SOLVER7 Study. Nothing Else.
Practice Set 6.5 Q1 (i)

Observe the following frequency polygon and write the answers of the questions below it.
Which class has the maximum number of students\(?\)

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine a dot-to-dot drawing where each dot sits higher when more students scored in that range. The tallest dot shows where the most students scored. On this drawing, the dot at class mark \(65\) sits the highest, with \(60\) students. A class mark is just the middle value of a group. Since the group size is \(10\), we go \(5\) below and \(5\) above \(65\) to find the group. That gives us the range \(60\) to \(70\).

Answer: The class \(60 - 70\) has the maximum number of students (\(60\) students).

📖 Frequency Polygon - Maximum Students Class

Detailed Explanation

A frequency polygon is a graphical representation of a frequency distribution. Each point on the polygon is plotted using the class mark (mid-value of the class) on the X-axis and the frequency (number of students) on the Y-axis. To find the class with the maximum number of students, we look for the highest peak of the polygon. The X-coordinate of that peak gives the class mark, and using this class mark we can identify the corresponding class interval. Since the class width here is \(10\) (difference between consecutive class marks like \(35, 45, 55, ...\)), the class interval is obtained by subtracting and adding \(5\) to the class mark.

Formula Used

Class Interval = (Class Mark \(-\) \(\tfrac{h}{2}\)) to (Class Mark \(+\) \(\tfrac{h}{2}\)), where \(h\) is the class width.

Solution

  1. Step 1: Read the coordinates from the polygon: The plotted points are \((35, 20)\), \((45, 40)\), \((55, 50)\), \((65, 60)\), \((75, 35)\), and \((85, 15)\). Here the first coordinate is the class mark (mid-value of the marks class) and the second coordinate is the number of students.
  2. Step 2: Identify the highest frequency: Compare the frequencies (students): \(20, 40, 50, 60, 35, 15\). The maximum value is \(60\), which corresponds to the point \((65, 60)\). So the class mark is \(65\).
  3. Step 3: Find the class width: The difference between successive class marks is \(45 - 35 = 10\). So class width \(h = 10\) and half-width \(= 5\).
  4. Step 4: Convert class mark into class interval: Lower limit \(= 65 - 5 = 60\) and Upper limit \(= 65 + 5 = 70\). Hence the class interval is \(60 - 70\).
  5. Step 5: State the result: The class \(60 - 70\) marks has the maximum number of students, which is \(60\) students.

Final Answer

The class \(60 - 70\) has the maximum number of students (\(60\) students).

Common Mistake

Students often write the answer as the class mark \(65\) itself instead of converting it into the proper class interval \(60 - 70\) using half of the class width.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List all the points plotted on the frequency polygon: \( (35, 20) \), \( (45, 40) \), \( (55, 50) \), \( (65, 60) \), \( (75, 35) \), \( (85, 15) \). — Reason: Each point is of the form (class mark, number of students), so reading these coordinates gives us all the data we need.
  2. Step 2: Compare all the frequency values (the Y-coordinates): \( 20, 40, 50, 60, 35, 15 \). The largest value is \( 60 \). — Reason: The highest Y-value corresponds to the tallest peak of the polygon, which represents the class with the most students.
  3. Step 3: The point with frequency \( 60 \) is \( (65, 60) \), so the class mark is \( 65 \). — Reason: The X-coordinate of the highest point is the class mark (mid-value) of the class interval we need to identify.
  4. Step 4: Find the class width \( h \) by subtracting consecutive class marks: \( 45 - 35 = 10 \). So \( h = 10 \) and half-width \( = \dfrac{h}{2} = 5 \). — Reason: Knowing the class width lets us reconstruct the full class interval from just the class mark.
  5. Step 5: Apply the formula to find the class interval. Lower boundary: \( 65 - 5 = 60 \). Upper boundary: \( 65 + 5 = 70 \). So the class interval is \( 60 - 70 \). — Reason: Subtracting and adding the half-width to the class mark gives the exact boundaries of the class.

Final Answer

The class \(60 - 70\) has the maximum number of students (\(60\) students).

Common Mistake

One common mistake: Students sometimes confuse the class mark (X-coordinate) with the frequency (Y-coordinate) and mistakenly report \( 60 \) as the class mark, leading to an incorrect class interval of \( 55 - 65 \) instead of \( 60 - 70 \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Points on polygon: \( (35,20),\ (45,40),\ (55,50),\ (65,60),\ (75,35),\ (85,15) \)
  2. Step 2: Maximum frequency \( = 60 \) at point \( (65, 60) \), so class mark \( = 65 \), class width \( h = 10 \)
  3. Step 3: Class interval: \( 65 - 5 = 60 \) to \( 65 + 5 = 70 \), i.e., \( 60 - 70 \)

Answer: The class \(60 - 70\) has the maximum number of students (\(60\) students).

➕ More Examples

More Examples

Example 1

Question: The following table shows the data used to draw a frequency polygon for the marks obtained by students in a test. Based on the data, which class interval has the maximum number of students? \nClass Interval: 10–20, 20–30, 30–40, 40–50, 50–60\nMidpoint: 15, 25, 35, 45, 55\nFrequency: 8, 14, 22, 17, 9

Solution: We are given the following frequencies for each class interval: \nClass 10–20 has frequency \(8\).\nClass 20–30 has frequency \(14\).\nClass 30–40 has frequency \(22\).\nClass 40–50 has frequency \(17\).\nClass 50–60 has frequency \(9\). \nComparing all frequencies: \(8, 14, 22, 17, 9\). \nThe maximum frequency is \(22\), which belongs to the class interval 30–40. \nTherefore, the class interval 30–40 has the maximum number of students.

Answer: The class interval 30–40 has the maximum number of students (frequency = 22).

Example 2

Question: A survey recorded the number of hours spent on mobile phones daily by people in different age groups. The results were plotted as a frequency polygon. The data is given below. Which age group has the maximum number of people? \nAge Group (years): 10–20, 20–30, 30–40, 40–50, 50–60, 60–70\nMidpoint: 15, 25, 35, 45, 55, 65\nFrequency: 12, 28, 35, 40, 18, 7

Solution: We are given the following frequencies for each age group: \nAge group 10–20 has frequency \(12\).\nAge group 20–30 has frequency \(28\).\nAge group 30–40 has frequency \(35\).\nAge group 40–50 has frequency \(40\).\nAge group 50–60 has frequency \(18\).\nAge group 60–70 has frequency \(7\). \nComparing all frequencies: \(12, 28, 35, 40, 18, 7\). \nThe maximum frequency is \(40\), which belongs to the age group 40–50. \nOn the frequency polygon, the highest point (peak) corresponds to the midpoint \(45\), confirming that the age group 40–50 has the greatest number of people. \nTherefore, the age group 40–50 has the maximum number of people.

Answer: The age group 40–50 has the maximum number of people (frequency = 40).

🎯 Try a Similar Question

Try a Similar Question

Question: The following data represents the frequencies plotted on a frequency polygon for marks obtained by students in a test. The midpoints and their corresponding frequencies are: Midpoint 15 → 10 students, Midpoint 25 → 30 students, Midpoint 35 → 75 students, Midpoint 45 → 50 students, Midpoint 55 → 20 students. Each class interval has a width of 10. Which class interval has the maximum number of students, and how many students are in that class?

Solution

  1. Step 1: List the midpoints and their frequencies: From the frequency polygon, the midpoints and corresponding frequencies are: Midpoint \(15\) → \(10\) students, Midpoint \(25\) → \(30\) students, Midpoint \(35\) → \(75\) students, Midpoint \(45\) → \(50\) students, Midpoint \(55\) → \(20\) students.
  2. Step 2: Identify the highest frequency: Comparing all frequencies: \(10, 30, 75, 50, 20\). The highest frequency is \(75\), which corresponds to the midpoint \(35\).
  3. Step 3: Find the class interval from the midpoint: Since the class width is \(10\) and the midpoint is \(35\), the class interval is found as follows. Lower boundary: \[35 - \frac{10}{2} = 35 - 5 = 30\] Upper boundary: \[35 + \frac{10}{2} = 35 + 5 = 40\] So the class interval is \(30 - 40\).
  4. Step 4: State the conclusion: The class \(30 - 40\) has the maximum number of students, which is \(75\) students.

Answer: The class \(30 - 40\) has the maximum number of students, with \(75\) students.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5