SOLVER7 Study. Nothing Else.
Miscellaneous Problem Set 6 Q1 (iii)

Find the correct answer from the alternatives given.
Cumulative frequencies in a grouped frequency table are useful to find \(. . .\)
(A) Mean (B) Median (C) Mode (D) All of these

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine lining up all students by height. To find the middle student, you count how many students are before each point. That counting is called cumulative frequency. It helps you find the exact middle of the data. Mean uses a simple average, and mode just picks the most popular value. Neither needs that running count. Only the median needs it, because median means splitting data into two equal halves. So cumulative frequency is the special tool only the median uses.

Answer: (B) Median

📖 Use of Cumulative Frequency in Grouped Data

Detailed Explanation

In a grouped frequency distribution, the frequency tells us how many observations fall in each class interval. The cumulative frequency of a class is the sum of the frequency of that class and the frequencies of all classes before it. Cumulative frequency helps us locate the position of a particular observation in the ordered data. The median is the value that divides the data into two equal halves, so to find the median we need to know how observations accumulate up to a certain class. That is why cumulative frequency is used to identify the median class and then compute the median. On the other hand, the mean is found using the sum of \(f_i x_i\) divided by \(\sum f_i\), and the mode is found using the class with the highest frequency — neither of these requires cumulative frequency.

Formula Used

\[ \text{Median} = l + \left( \dfrac{\dfrac{N}{2} - cf}{f} \right) \times h \]

Solution

  1. Step 1: Recall the three measures of central tendency: Mean, Median and Mode. Check which of these actually requires cumulative frequency in its calculation.
  2. Step 2: Mean is calculated as \( \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} \). This uses only frequencies, not cumulative frequencies.
  3. Step 3: Mode is calculated using the modal class (class with maximum frequency) and the formula \( \text{Mode} = l + \left( \dfrac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \). This again uses frequencies of neighbouring classes, not cumulative frequencies.
  4. Step 4: Median requires locating the class where the \( \dfrac{N}{2} \)-th observation lies. To find this median class, we must compute cumulative frequencies and check where the cumulative frequency first becomes greater than or equal to \( \dfrac{N}{2} \). Hence cumulative frequency is essential for finding the median.
  5. Step 5: Therefore, among the given options, cumulative frequencies in a grouped frequency table are useful to find the Median.

Final Answer

(B) Median

Common Mistake

A common mistake is choosing option (D) All of these, thinking cumulative frequency is needed for every measure. In reality, only the median calculation requires cumulative frequency; mean and mode are found directly from the frequencies.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the three measures of central tendency: Mean, Median, and Mode. — Reason: We need to check each one to see which specifically relies on cumulative frequency in its calculation.
  2. Step 2: Examine how Mean is calculated. The formula is \[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} \] where \( f_i \) is the frequency of each class and \( x_i \) is the class midpoint. — Reason: Notice that only the individual frequencies \( f_i \) appear here, not cumulative frequencies, so Mean does NOT use cumulative frequency.
  3. Step 3: Examine how Mode is calculated. The formula is \[ \text{Mode} = l + \left( \dfrac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] where \( f_1 \) is the frequency of the modal class, \( f_0 \) is the frequency of the class before it, and \( f_2 \) is the frequency of the class after it. — Reason: Only the frequencies of three neighbouring classes appear; no cumulative frequency is needed, so Mode does NOT use cumulative frequency.
  4. Step 4: Understand why Median needs cumulative frequency. The Median divides all observations into two equal halves. To find which class contains the middle value, we must first compute \( \dfrac{N}{2} \) and then scan through the cumulative frequencies to locate the class where this value falls. — Reason: Without cumulative frequencies, we cannot pinpoint the median class at all.
  5. Step 5: Apply the Median formula once the median class is identified: \[ \text{Median} = l + \left( \dfrac{\dfrac{N}{2} - cf}{f} \right) \times h \] Here \( cf \) is the cumulative frequency of all classes before the median class. — Reason: The term \( \dfrac{N}{2} - cf \) tells us how many more observations we still need to count inside the median class to reach the exact middle, which is why cumulative frequency is indispensable.
  6. Step 6: Conclude by elimination: Mean uses only \( f_i \) and \( x_i \); Mode uses only \( f_0, f_1, f_2 \); only Median uses the cumulative frequency \( cf \) explicitly in its formula. — Reason: Therefore, the measure of central tendency that requires constructing a cumulative frequency table is the Median.

Final Answer

(B) Median

Common Mistake

One common mistake: Students sometimes think Mode uses cumulative frequency because it involves multiple frequency values, but those are simply the frequencies of adjacent classes, not cumulative frequencies.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Mean formula: \[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} \] — uses only frequencies, not cumulative frequencies.
  2. Step 2: Mode formula: \[ \text{Mode} = l + \left( \dfrac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] — uses class frequencies only, not cumulative frequencies.
  3. Step 3: Median requires locating the class containing the \( \dfrac{N}{2} \)-th observation, which requires cumulative frequency \( cf \).

Answer: (B) Median

➕ More Examples

More Examples

Example 1

Question: Choose the correct option from the alternatives given. \nIn a grouped frequency distribution, which measure of central tendency is determined using a cumulative frequency curve (ogive)? (A) Mode (B) Mean (C) Median (D) Range

Solution: Let us analyse each option: \nOption (A) — Mode: The mode is found using the modal class, which is the class with the highest frequency. Cumulative frequencies are NOT needed for this. \nOption (B) — Mean: The mean is calculated using the formula \[ \bar{x} = \frac{\sum f_i x_i}{\sum f_i} \] where \( x_i \) are class marks and \( f_i \) are frequencies. Cumulative frequencies are NOT required here. \nOption (C) — Median: The median divides the distribution into two equal halves. To locate the median class and apply the median formula, we must compute cumulative frequencies. The ogive (cumulative frequency curve) is specifically drawn to locate the median graphically. \nOption (D) — Range: Range is simply the difference between the maximum and minimum values, and does not use cumulative frequencies. \nTherefore, cumulative frequencies and the ogive are used to find the Median.

Answer: (C) Median

Example 2

Question: Choose the correct option from the alternatives given. \nA teacher draws a 'less than ogive' from a frequency distribution table of students' marks. Which of the following can be directly estimated from this ogive? (A) Mean marks (B) Modal marks (C) Median marks (D) Both Mean and Mode

Solution: Let us think about what a 'less than ogive' represents. \nA 'less than ogive' is obtained by plotting upper class boundaries on the x-axis against cumulative frequencies (less than type) on the y-axis. This graph shows how many students scored less than each boundary value. \nTo find the Median from this ogive:\nStep 1: Find the total number of students, \( n \).\nStep 2: Locate \( \frac{n}{2} \) on the y-axis.\nStep 3: Draw a horizontal line from \( \frac{n}{2} \) to meet the ogive, then drop a vertical line to the x-axis. The value on the x-axis is the Median. \nThis method uses cumulative frequencies and is a standard graphical technique to find the Median. \nThe Mean requires \( \sum f_i x_i \) and cannot be read off an ogive. The Mode depends on the highest frequency bar in the histogram, not on the ogive. \nHence, the 'less than ogive' is used to estimate the Median marks.

Answer: (C) Median marks

🎯 Try a Similar Question

Try a Similar Question

Question: Choose the correct option from the alternatives given. In a grouped frequency distribution table, which measure of central tendency can be determined DIRECTLY from the class frequencies and the corresponding class midpoints, WITHOUT needing cumulative frequencies? (A) Median (B) Mode (C) Mean (D) Both (B) and (C)

Solution

  1. Step 1: Recall how each measure is calculated: Mean: We use the formula \[\bar{x} = \frac{\sum f_i x_i}{\sum f_i}\] where \( f_i \) is the frequency of each class and \( x_i \) is the midpoint of each class. No cumulative frequency is needed.
  2. Step 2: Check Mode: Mode is found by identifying the modal class — the class with the highest frequency \( f_i \). The formula is \[Mode = l + \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \times h\] where \( f_1 \) is the frequency of the modal class, \( f_0 \) and \( f_2 \) are frequencies of the classes before and after it, \( l \) is the lower boundary, and \( h \) is the class width. Again, no cumulative frequency is needed.
  3. Step 3: Check Median: Median requires finding the median class using cumulative frequencies. The formula is \[Median = l + \frac{\frac{n}{2} - cf}{f} \times h\] where \( cf \) is the cumulative frequency before the median class. Without cumulative frequencies, the Median class cannot be identified.
  4. Step 4: Identify the correct answer: Both Mean and Mode can be calculated directly using class frequencies and midpoints, without needing cumulative frequencies. So the correct answer is option (D): Both (B) and (C).

Answer: (D) Both (B) and (C) — i.e., both Mode and Mean can be found directly from class frequencies (and midpoints), without using cumulative frequencies.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5