SOLVER7 Study. Nothing Else.
Practice Set 6.5 Q2

Show the following data by a frequency polygon.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a connect-the-dots picture that shows how many families earn different amounts of money. Each dot sits at the middle of a money range, placed as high as the number of families in that range. We add two extra dots at the sides with zero families, so the picture starts and ends at the ground. Joining all the dots with straight lines makes a mountain-shaped drawing called a frequency polygon. The tallest peak tells us which earning range has the most families.

Answer: The frequency polygon is obtained by plotting the points \((-100, 0)\), \((100, 240)\), \((300, 300)\), \((500, 450)\), \((700, 350)\), \((900, 160)\), \((1100, 0)\) on graph paper and joining them by straight line segments. The polygon reaches its highest point at class mark 500 with 450 families.

📖 Frequency Polygon for Electricity Bill Data

Detailed Explanation

A frequency polygon is a graphical way of representing grouped frequency distribution. To draw it, we first find the class marks (midpoints) of each class interval and then plot these midpoints against their corresponding frequencies. The plotted points are joined by straight line segments to form a polygon. To close the polygon, we add one class interval before the first class and one after the last class, both with frequency 0. The class mark is calculated as the average of the lower and upper limits of a class interval.

Formula Used

\[\text{Class Mark} = \frac{\text{Lower limit} + \text{Upper limit}}{2}\]

Solution

  1. Step 1: Identify the class intervals and frequencies: From the table, the class intervals and their frequencies are: 0-200 has frequency 240, 200-400 has 300, 400-600 has 450, 600-800 has 350, and 800-1000 has 160.
  2. Step 2: Calculate the class marks: The class mark is the midpoint of each class interval. For 0-200: \(\frac{0+200}{2} = 100\). For 200-400: \(\frac{200+400}{2} = 300\). For 400-600: \(\frac{400+600}{2} = 500\). For 600-800: \(\frac{600+800}{2} = 700\). For 800-1000: \(\frac{800+1000}{2} = 900\).
  3. Step 3: Add extra classes to close the polygon: To close the frequency polygon at both ends, we add one class before and one after with frequency 0. Before 0-200, we add class -200 to 0 with class mark \(-100\) and frequency 0. After 800-1000, we add class 1000-1200 with class mark \(1100\) and frequency 0.
  4. Step 4: Prepare the coordinate points: The points to be plotted are: \((-100, 0)\), \((100, 240)\), \((300, 300)\), \((500, 450)\), \((700, 350)\), \((900, 160)\), \((1100, 0)\).
  5. Step 5: Draw the axes: On graph paper, mark the class marks (electricity bill in Rs.) along the x-axis using a suitable scale (for example, 1 cm = Rs. 100). Mark the number of families along the y-axis (for example, 1 cm = 50 families).
  6. Step 6: Plot the points and join them: Plot each point from Step 4 on the graph. Then join the successive points using straight line segments. The resulting closed figure is the required frequency polygon. It starts and ends on the x-axis, giving the polygon a proper closed shape.
  7. Step 7: Interpretation: The polygon rises from 0 at \(x = -100\), peaks at the class mark 500 (with 450 families), and then decreases to 0 at \(x = 1100\). This shows that most families have electricity bills in the range Rs. 400-600.
  8. Step 8: Label the graph: Label the x-axis as 'Electricity Bill (in Rs.)' and y-axis as 'Number of Families'. Give the graph a title such as 'Frequency Polygon of Electricity Bills'.

Final Answer

The frequency polygon is obtained by plotting the points \((-100, 0)\), \((100, 240)\), \((300, 300)\), \((500, 450)\), \((700, 350)\), \((900, 160)\), \((1100, 0)\) on graph paper and joining them by straight line segments. The polygon reaches its highest point at class mark 500 with 450 families.

Common Mistake

A very common mistake is plotting the frequencies against the upper or lower limits of the class intervals instead of the class marks (midpoints). Also, students often forget to add the two extra classes with frequency 0 at both ends, which are necessary to close the polygon properly.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List all the class intervals and their corresponding frequencies from the table: 0–200 with frequency 240, 200–400 with frequency 300, 400–600 with frequency 450, 600–800 with frequency 350, and 800–1000 with frequency 160. — Reason: Organising the given data first makes it easier to compute class marks and plot the polygon accurately.
  2. Step 2: Compute the class mark for each interval. For 0–200: \( \frac{0 + 200}{2} = 100 \). For 200–400: \( \frac{200 + 400}{2} = 300 \). For 400–600: \( \frac{400 + 600}{2} = 500 \). For 600–800: \( \frac{600 + 800}{2} = 700 \). For 800–1000: \( \frac{800 + 1000}{2} = 900 \). — Reason: The class mark is the representative value of each class interval; the polygon is plotted at these midpoints rather than at the boundaries.
  3. Step 3: Add one imaginary class before the first interval and one after the last interval, each with frequency 0. The class before 0–200 is \(-200\) to 0, giving a class mark of \( \frac{-200 + 0}{2} = -100 \) and frequency 0. The class after 800–1000 is 1000–1200, giving a class mark of \( \frac{1000 + 1200}{2} = 1100 \) and frequency 0. — Reason: These two anchor points ensure the frequency polygon is properly closed at both ends, touching the horizontal axis.
  4. Step 4: Compile all the coordinate points to be plotted (class mark, frequency): \( (-100,\, 0) \), \( (100,\, 240) \), \( (300,\, 300) \), \( (500,\, 450) \), \( (700,\, 350) \), \( (900,\, 160) \), \( (1100,\, 0) \). — Reason: Writing out all coordinates in order prevents errors when marking points on the graph.
  5. Step 5: Plot each of the seven points on graph paper with class mark values on the horizontal axis and frequency values on the vertical axis. Then join consecutive points with straight line segments in order from \( (-100, 0) \) through to \( (1100, 0) \). — Reason: Connecting the points with straight lines (not curves) is the defining feature of a frequency polygon, distinguishing it from a frequency curve.
  6. Step 6: Observe that the polygon rises from \( (-100, 0) \), increases through 240, 300, and peaks at class mark 500 with frequency 450, then decreases through 350, 160, and returns to 0 at \( (1100, 0) \). — Reason: Reading the shape of the polygon reveals the distribution of families across income groups; the peak at class mark 500 tells us that the 400–600 income group has the highest number of families.

Final Answer

The frequency polygon is obtained by plotting the points \((-100, 0)\), \((100, 240)\), \((300, 300)\), \((500, 450)\), \((700, 350)\), \((900, 160)\), \((1100, 0)\) on graph paper and joining them by straight line segments. The polygon reaches its highest point at class mark 500 with 450 families.

Common Mistake

One common mistake: Students forget to add the two imaginary classes with zero frequency at both ends, so the polygon is left open (floating above the axis) instead of being properly closed at the baseline.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given class intervals and frequencies: 0–200 → 240, 200–400 → 300, 400–600 → 450, 600–800 → 350, 800–1000 → 160.
  2. Step 2: Class marks: \( \frac{0+200}{2} = 100 \), \( \frac{200+400}{2} = 300 \), \( \frac{400+600}{2} = 500 \), \( \frac{600+800}{2} = 700 \), \( \frac{800+1000}{2} = 900 \).
  3. Step 3: Add imaginary classes at both ends with frequency 0: class \(-200\) to \(0\) gives class mark \(-100\), frequency \(0\); class \(1000\) to \(1200\) gives class mark \(1100\), frequency \(0\).
  4. Step 4: Plot points: \((-100,\,0)\), \((100,\,240)\), \((300,\,300)\), \((500,\,450)\), \((700,\,350)\), \((900,\,160)\), \((1100,\,0)\); join with straight line segments.

Answer: The frequency polygon is obtained by plotting the points \((-100, 0)\), \((100, 240)\), \((300, 300)\), \((500, 450)\), \((700, 350)\), \((900, 160)\), \((1100, 0)\) on graph paper and joining them by straight line segments. The polygon reaches its highest point at class mark 500 with 450 families.

➕ More Examples

More Examples

Example 1

Question: The monthly pocket money (in rupees) of 40 students in a class is given below. Draw a frequency polygon for this data. \nPocket Money (Rs.) | Number of Students 100 – 150 | 4 150 – 200 | 8 200 – 250 | 14 250 – 300 | 9 300 – 350 | 5

Solution: Step 1: Find the class mark of each interval using the formula: Class Mark = \( \dfrac{\text{Lower Limit} + \text{Upper Limit}}{2} \) \nFor 100–150: \( \dfrac{100 + 150}{2} = 125 \)\nFor 150–200: \( \dfrac{150 + 200}{2} = 175 \)\nFor 200–250: \( \dfrac{200 + 250}{2} = 225 \)\nFor 250–300: \( \dfrac{250 + 300}{2} = 275 \)\nFor 300–350: \( \dfrac{300 + 350}{2} = 325 \) \nStep 2: Add imaginary classes to close the polygon. \nImaginary class before first: 50–100, Class Mark = \( \dfrac{50 + 100}{2} = 75 \), Frequency = 0\nImaginary class after last: 350–400, Class Mark = \( \dfrac{350 + 400}{2} = 375 \), Frequency = 0 \nStep 3: Table of points to be plotted. \nClass Mark | Frequency 75 | 0 125 | 4 175 | 8 225 | 14 275 | 9 325 | 5 375 | 0 \nStep 4: Plot these points with Class Mark on the x-axis and Frequency on the y-axis. Join the points in order with straight line segments, starting and ending at frequency 0. This closed figure is the frequency polygon.

Answer: The frequency polygon is plotted with points at (75, 0), (125, 4), (175, 8), (225, 14), (275, 9), (325, 5), and (375, 0), joined by straight lines.

Example 2

Question: The ages (in years) of participants in a yoga camp are recorded below. Draw a frequency polygon for this data. \nAge (years) | Number of Participants 20 – 25 | 6 25 – 30 | 11 30 – 35 | 18 35 – 40 | 10 40 – 45 | 5

Solution: Step 1: Calculate the class mark for each interval. \nFor 20–25: \( \dfrac{20 + 25}{2} = 22.5 \)\nFor 25–30: \( \dfrac{25 + 30}{2} = 27.5 \)\nFor 30–35: \( \dfrac{30 + 35}{2} = 32.5 \)\nFor 35–40: \( \dfrac{35 + 40}{2} = 37.5 \)\nFor 40–45: \( \dfrac{40 + 45}{2} = 42.5 \) \nStep 2: Add imaginary classes at both ends with frequency 0 to close the polygon. \nImaginary class before first: 15–20, Class Mark = \( \dfrac{15 + 20}{2} = 17.5 \), Frequency = 0\nImaginary class after last: 45–50, Class Mark = \( \dfrac{45 + 50}{2} = 47.5 \), Frequency = 0 \nStep 3: The complete table of points is: \nClass Mark | Frequency 17.5 | 0 22.5 | 6 27.5 | 11 32.5 | 18 37.5 | 10 42.5 | 5 47.5 | 0 \nStep 4: On a graph, take Age (Class Mark) on the x-axis and Number of Participants (Frequency) on the y-axis. Plot each ordered pair from the table above. Join all the points with straight line segments in order. The resulting closed figure is the required frequency polygon.

Answer: The frequency polygon is plotted with points at (17.5, 0), (22.5, 6), (27.5, 11), (32.5, 18), (37.5, 10), (42.5, 5), and (47.5, 0), joined by straight lines.

🎯 Try a Similar Question

Try a Similar Question

Question: The monthly electricity consumption (in units) of 1200 households in a town is recorded below. Draw a frequency polygon for the data. \nMonthly Consumption (units) | Number of Households 0 – 50 | 80 50 – 100 | 175 100 – 150 | 320 150 – 200 | 400 200 – 250 | 145 250 – 300 | 80

Solution

  1. Step 1: Find the class marks for each interval: The class mark of each interval is the average of its lower and upper limits. \nFor 0–50: \( \dfrac{0+50}{2} = 25 \) \nFor 50–100: \( \dfrac{50+100}{2} = 75 \) \nFor 100–150: \( \dfrac{100+150}{2} = 125 \) \nFor 150–200: \( \dfrac{150+200}{2} = 175 \) \nFor 200–250: \( \dfrac{200+250}{2} = 225 \) \nFor 250–300: \( \dfrac{250+300}{2} = 275 \)
  2. Step 2: Add imaginary classes at both ends with zero frequency: To close the polygon, add one imaginary class before the first interval and one after the last. \nBefore 0–50, the imaginary class is \(-50\)–\(0\) with class mark \( \dfrac{-50+0}{2} = -25 \) and frequency 0. \nAfter 250–300, the imaginary class is 300–350 with class mark \( \dfrac{300+350}{2} = 325 \) and frequency 0.
  3. Step 3: List all points to be plotted: The points (class mark, frequency) to be plotted are: \( (-25,\ 0) \), \( (25,\ 80) \), \( (75,\ 175) \), \( (125,\ 320) \), \( (175,\ 400) \), \( (225,\ 145) \), \( (275,\ 80) \), \( (325,\ 0) \)
  4. Step 4: Draw the frequency polygon: Take the x-axis to represent Monthly Consumption (class marks) and the y-axis to represent the Number of Households. Plot all 8 points listed above on graph paper. Join consecutive points with straight line segments. The resulting closed figure is the frequency polygon for the given data.
  5. Step 5: Identify the peak: Looking at the plotted points, the highest frequency is 400, which occurs at class mark \( 175 \). This means the class interval 150–200 has the maximum number of households.

Answer: The frequency polygon is obtained by plotting the points \( (-25,\ 0) \), \( (25,\ 80) \), \( (75,\ 175) \), \( (125,\ 320) \), \( (175,\ 400) \), \( (225,\ 145) \), \( (275,\ 80) \), \( (325,\ 0) \) on graph paper and joining them with straight line segments. The polygon reaches its highest point at class mark \( 175 \) with 400 households, corresponding to the interval 150–200 units.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)