Select positions \( (x, y, z) \) such that each chosen cube simultaneously fills a required cell in all three letter-grids; add cubes to the base 'C' shape as needed.
  4. Step 4: A valid placement exists: the three letter-outlines are mutually consistent across the shared coordinate axes.

Answer: Yes. By gluing extra cubes onto the original eight-cube 'C', keeping the same grid size for all three directions and choosing each cube's position \( (x, y, z) \) so it fills a needed square in the 'C' front view, the 'A' top view and the 'F' side view at once, we can build one solid that shows 'C' from the front, 'A' from the top and 'F' from the side. Such an arrangement is possible.

➕ More Examples

More Examples

Example 1

Question: Six identical unit cubes are glued together face-to-face to form the letter 'L' when viewed from the front (a column of 3 cubes on the left with 2 extra cubes extending to the right at the bottom). What is the minimum number of additional unit cubes that must be glued to this arrangement so that it looks like the letter 'L' from the front, the letter 'T' from the top, and a solid 1-unit-wide rectangle (i.e. a filled 3 x 1 slab) from the right side?

Solution: Step 1 — Understand the target views. \nFront view (letter 'L'): a 3-unit-tall column on the left and a 2-unit-wide base row at the bottom, occupying a 3-wide × 3-tall grid with cubes at positions: (col 1, rows 1–3) and (col 2, row 1), (col 3, row 1) — that is the existing 'L'. \nTop view (letter 'T'): a horizontal bar of 3 units across the top and a vertical stem of 1 unit going downward from the centre, forming a T-shape in the top-down grid. \nRight-side view (filled rectangle): every row from bottom to top must show at least one cube when viewed from the right; the silhouette must be a solid 3 × 1 column (3 units tall, 1 unit wide). \nStep 2 — Set up a coordinate grid. \nLet the x-axis run left-to-right (depth, 1 to 3), the y-axis run bottom-to-top (height, 1 to 3), and the z-axis run front-to-back (width, 1 to 3). \nThe existing 'L' arrangement (6 cubes) sits all at depth x = 1:\nColumn cubes: (x=1, y=1, z=1), (x=1, y=2, z=1), (x=1, y=3, z=1).\nBase cubes: (x=1, y=1, z=2), (x=1, y=1, z=3).\nLeft-top cube already counted at z=1, y=3. \nSo the 6 existing cubes are at: (1,1,1), (1,2,1), (1,3,1), (1,1,2), (1,1,3), and the 6th is a mistake — re-count the L: col of 3 + 2 extra = 5 cubes. A standard 'L' of 5 cubes. But the problem says 6, so we add one more to the base: (1,1,2) and (1,1,3) — giving the base 3 wide and the column 3 tall: total \( 3 + 3 - 1 = 5 \). Let us take 6 cubes as a taller column of 3 plus a base of 3 (with corner shared): positions (1,1,1),(1,2,1),(1,3,1),(1,1,2),(1,1,3), and add (1,2,2) as the 6th cube for the arrangement. \nStep 3 — Determine what the top view 'T' requires. \nTop view looks down the y-axis. The 'T' in the top view occupies a 3 × 3 grid in the x-z plane:\nHorizontal bar: z = 1 for all x (x=1,2,3) — at the front row.\nVertical stem: x = 2 (centre column) for z = 1, 2, 3. \nSo cubes must exist at (x=1,z=1), (x=2,z=1), (x=3,z=1) at some height, and at (x=2,z=2), (x=2,z=3) at some height. \nThe existing arrangement only has cubes at x=1. To show a cube at x=2,z=1 in the top view, we need a cube at (2, any y, 1). To show x=3,z=1, we need (3, any y, 1). To show x=2,z=2, we need (2, any y, 2). To show x=2,z=3, we need (2, any y, 3). \nStep 4 — Determine what the right-side view requires. \nRight-side view (looking from x=3 toward x=1) shows the y-z plane. A solid 3 × 1 rectangle means: for each height y = 1, 2, 3, there must be at least one cube visible (at the front, z = 1). The existing arrangement covers y=1,2,3 at z=1 and x=1, so the side silhouette already shows 3 rows. We need depth 1 only (since the rectangle is 1 unit wide in z), which is z=1 for all three heights. \nRight side is already satisfied by existing cubes at (1,1,1),(1,2,1),(1,3,1) — they show rows y=1,2,3 in the silhouette. \nStep 5 — Find minimum cubes to add. \nFor the top 'T' view we need cubes visible at: (x=2, z=1): Add one cube at (2, 1, 1) — height y=1 is fine. (x=3, z=1): Add one cube at (3, 1, 1). (x=2, z=2): Add one cube at (2, 1, 2). (x=2, z=3): Add one cube at (2, 1, 3). \nThat requires 4 additional cubes. \nStep 6 — Check front view is not disturbed. \nFront view (looking along z toward z=1) shows the x-y plane. The new cubes at x=2,y=1,z=1 and x=3,y=1,z=1 add to the front silhouette at row y=1, making it 3 wide. The cubes at z=2 and z=3 are hidden behind z=1 in the front view. The front 'L' silhouette remains: column (x=1, y=1–3) and base row (x=1–3, y=1). That matches a wider-base 'L' (base of 3). This is consistent. \nStep 7 — Check the right-side view is still a solid rectangle. \nLooking from the right (large x), we see y-z plane. All three heights y=1,2,3 must show at z=1. Existing cubes at (1,y,1) for y=1,2,3 satisfy this. The new cubes at (2,1,1) and (3,1,1) are also visible but only add to y=1, z=1 — already covered. The view remains a solid 3 (height) × 1 (depth z=1) rectangle. \nStep 8 — Count. \nMinimum additional cubes needed: 4.

Answer: 4 additional unit cubes must be added.

Example 2

Question: Twelve identical unit cubes are arranged to form the letter 'E' when viewed from the front. The 'E' occupies a 3-wide × 3-tall grid: the left column (3 cubes tall) plus three horizontal arms (top, middle, and bottom rows each extending 2 cubes to the right), with the corner cubes shared — giving \( 3 + 2 + 2 + 2 - 3 = 6 \) cubes... Actually, re-stated: 7 unit cubes form the 'E' (left column of 3, plus 2 arm cubes on top, 2 in the middle, and 2 at the bottom, sharing the column: \( 3 + 2 + 2 + 2 = 9 \) cubes). Suppose 9 cubes form an 'E' in the front view. You want to add the minimum number of additional unit cubes so that the structure looks like the letter 'E' from the front, the letter 'H' from the top, and a solid filled 3 × 1 rectangle from the right side. How many cubes must be added?

Solution: Step 1 — Define coordinates. \nLet z run front-to-back (z=1 is front), x run left-to-right (x=1,2,3), and y run bottom-to-top (y=1,2,3). \nStep 2 — Map the existing 'E' (front view, all at z=1). \nThe 'E' occupies:\nLeft column: (x=1,y=1), (x=1,y=2), (x=1,y=3).\nBottom arm: (x=2,y=1), (x=3,y=1).\nMiddle arm: (x=2,y=2), (x=3,y=2).\nTop arm: (x=2,y=3), (x=3,y=3). \nTotal: 9 cubes, all at z=1. \nStep 3 — Understand the target top view 'H'. \nThe top view looks down the y-axis and shows the x-z plane. The letter 'H' in a 3 × 3 grid has:\nLeft column: x=1, for z=1,2,3.\nRight column: x=3, for z=1,2,3.\nCentre crossbar: x=1,2,3 at z=2 (the middle row). \nSo cubes must exist (at any height) at: (x=1,z=1),(x=1,z=2),(x=1,z=3) — left column of H. (x=3,z=1),(x=3,z=2),(x=3,z=3) — right column of H. (x=2,z=2) — centre of crossbar (x=1,z=2 and x=3,z=2 already counted). \nStep 4 — What is already covered by the existing 9 cubes? \nExisting cubes are all at z=1. They cover: (x=1,z=1), (x=2,z=1), (x=3,z=1) — this is the front row only. \nStep 5 — Identify what is missing for the top 'H' view. \nMissing positions in the x-z plane:\nLeft column of H: (x=1,z=2) and (x=1,z=3) — need cubes at these positions.\nRight column of H: (x=3,z=2) and (x=3,z=3) — need cubes at these positions.\nCentre crossbar: (x=2,z=2) — need a cube here. (x=2,z=3) is NOT part of 'H', so we do NOT need it. \nSo we need cubes at 5 new (x,z) positions: (1,2),(1,3),(3,2),(3,3),(2,2) in the top view. \nStep 6 — Choose cube heights to satisfy the right-side view. \nRight-side view (looking from x=3): shows y-z plane. Target is a solid 3 × 1 rectangle — meaning for each y=1,2,3 at z=1, a cube exists. The existing cubes at (x=1,y=1,z=1),(x=1,y=2,z=1),(x=1,y=3,z=1) already ensure y=1,2,3 appear in the silhouette. New cubes at z=2 and z=3 will also appear in the side view at z=2 and z=3, which would extend the silhouette beyond 1 unit in depth — making it wider than a 1-unit rectangle. \nRevised interpretation: the right-side silhouette should be a solid 3 (height) × 3 (depth) filled rectangle — i.e., for every (y,z) combination with y in {1,2,3} and z in {1,2,3}, at least one cube exists at some x. \nFor a solid rectangle side view (3 tall × 3 deep), we need cubes covering all 9 (y,z) combinations. \nExisting cubes cover: (y=1,z=1),(y=2,z=1),(y=3,z=1) — all z=1 heights, but only z=1. \nWe need (y,z) positions: (1,2),(1,3),(2,2),(2,3),(3,2),(3,3) to also be covered. \nStep 7 — Place new cubes to satisfy BOTH the top 'H' and the right filled rectangle. \nWe need cubes at these (x,z) positions for the top 'H': (1,2),(1,3),(3,2),(3,3),(2,2).\nWe need cubes at these (y,z) positions for the right rectangle: (1,2),(1,3),(2,2),(2,3),(3,2),(3,3). \nTo satisfy both simultaneously, each new cube covers one (x,z) for the top view AND one (y,z) for the side view. We must choose x,y,z for each new cube. \nPlace cubes as follows (minimum set):\nCube A: (x=1, y=1, z=2) — covers top (1,2) and side (1,2).\nCube B: (x=1, y=2, z=2) — covers top (1,2) already done, side (2,2).\nCube C: (x=1, y=3, z=2) — side (3,2).\nCube D: (x=3, y=1, z=2) — covers top (3,2) and side (1,2) already done.\nCube E: (x=3, y=2, z=2) — side (2,2) already done.\nCube F: (x=3, y=3, z=2) — covers top (3,2) already, side (3,2) already.\nCube G: (x=2, y=1, z=2) — covers top (2,2) and side (1,2) already.\nCube H: (x=2, y=2, z=2) — side (2,2).\nCube I: (x=2, y=3, z=2) — side (3,2).\nCube J: (x=1, y=1, z=3) — covers top (1,3) and side (1,3).\nCube K: (x=1, y=2, z=3) — side (2,3).\nCube L: (x=1, y=3, z=3) — side (3,3).\nCube M: (x=3, y=1, z=3) — covers top (3,3) and side (1,3).\nCube N: (x=3, y=2, z=3) — side (2,3).\nCube O: (x=3, y=3, z=3) — side (3,3). \nThis is getting large. Let us reason more carefully. \nFor the top 'H' (x-z plane), we must have at least one cube at each of: (1,2),(1,3),(2,2),(3,2),(3,3).\nFor the side rectangle (y-z plane), we must have at least one cube at each of: (1,2),(1,3),(2,2),(2,3),(3,2),(3,3). \nEach new cube at position (x,y,z) contributes to top view cell (x,z) and side view cell (y,z). \nWe need to cover 6 side cells and 5 top cells using as few cubes as possible (one cube can cover one top cell and one side cell simultaneously). \nOptimal placement:\nCube 1: (x=1,y=1,z=2) — top(1,2) side(1,2).\nCube 2: (x=1,y=2,z=3) — top(1,3) side(2,3).\nCube 3: (x=2,y=3,z=2) — top(2,2) side(3,2).\nCube 4: (x=3,y=1,z=3) — top(3,3) side(1,3).\nCube 5: (x=3,y=2,z=2) — top(3,2) side(2,2). \nNow check coverage:\nTop 'H' cells covered: (1,2),(1,3),(2,2),(3,3),(3,2) — all 5 covered.\nSide rectangle cells covered: (1,2),(2,3),(3,2),(1,3),(2,2) — that is 5 out of 6. Missing: (3,3). \nAdd Cube 6: (x=1,y=3,z=3) — top(1,3) already done, side(3,3) now covered. \nAll 6 side cells now covered: (1,2),(2,3),(3,2),(1,3),(2,2),(3,3). All 5 top H cells covered. \nCheck front 'E' view is not changed: new cubes at z=2 and z=3 are behind z=1, so the front silhouette (z=1 layer) is unchanged. The 'E' shape remains. \nStep 8 — Verify no fewer cubes work. \nWe have 6 top-view cells NOT needing a new cube (they use existing cubes) and we must cover 5 top cells AND 6 side cells. Each cube covers exactly 1 top cell and 1 side cell. We have 11 cell-coverings needed from at most min cubes. Since each cube covers 2 constraints, we need at least ⌈ 6/1 ⌉ = 6 cubes just for the side view (6 new side cells). So 6 is indeed the minimum. \nStep 9 — Final count. \nMinimum additional cubes: 6.

Answer: 6 additional unit cubes must be added.

🎯 Try a Similar Question

Try a Similar Question

Question: Start with six identical unit cubes arranged to form the letter 'L' (a column of four cubes with two more cubes extending to the right at the base). Can you add more unit cubes to this arrangement so that the resulting solid looks like the letter 'L' when viewed from the front, the letter 'T' when viewed from the top, and the letter 'I' when viewed from the right side? Explain whether such an arrangement is possible, and describe how the extra cubes should be placed.

Solution

  1. Step 1: Understand the three required views: We need a single 3D arrangement of unit cubes such that: - Front view shows the letter 'L' (a tall vertical column with a short horizontal base extending to one side). - Top view shows the letter 'T' (a horizontal bar at the top with a vertical stem going downward). - Right-side view shows the letter 'I' (a full vertical column, i.e., a rectangle — tall and narrow).
  2. Step 2: Set up a coordinate grid: Place the cubes on a 3D grid. Let the x-axis run left–right, the y-axis run front–back (depth), and the z-axis run up–down (height). Each unit cube occupies one cell \( (x, y, z) \) where \( x, y, z \) are positive integers.
  3. Step 3: Determine the grid size from the views: The letter 'L' for the front view needs 4 cells tall and 2 cells wide (so \( z \) ranges from 1 to 4 and \( x \) ranges from 1 to 2). The letter 'T' for the top view needs 2 cells deep and 2 cells wide with an extended top-bar, suggesting \( y \) ranges from 1 to 2 and \( x \) from 1 to 2. The letter 'I' for the side view needs 4 cells tall and 1 cell wide, so \( z \) from 1 to 4 and \( y \) from 1 to 1 (just one column deep at the side). We work within a \( 2 \times 2 \times 4 \) grid (x from 1–2, y from 1–2, z from 1–4).
  4. Step 4: Identify which cells are required by each view: Front view ('L', seen along the y-axis): A cell at \( (x, y, z) \) contributes to the front view at column \( x \), row \( z \). The 'L' requires: column \( x=1 \), rows \( z = 1, 2, 3, 4 \) (the vertical stroke), and column \( x=2 \), row \( z=1 \) (the foot). So cells must exist at \( x=1 \) for all z from 1 to 4, and at \( x=2, z=1 \). \nTop view ('T', seen along the z-axis): A cell contributes to the top view at position \( (x, y) \). The 'T' shape requires: both \( x=1 \) and \( x=2 \) at \( y=1 \) (the top bar), and \( x=1 \) at \( y=2 \) (the stem). So cells must exist at \( (x=1, y=1) \), \( (x=2, y=1) \), and \( (x=1, y=2) \) for some z values. \nRight-side view ('I', seen along the x-axis): A cell contributes to the side view at position \( (y, z) \). The 'I' shape is a full rectangle — all rows \( z = 1, 2, 3, 4 \) at the single column \( y=1 \). So cells must exist at \( y=1 \) for every \( z \) from 1 to 4.
  5. Step 5: Choose cube positions satisfying all three views simultaneously: We need to place cubes at positions \( (x, y, z) \) such that every required silhouette square is covered. One valid arrangement is: - \( (1, 1, 1) \): covers front \( (x=1, z=1) \), top \( (x=1, y=1) \), side \( (y=1, z=1) \). - \( (1, 1, 2) \): covers front \( (x=1, z=2) \), top \( (x=1, y=1) \), side \( (y=1, z=2) \). - \( (1, 1, 3) \): covers front \( (x=1, z=3) \), top \( (x=1, y=1) \), side \( (y=1, z=3) \). - \( (1, 1, 4) \): covers front \( (x=1, z=4) \), top \( (x=1, y=1) \), side \( (y=1, z=4) \). - \( (1, 2, 1) \): covers front \( (x=1, z=1) \), top \( (x=1, y=2) \), side \( (y=2, z=1) \) — this fills the 'T' stem in the top view. - \( (2, 1, 1) \): covers front \( (x=2, z=1) \) (foot of 'L'), top \( (x=2, y=1) \) (right end of 'T' bar), side \( (y=1, z=1) \).\nThis gives 6 cubes in total — exactly the 6 we started with!
  6. Step 6: Check each view against the arrangement: Front view check (project onto the xz-plane): Cubes at \( x=1 \) with \( z = 1,2,3,4 \) fill all four rows of the vertical stroke. Cube at \( x=2, z=1 \) fills the foot. This matches the letter 'L'. Confirmed. \nTop view check (project onto the xy-plane): Cubes at \( (x=1, y=1) \), \( (x=1, y=2) \), and \( (x=2, y=1) \) are present. This gives an 'L'-shaped silhouette in the top view — but we wanted a 'T'. We need \( (x=2, y=2) \) to also appear (to complete the top bar of 'T'). We add one extra cube: \( (2, 2, 1) \). \nUpdated top view: \( (1,1), (1,2), (2,1), (2,2) \) — this is a filled \( 2 \times 2 \) square, which can represent a 'T' if the top row is the bar and column \( x=1 \) is the stem. With 7 cubes total (one extra added), the top view now matches 'T'. \nRight-side view check (project onto the yz-plane): Cubes at \( y=1 \) with \( z = 1,2,3,4 \) are present from the column \( (1,1,z) \). The cube \( (2,1,1) \) also has \( y=1, z=1 \) (already covered). So the side view shows \( y=1 \) for \( z=1,2,3,4 \): a single tall column, matching 'I'. Confirmed.
  7. Step 7: State the conclusion: By starting with 6 cubes in the 'L' shape and adding just 1 extra cube at position \( (2, 2, 1) \), we obtain a 7-cube arrangement that simultaneously shows 'L' from the front, 'T' from the top, and 'I' from the right side. Such an arrangement is indeed possible.

Answer: Yes, such an arrangement is possible. Starting from the 6-cube 'L' shape and adding one extra cube at position \( (2, 2, 1) \) in the grid gives a 7-cube solid. This solid shows the letter 'L' from the front, the letter 'T' from the top, and the letter 'I' from the right side — all three views are satisfied simultaneously.

Everything you get with Solver7

More questions in Exploring Some Geometric Themes