SOLVER7 Study. Nothing Else.
2023 Board Paper Q2

Show the following data by A frequency polygon :

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you are drawing a connect-the-dots picture of how many families pay different electricity bills. Each dot sits at the middle of a bill range, showing how many families fall there. You also add two extra dots at the ends, both touching zero, so the picture forms a closed shape. Drawing lines between all the dots gives you a pointy mountain shape called a frequency polygon. The tallest peak tells you which bill amount is most common among the families.

Answer: The frequency polygon is obtained by plotting the points (100, 0), (300, 240), (500, 300), (700, 450), (900, 350), (1100, 160) and (1300, 0) on graph paper and joining them by straight line segments. The polygon peaks at the class 600-800 with 450 families.

📖 Frequency Polygon for Electricity Bill Data

Detailed Explanation

A frequency polygon is a graphical representation of a frequency distribution. It is drawn by plotting the class marks (midpoints of class intervals) on the x-axis against their corresponding frequencies on the y-axis, and then joining the plotted points by straight line segments. To close the polygon, we take one extra class interval before the first class and one after the last class, both with frequency 0. The class mark of any interval is the average of its lower and upper limits.

Formula Used

\[ \text{Class Mark} = \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \]

Solution

  1. Step 1: Write the given data: The classes represent electricity bills (in Rs.) and frequencies represent the number of families: 200-400 : 240, 400-600 : 300, 600-800 : 450, 800-1000 : 350, 1000-1200 : 160.
  2. Step 2: Find the class marks: Class mark of each interval is calculated using \( \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \). \[ \text{For 200-400: } \dfrac{200+400}{2} = 300 \] \[ \text{For 400-600: } \dfrac{400+600}{2} = 500 \] \[ \text{For 600-800: } \dfrac{600+800}{2} = 700 \] \[ \text{For 800-1000: } \dfrac{800+1000}{2} = 900 \] \[ \text{For 1000-1200: } \dfrac{1000+1200}{2} = 1100 \]
  3. Step 3: Add two extra classes with frequency 0: To close the frequency polygon, add one class before the first (0-200, class mark 100) and one after the last (1200-1400, class mark 1300), each with frequency 0. This gives the extended table of points to plot.
  4. Step 4: Prepare the table of points: The points (class mark, frequency) to be plotted are: (100, 0), (300, 240), (500, 300), (700, 450), (900, 350), (1100, 160), (1300, 0).
  5. Step 5: Draw the axes and choose the scale: On graph paper, take class marks (electricity bills in Rs.) along the x-axis with scale 1 cm = 200 (starting near 100) and number of families along the y-axis with scale 1 cm = 50 families. Since the x-values start from 100, mark a kink (zig-zag) between 0 and 100 on the x-axis to indicate a break.
  6. Step 6: Plot the points and join them: Plot each of the seven points listed in Step 4. Join consecutive points using straight line segments. Beginning at (100, 0), rising to (300, 240), (500, 300), peaking at (700, 450), then descending through (900, 350), (1100, 160) and returning to (1300, 0), the closed figure formed is the required frequency polygon.
  7. Step 7: Label the graph: Label the x-axis as 'Electricity Bill (in Rs.)' and the y-axis as 'Number of Families'. Give the graph a suitable title such as 'Frequency Polygon of Electricity Bills'.

Final Answer

The frequency polygon is obtained by plotting the points (100, 0), (300, 240), (500, 300), (700, 450), (900, 350), (1100, 160) and (1300, 0) on graph paper and joining them by straight line segments. The polygon peaks at the class 600-800 with 450 families.

Common Mistake

A very common mistake is plotting frequencies against the class limits (like 200, 400, 600, ...) instead of class marks (300, 500, 700, ...). Also, students often forget to add the two extra classes with frequency 0 at both ends, leaving the polygon open instead of closed.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write down the given data. The electricity bill ranges (in Rs.) and the corresponding number of families are: 200–400 with 240 families, 400–600 with 300 families, 600–800 with 450 families, 800–1000 with 350 families, and 1000–1200 with 160 families. — Reason: Organising the raw data first helps us see exactly which class intervals and frequencies we are working with before any calculations begin.
  2. Step 2: Calculate the class mark for each interval using the formula \( \frac{\text{Lower Limit} + \text{Upper Limit}}{2} \). For 200–400: \[ \frac{200 + 400}{2} = 300 \] For 400–600: \[ \frac{400 + 600}{2} = 500 \] For 600–800: \[ \frac{600 + 800}{2} = 700 \] For 800–1000: \[ \frac{800 + 1000}{2} = 900 \] For 1000–1200: \[ \frac{1000 + 1200}{2} = 1100 \] — Reason: Frequency polygons are plotted at the midpoint of each class, not at the boundary, so finding the class mark is essential before we can place any point on the graph.
  3. Step 3: Add one imaginary class before the first interval and one after the last interval, each with a frequency of 0. The class before is 0–200, whose class mark is \[ \frac{0 + 200}{2} = 100 \] The class after is 1200–1400, whose class mark is \[ \frac{1200 + 1400}{2} = 1300 \] — Reason: A frequency polygon must be a closed figure. By starting and ending at zero, the graph touches the x-axis at both ends, forming a proper closed polygon.
  4. Step 4: Compile the complete list of points to be plotted as (class mark, frequency): \((100,\, 0)\), \((300,\, 240)\), \((500,\, 300)\), \((700,\, 450)\), \((900,\, 350)\), \((1100,\, 160)\), and \((1300,\, 0)\). — Reason: Having all coordinates in one place makes it easy to plot them accurately on graph paper without missing any point.
  5. Step 5: Plot all seven points on a graph with the x-axis representing the class marks (electricity bill in Rs.) and the y-axis representing the number of families. Then join consecutive points with straight line segments in order from \((100, 0)\) to \((1300, 0)\). — Reason: Connecting the plotted points in sequence with straight lines produces the frequency polygon, giving a visual picture of how the data is distributed across the different bill ranges.

Final Answer

The frequency polygon is obtained by plotting the points (100, 0), (300, 240), (500, 300), (700, 450), (900, 350), (1100, 160) and (1300, 0) on graph paper and joining them by straight line segments. The polygon peaks at the class 600-800 with 450 families.

Common Mistake

One common mistake: Students often plot the class boundaries (e.g. 200, 400, 600 …) on the x-axis instead of the class marks (300, 500, 700 …), which shifts every point to the wrong position and produces an incorrectly drawn polygon.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Compute Class Marks: 200-400: \( \frac{200+400}{2} = 300 \), 400-600: \( \frac{400+600}{2} = 500 \), 600-800: \( \frac{600+800}{2} = 700 \), 800-1000: \( \frac{800+1000}{2} = 900 \), 1000-1200: \( \frac{1000+1200}{2} = 1100 \)
  2. Step 2: Add Imaginary Classes (frequency = 0): 0-200: class mark \( = 100 \), frequency \( = 0 \); 1200-1400: class mark \( = 1300 \), frequency \( = 0 \)
  3. Step 3: List All Points to Plot: \( (100,\,0),\; (300,\,240),\; (500,\,300),\; (700,\,450),\; (900,\,350),\; (1100,\,160),\; (1300,\,0) \)

Answer: The frequency polygon is obtained by plotting the points (100, 0), (300, 240), (500, 300), (700, 450), (900, 350), (1100, 160) and (1300, 0) on graph paper and joining them by straight line segments. The polygon peaks at the class 600-800 with 450 families.

➕ More Examples

More Examples

Example 1

Question: The monthly pocket money (in rupees) of 40 students is given below. Draw a frequency polygon for the data. \nPocket Money (in Rs): 100–150, 150–200, 200–250, 250–300, 300–350, 350–400\nNumber of Students: 4, 8, 12, 9, 5, 2

Solution: Step 1: Find the class mark for each interval. \nFor 100–150: \[ \text{Class Mark} = \frac{100 + 150}{2} = 125 \]\nFor 150–200: \[ \text{Class Mark} = \frac{150 + 200}{2} = 175 \]\nFor 200–250: \[ \text{Class Mark} = \frac{200 + 250}{2} = 225 \]\nFor 250–300: \[ \text{Class Mark} = \frac{250 + 300}{2} = 275 \]\nFor 300–350: \[ \text{Class Mark} = \frac{300 + 350}{2} = 325 \]\nFor 350–400: \[ \text{Class Mark} = \frac{350 + 400}{2} = 375 \] \nStep 2: Add imaginary classes at the ends with frequency 0.\nBefore first class: 50–100, Class Mark = \( 75 \), Frequency = \( 0 \)\nAfter last class: 400–450, Class Mark = \( 425 \), Frequency = \( 0 \) \nStep 3: Table of class marks and frequencies for plotting: \nClass Mark: 75, 125, 175, 225, 275, 325, 375, 425\nFrequency: 0, 4, 8, 12, 9, 5, 2, 0 \nStep 4: Plot the points — \( (75, 0) \), \( (125, 4) \), \( (175, 8) \), \( (225, 12) \), \( (275, 9) \), \( (325, 5) \), \( (375, 2) \), \( (425, 0) \) — on graph paper with class marks on the x-axis and frequency on the y-axis. Join all consecutive points with straight lines to complete the frequency polygon.

Answer: Frequency polygon plotted using class marks 75, 125, 175, 225, 275, 325, 375, 425 against frequencies 0, 4, 8, 12, 9, 5, 2, 0 respectively.

Example 2

Question: The following table shows the scores of 50 students in a Science test. Draw a frequency polygon to represent this data. \nScores: 0–10, 10–20, 20–30, 30–40, 40–50, 50–60\nNumber of Students: 3, 7, 15, 13, 8, 4

Solution: Step 1: Compute the class mark (midpoint) for each class interval. \nFor 0–10: \[ \text{Class Mark} = \frac{0 + 10}{2} = 5 \]\nFor 10–20: \[ \text{Class Mark} = \frac{10 + 20}{2} = 15 \]\nFor 20–30: \[ \text{Class Mark} = \frac{20 + 30}{2} = 25 \]\nFor 30–40: \[ \text{Class Mark} = \frac{30 + 40}{2} = 35 \]\nFor 40–50: \[ \text{Class Mark} = \frac{40 + 50}{2} = 45 \]\nFor 50–60: \[ \text{Class Mark} = \frac{50 + 60}{2} = 55 \] \nStep 2: Add imaginary boundary classes with frequency 0.\nBefore first class: \( -10 \) to \( 0 \), Class Mark = \( -5 \), Frequency = \( 0 \)\nAfter last class: 60–70, Class Mark = \( 65 \), Frequency = \( 0 \) \nStep 3: Complete table for plotting: \nClass Mark: \(-5\), 5, 15, 25, 35, 45, 55, 65\nFrequency: 0, 3, 7, 15, 13, 8, 4, 0 \nStep 4: Plot the points — \( (-5, 0) \), \( (5, 3) \), \( (15, 7) \), \( (25, 15) \), \( (35, 13) \), \( (45, 8) \), \( (55, 4) \), \( (65, 0) \) — on graph paper with scores (class marks) on the x-axis and number of students on the y-axis. Join all consecutive points with straight lines to complete the frequency polygon.

Answer: Frequency polygon plotted using class marks \(-5\), 5, 15, 25, 35, 45, 55, 65 against frequencies 0, 3, 7, 15, 13, 8, 4, 0 respectively.

🎯 Try a Similar Question

Try a Similar Question

Question: The monthly savings (in rupees) of 80 employees in a company are given in the following table. Represent the data by a frequency polygon. \nMonthly Savings (in Rs) | Number of Employees 0 – 200 | 5 200 – 400 | 12 400 – 600 | 20 600 – 800 | 25 800 – 1000 | 10 1000 – 1200 | 8

Solution

  1. Step 1: Find the midpoints of each class interval: The midpoint (class mark) of each interval is calculated as \( \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \). \nFor 0–200: midpoint = \( \dfrac{0 + 200}{2} = 100 \) \nFor 200–400: midpoint = \( \dfrac{200 + 400}{2} = 300 \) \nFor 400–600: midpoint = \( \dfrac{400 + 600}{2} = 500 \) \nFor 600–800: midpoint = \( \dfrac{600 + 800}{2} = 700 \) \nFor 800–1000: midpoint = \( \dfrac{800 + 1000}{2} = 900 \) \nFor 1000–1200: midpoint = \( \dfrac{1000 + 1200}{2} = 1100 \)
  2. Step 2: Add imaginary classes at each end with zero frequency: To close the polygon, we add one imaginary class before the first interval and one after the last interval, each with frequency 0. \nImaginary class before: \(-200\) to \(0\), midpoint = \( \dfrac{-200 + 0}{2} = -100 \), frequency = 0. \nImaginary class after: \(1200\) to \(1400\), midpoint = \( \dfrac{1200 + 1400}{2} = 1300 \), frequency = 0.
  3. Step 3: List all the points to be plotted: The points (midpoint, frequency) to be plotted on the graph are: \( (-100,\ 0) \), \( (100,\ 5) \), \( (300,\ 12) \), \( (500,\ 20) \), \( (700,\ 25) \), \( (900,\ 10) \), \( (1100,\ 8) \), \( (1300,\ 0) \).
  4. Step 4: Draw the frequency polygon: Plot the x-axis as Monthly Savings (in Rs) and the y-axis as Number of Employees. Mark the points listed in Step 3 on the graph paper and join them in order with straight line segments. The resulting closed figure is the required frequency polygon.
  5. Step 5: Identify the peak: From the table, the class \(600\)–\(800\) has the highest frequency of \(25\) employees, so the polygon reaches its peak at the midpoint \(700\) on the x-axis.

Answer: The frequency polygon is obtained by plotting the points \( (-100,\ 0) \), \( (100,\ 5) \), \( (300,\ 12) \), \( (500,\ 20) \), \( (700,\ 25) \), \( (900,\ 10) \), \( (1100,\ 8) \), and \( (1300,\ 0) \) on graph paper and joining them by straight line segments. The polygon peaks at the class 600–800 with 25 employees.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5