SOLVER7 Study. Nothing Else.
Figure It Out 4 Q3

Match each of the following objects with its projections.

CBSE Class 8 Maths · Exploring Some Geometric Themes

Solution

👶 Simple Explanation

Simple Explanation

Imagine taking a photo of your toy from the front, from above, and from the side. Each photo looks different! A ceiling fan from the side looks like a thin stick, but from above you see all its spinning blades. Every object gives its own special set of three photos. By looking at all three photos together, you can figure out exactly which object they belong to. This is how we match real objects to their flat picture-views.

Answer: Correct matches: Car → car front view, capsule top view, car side view. Mug → cup-with-handle front, circle-with-handle top, cup-with-handle side. Funnel → triangle front, circle top, triangle side. Hammer → small handle front, pincer top, hammer-shaped side. Chair → stool-with-back front, square top, L-shaped side. Ceiling fan → thin line front, three-blade top, thin line side. Each object is identified by the unique combination of its FRONT, TOP and SIDE projections.

📖 Matching Objects with Their Projections

Detailed Explanation

When we look at a 3D object from three different directions we get three flat 2D pictures called views or projections. The FRONT view is what you see looking straight at the front of the object, the TOP view is what you see looking straight down from above, and the SIDE view is what you see looking from one side. Each real object produces a unique combination of these three views. To match objects with projections, imagine standing in each direction and asking, What shape would the outline look like from here? For example, a table looks like an open frame from the front and side, but from the top it looks like a rectangle. A ceiling fan looks like a thin line with blades from the side but shows all its blades spread out from the top.

Formula Used

There is no numerical formula. The key idea is: Object → three orthographic views (FRONT, TOP, SIDE), where each view is the outline seen along one direction.

Solution

  1. Step 1: Understand the three directions: In the picture each object has three arrows: T (top, looking down), F (front, looking straight ahead) and S (side, looking from the side). For every object we must find how its outline appears in each of these three directions.
  2. Step 2: Match the car: The toy car from the front looks like a low car outline with two wheels showing. From the top it looks like a rounded rectangle (the roof and bonnet). From the side you see the full car shape with two wheels. So the car matches the wide car-shaped front, the smooth capsule top view, and the long side view of a car.
  3. Step 3: Match the mug / cup: The green mug is a cylinder with a handle. From the front and side it looks like a cup with a handle sticking out. From the top it looks like a circle (the open rim) with a small handle loop. This matches the pictures showing a circular top and a mug-with-handle front and side.
  4. Step 4: Match the funnel: A funnel is a cone with a tube. From the front and side it looks like a triangle (wide top narrowing to a point). From the top it looks like a circle with a small centre. So the funnel matches the triangle front, triangle side and circle top view.
  5. Step 5: Match the hammer: A hammer has a long handle and a metal head. From the side you clearly see the shape of the head with the claw and the handle. From the top you see a small pincer-like shape. This matches the hammer-shaped side view and the small top view.
  6. Step 6: Match the chair: A chair has a seat and a tall back. From the front it looks like a stool with a backrest, from the side it clearly shows the L-shape (seat plus back) with legs, and from the top it looks like a square seat. So the chair matches the L-shaped side view and the square top view.
  7. Step 7: Match the ceiling fan: A ceiling fan has thin blades and a central rod. From the front and side it looks like a thin horizontal line with a small hanging rod. From the top it shows all three blades spread out around the centre. So the fan matches the thin line front/side views and the three-blade top view.
  8. Step 8: Check each match using all three views: The reason we use all three views is that two different objects can share one view but never all three. For example, a mug and a funnel both look like a circle from the top, but their front views (a straight cup versus a triangle) are different. Always confirm using every direction.

Final Answer

Correct matches: Car → car front view, capsule top view, car side view. Mug → cup-with-handle front, circle-with-handle top, cup-with-handle side. Funnel → triangle front, circle top, triangle side. Hammer → small handle front, pincer top, hammer-shaped side. Chair → stool-with-back front, square top, L-shaped side. Ceiling fan → thin line front, three-blade top, thin line side. Each object is identified by the unique combination of its FRONT, TOP and SIDE projections.

Common Mistake

A common mistake is to match an object using only one view (for example, matching the mug to the funnel because both give a circle from the top). Always compare all three views (FRONT, TOP and SIDE) together, since a single matching view is not enough to identify the correct object.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Understand what the three viewing directions mean: Imagine placing an object on a table and then looking at it from three different positions: (a) Standing in front of it at eye level — this gives the FRONT view. (b) Floating directly above it and looking straight down — this gives the TOP view. (c) Standing exactly to one side of it at eye level — this gives the SIDE view. Each view shows only the 2-D outline (silhouette) you would see from that direction, with no depth. — Reason: Before matching any object, you must be clear about what each arrow (F, T, S) in the diagram is actually asking you to observe, otherwise every answer will be guesswork.
  2. Step 2: Match the Car: Mentally stand in front of a toy car: you see a wide, low car-body outline with two circular wheels peeking out at the bottom — that is the FRONT view. Now look straight down from above: the roof, bonnet, and boot merge into one smooth rounded rectangle, like a capsule — that is the TOP view. Finally, stand to the side: you see the full car profile with both wheels visible — that is the SIDE view. — Reason: The capsule shape from the top is the key distinguishing clue for a car, because no other object in the set produces that smooth oval outline when viewed from above.
  3. Step 3: Match the Mug: A mug has a cylindrical body and a D-shaped handle attached to one side. From the FRONT you see the cup outline plus the handle sticking out — a cup-with-handle shape. From the TOP you look straight down into the circular opening, but the handle still protrudes, giving a circle-with-handle shape. From the SIDE (looking at the handle side) you again see a cup-with-handle silhouette. — Reason: The handle is the unique feature; it appears in all three views, which distinguishes the mug from a plain cylinder like a funnel's body.
  4. Step 4: Match the Funnel: A funnel is a cone sitting on top of a narrow tube. From the FRONT the wide cone narrows to a thin spout, producing a triangle (or trapezium) outline. From the TOP you look straight down into the wide circular opening, so the view is a simple circle (the rim). From the SIDE the shape is again a triangle, identical to the front because the funnel is rotationally symmetric. — Reason: A perfect circle in the TOP view combined with a triangle in the front and side views is unique to a rotationally symmetric cone-like shape such as a funnel.
  5. Step 5: Match the Hammer: A hammer has a long thin handle and a heavy rectangular head at the top. From the FRONT the handle is narrow and small relative to the large head — giving a small-handle / large-block front outline. From the TOP looking down you see the rectangular head end-on combined with the handle, resembling a pincer or T-shape. From the SIDE you see the classic hammer silhouette — a long stick with a block at the top. — Reason: The asymmetric bulk of the head versus the thin handle creates three very different outlines in each direction, making the hammer one of the easiest objects to identify once you focus on the head shape.
  6. Step 6: Match the Chair: A chair has four legs, a flat seat, and an upright back-rest. From the FRONT you see the back-rest rising above the seat — a stool-with-back outline. From the TOP looking straight down, the seat dominates and appears as a square or rectangle (the back-rest is thin and appears as just one edge). From the SIDE the seat and back-rest together form an L-shape. — Reason: The L-shaped side view is the clearest identifier for a chair; no other common object in this set produces an L-outline when viewed from the side.
  7. Step 7: Match the Ceiling Fan: A ceiling fan hangs from the ceiling on a thin rod (downrod) and has broad flat blades radiating outward in one horizontal plane. From the FRONT or SIDE the blades are edge-on and nearly invisible — you see only the thin rod and motor housing, producing a thin vertical line. From the TOP you look straight down and see all the blades spread out, giving the recognisable three-blade (or four-blade) fan outline. — Reason: The extreme contrast between a nearly invisible thin-line view from the front/side and a dramatic multi-blade view from the top is the unique signature of any object whose main features lie in a single horizontal plane, exactly like a ceiling fan.
  8. Step 8: Verify by cross-checking: Go back through every matched pair and confirm that no two objects share the same combination of three views. For instance, both the funnel and the fan show a circle from the top, but their front views are completely different (triangle vs. thin line), so there is no confusion. Similarly, the mug and the car both have non-circular top views, but the mug's top view has a handle attached to the circle while the car's top view is a smooth capsule — no overlap. — Reason: Cross-checking ensures the matching is consistent and that each object occupies its own unique slot, which is the whole point of the three-view system in orthographic projection.

Final Answer

Correct matches: Car → car front view, capsule top view, car side view. Mug → cup-with-handle front, circle-with-handle top, cup-with-handle side. Funnel → triangle front, circle top, triangle side. Hammer → small handle front, pincer top, hammer-shaped side. Chair → stool-with-back front, square top, L-shaped side. Ceiling fan → thin line front, three-blade top, thin line side. Each object is identified by the unique combination of its FRONT, TOP and SIDE projections.

Common Mistake

One common mistake: Students often try to match using only ONE view (usually the front) and ignore the top and side views entirely — this leads to wrong answers because many objects can look similar from just one direction (for example, a cylinder and a funnel both show a rectangular outline from the front). Always use all THREE views together to make a definitive match.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Rule: Object → (FRONT view, TOP view, SIDE view). Match the outline seen from each direction.
  2. Step 2: Car: car-outline front, capsule top, car-outline side. Mug: cup-with-handle front, circle-with-handle top, cup-with-handle side. Funnel: triangle front, circle top, triangle side.
  3. Step 3: Hammer: small-handle front, pincer top, hammer-shape side. Chair: stool-with-back front, square top, L-shape side. Ceiling fan: thin-line front, three-blade top, thin-line side.

Answer: Correct matches: Car → car front view, capsule top view, car side view. Mug → cup-with-handle front, circle-with-handle top, cup-with-handle side. Funnel → triangle front, circle top, triangle side. Hammer → small handle front, pincer top, hammer-shaped side. Chair → stool-with-back front, square top, L-shaped side. Ceiling fan → thin line front, three-blade top, thin line side. Each object is identified by the unique combination of its FRONT, TOP and SIDE projections.

➕ More Examples

More Examples

Example 1

Question: A solid is placed on a table. Its front view is a rectangle, its side view is also a rectangle, and its top view is a rectangle. Another solid has a circular front view, a circular side view, and a circular top view. A third solid has a triangular front view, a triangular side view, and a square top view. Match each solid (A, B, C) with its correct set of views: Solid A: Front — circle, Side — circle, Top — circle Solid B: Front — rectangle, Side — rectangle, Top — rectangle Solid C: Front — triangle, Side — triangle, Top — square Solids to choose from: (i) Cuboid, (ii) Sphere, (iii) Square Pyramid

Solution: We analyse the views of each standard solid. For a Sphere: Every view from any direction is a circle because a sphere looks perfectly round from all sides. So Front = circle, Side = circle, Top = circle. For a Cuboid: Viewed from the front you see a rectangle, from the side you see a rectangle, and from the top you see a rectangle (since all faces are rectangles). So Front = rectangle, Side = rectangle, Top = rectangle. For a Square Pyramid: Viewed from the front, you see a triangle (the sloping face). Viewed from the side, you also see a triangle. Viewed from directly above (top view), you see the square base with diagonal lines meeting at the centre. So Front = triangle, Side = triangle, Top = square. Now matching: Solid A (Front — circle, Side — circle, Top — circle) matches (ii) Sphere. Solid B (Front — rectangle, Side — rectangle, Top — rectangle) matches (i) Cuboid. Solid C (Front — triangle, Side — triangle, Top — square) matches (iii) Square Pyramid.

Answer: A — (ii) Sphere, B — (i) Cuboid, C — (iii) Square Pyramid

Example 2

Question: Four 3D solids are described by their front view, side view, and top view. Match each solid (P, Q, R, S) with its correct description of views. Solid P: Cylinder Solid Q: Cone Solid R: Cube Solid S: Triangular Prism View sets: (i) Front — square, Side — square, Top — square (ii) Front — rectangle, Side — circle, Top — rectangle (with a circle inside) (iii) Front — triangle, Side — triangle, Top — circle (iv) Front — rectangle, Side — triangle, Top — rectangle

Solution: We examine each solid carefully. For a Cube: All faces are squares of equal size. Looking from the front, side, or top, you always see a square. So the matching view set is (i). For a Cylinder: Looking from the front, you see a rectangle (the curved surface appears as a rectangle). Looking from the side, you see a circle (the circular cross-section). Looking from the top, you see a rectangle or a circle depending on orientation; for a cylinder standing upright, the top view is a circle and the front view is a rectangle. A common representation: Front — rectangle, Side — circle, Top — circle or rectangle. Here, view set (ii) gives Front — rectangle, Side — circle, Top — rectangle (with a circle inside), which matches a cylinder standing upright (the rectangle with a circle inside represents the top circular opening seen within the rectangular outline). So Cylinder matches (ii). For a Cone: Standing upright, the front view is a triangle (sloping sides meet at the apex), the side view is also a triangle, and the top view is a circle (the circular base with a point at the centre). So Cone matches (iii). For a Triangular Prism: The front view shows a rectangle (the length and height of the prism). The side view shows a triangle (the triangular cross-section). The top view shows a rectangle (looking down the length). So Triangular Prism matches (iv). Final matching: P (Cylinder) — (ii) Q (Cone) — (iii) R (Cube) — (i) S (Triangular Prism) — (iv)

Answer: P — (ii), Q — (iii), R — (i), S — (iv)

🎯 Try a Similar Question

Try a Similar Question

Question: Six everyday objects are listed in Column A. Three 2D projections (Front View, Top View, Side View) for each object are described in Column B. Match each object in Column A with its correct set of projections in Column B. Column A (Objects): 1. Cylinder (like a tin can) 2. Cone (like an ice-cream cone) 3. Brick (rectangular box) 4. Football (sphere) 5. Table 6. Book (closed, rectangular) Column B (Projection Sets — each set gives Front View / Top View / Side View): P. Rectangle / Rectangle / Rectangle Q. Circle / Circle / Circle R. Rectangle / Circle / Rectangle S. Triangle / Circle / Triangle T. Rectangle with four legs / Rectangle / Rectangle with two legs (T-shape from side) U. Rectangle / Rectangle / Rectangle (thinner than P) Match each object (1–6) with the correct projection set (P–U).

Solution

  1. Step 1: Analyse the Cylinder (tin can): A cylinder has a circular cross-section and a rectangular body. Viewed from the FRONT: you see a rectangle (height × diameter). Viewed from the TOP: you see a circle (the circular face). Viewed from the SIDE: you see a rectangle again (same as front). This matches Set R: Rectangle / Circle / Rectangle.
  2. Step 2: Analyse the Cone (ice-cream cone): A cone has a pointed tip and a circular base. Viewed from the FRONT: a triangle (apex at top, circular base at bottom appears as a line). Viewed from the TOP: a circle with a dot at the centre (the apex). Viewed from the SIDE: a triangle again. This matches Set S: Triangle / Circle / Triangle.
  3. Step 3: Analyse the Brick (rectangular box / cuboid): A brick is a cuboid. All three views — front, top, and side — are rectangles. The front and side rectangles may have the same proportions, and the top is also a rectangle. A brick is typically longer than it is tall, so its projections are wide rectangles. This matches Set P: Rectangle / Rectangle / Rectangle (the wider/longer version).
  4. Step 4: Analyse the Football (sphere): A sphere looks circular from every direction. Viewed from the FRONT: circle. Viewed from the TOP: circle. Viewed from the SIDE: circle. This matches Set Q: Circle / Circle / Circle.
  5. Step 5: Analyse the Table: A table has a flat rectangular top and four legs. Viewed from the FRONT: a rectangle (top) with two visible legs hanging down — giving a rectangle-with-legs shape. Viewed from the TOP: the tabletop appears as a plain rectangle (legs hidden underneath). Viewed from the SIDE: the top is a rectangle with one (or two) legs visible — giving a T-shape or rectangle-with-two-legs outline. This matches Set T: Rectangle with four legs (front) / Rectangle (top) / Rectangle with two legs — T-shape (side).
  6. Step 6: Analyse the Book (closed, rectangular): A closed book is also a cuboid but much thinner (narrow depth). All three views are rectangles, but the side view is very narrow (thin rectangle) compared to the front. This matches Set U: Rectangle / Rectangle / Rectangle (thinner/narrower version, distinct from the brick).
  7. Step 7: Write the Final Matches: 1. Cylinder → R (Rectangle / Circle / Rectangle) 2. Cone → S (Triangle / Circle / Triangle) 3. Brick → P (Rectangle / Rectangle / Rectangle — wide proportions) 4. Football → Q (Circle / Circle / Circle) 5. Table → T (Rectangle-with-legs front / Rectangle top / T-shaped side) 6. Book → U (Rectangle / Rectangle / Rectangle — thin proportions)

Answer: 1 → R, 2 → S, 3 → P, 4 → Q, 5 → T, 6 → U. That is: Cylinder matches (Rectangle / Circle / Rectangle); Cone matches (Triangle / Circle / Triangle); Brick matches (Rectangle / Rectangle / Rectangle — wide); Football matches (Circle / Circle / Circle); Table matches (Rectangle-with-legs / Rectangle / T-shaped side); Book matches (Rectangle / Rectangle / Rectangle — thin).

Everything you get with Solver7

More questions in Exploring Some Geometric Themes