SOLVER7 Study. Nothing Else.
Practice Set 6.4 Q3

In the following table, the investment made by \(210\) families is shown. Present it in the form of a histogram.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing tall towers of blocks, one for each group of families. Each tower's height shows how many families belong to that group. The groups are based on how much money families invest, like 10 to 15 thousand rupees. The tallest tower tells you which group has the most families. Here, the group from 20 to 25 thousand rupees has the most families, so its tower is the tallest of all five towers.

Answer: The histogram is drawn with class intervals 10-15, 15-20, 20-25, 25-30, 30-35 on the x-axis and frequencies 30, 50, 60, 55, 15 as the heights of the corresponding rectangles. The modal class (tallest bar) is 20-25.

📖 Histogram of Investment Data

Detailed Explanation

A histogram is a graphical representation of grouped (continuous) frequency distribution. It consists of rectangles drawn on the class intervals as bases, and their heights are proportional to the frequencies. Since the class intervals are continuous and of equal width, the rectangles are drawn adjacent to each other without any gaps. The x-axis represents the class intervals (here, investment in thousand rupees) and the y-axis represents the frequency (number of families). Because our x-axis does not start from 0 (it starts from 10), we use a kink (zig-zag mark) near the origin to indicate the break in the scale.

Formula Used

Height of each rectangle = Frequency of the class (since all class widths are equal). Total frequency \( = \sum f_i \).

Solution

  1. Step 1: Check the class intervals: The class intervals are 10-15, 15-20, 20-25, 25-30, 30-35. Each class has the same width of \( 5 \) thousand rupees, so we can directly use the frequency as the height of each bar.
  2. Step 2: Verify the total frequency: Add all the frequencies: \[ 30 + 50 + 60 + 55 + 15 = 210 \] This matches the given total of 210 families, so the data is consistent.
  3. Step 3: Choose the axes and scale: Take the class intervals (Investment in Thousand Rupees) along the x-axis and the number of families along the y-axis. On the x-axis, since the classes start from 10 (not 0), use a kink (zig-zag) between 0 and 10. Suitable scales: on x-axis, 1 cm = 5 thousand rupees; on y-axis, 1 cm = 10 families.
  4. Step 4: Draw the rectangles: For each class interval, draw a rectangle with the class interval as the base and the corresponding frequency as the height: - 10-15 with height 30 - 15-20 with height 50 - 20-25 with height 60 - 25-30 with height 55 - 30-35 with height 15
  5. Step 5: Complete the histogram: Since class intervals are continuous, draw the rectangles adjacent to each other without leaving any gap. Label the axes clearly and give a title such as Histogram showing Investment of 210 Families.
  6. Step 6: Interpret the histogram: From the histogram, the tallest rectangle corresponds to the class 20-25 (60 families), which shows that most families invest between \( 20 \) and \( 25 \) thousand rupees. The shortest rectangle is for 30-35 (only 15 families).

Final Answer

The histogram is drawn with class intervals 10-15, 15-20, 20-25, 25-30, 30-35 on the x-axis and frequencies 30, 50, 60, 55, 15 as the heights of the corresponding rectangles. The modal class (tallest bar) is 20-25.

Common Mistake

A common mistake is leaving gaps between the rectangles as in a bar graph. In a histogram, the class intervals are continuous, so the rectangles must be drawn adjacent to each other with no space between them. Also, students often forget to show the kink on the x-axis when the scale does not begin at 0.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the class intervals and their corresponding frequencies from the data table: 10-15 has frequency 30, 15-20 has frequency 50, 20-25 has frequency 60, 25-30 has frequency 55, and 30-35 has frequency 15. — Reason: Organising the data first ensures we know exactly how many rectangles to draw and what height each one must have.
  2. Step 2: Check that each class has the same width. The width of every interval is \( 25 - 20 = 5 \) thousand rupees (and similarly for all others), so all widths equal \( 5 \). — Reason: Equal class widths mean we can use frequency directly as the bar height; no adjustment for unequal widths is needed here.
  3. Step 3: Verify the total frequency by adding all values: \[ 30 + 50 + 60 + 55 + 15 = 210 \] This matches the stated total of 210 families. — Reason: A quick sum-check confirms the data is consistent and that no class has been accidentally left out.
  4. Step 4: Set up the axes. Place class intervals (Investment in Thousand Rupees) along the x-axis and number of families along the y-axis. Use a suggested scale of 1 cm = 5 thousand rupees on the x-axis and 1 cm = 10 families on the y-axis. — Reason: Choosing appropriate scales keeps the histogram compact, readable, and proportional on graph paper.
  5. Step 5: Since the x-axis begins at 10 rather than 0, mark a kink (zig-zag break) between the origin and the value 10 on the x-axis. — Reason: The kink signals to the reader that the scale does not start from zero, preventing misinterpretation of the graph.
  6. Step 6: Draw five adjacent rectangles with no gaps between them. Each rectangle sits on its class interval as the base, and its height matches the class frequency: heights are 30, 50, 60, 55, and 15 for the intervals 10-15, 15-20, 20-25, 25-30, and 30-35 respectively. — Reason: Adjacent rectangles (no gaps) are the defining feature of a histogram for continuous data, distinguishing it from a bar chart used for discrete data.
  7. Step 7: Identify the tallest rectangle. The bar for the class 20-25 reaches a height of 60, which is the highest among all bars. This class is therefore called the modal class. — Reason: The modal class is the one with the highest frequency; it is read directly from the histogram as the tallest bar.

Final Answer

The histogram is drawn with class intervals 10-15, 15-20, 20-25, 25-30, 30-35 on the x-axis and frequencies 30, 50, 60, 55, 15 as the heights of the corresponding rectangles. The modal class (tallest bar) is 20-25.

Common Mistake

One common mistake: Forgetting to draw a kink (zig-zag mark) on the x-axis between 0 and 10. Without this symbol, the histogram falsely implies that the scale starts from zero, making the bars look disproportionately short and misleading the reader about the actual range of data.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Class intervals: 10-15, 15-20, 20-25, 25-30, 30-35 (equal width = 5); Frequencies: 30, 50, 60, 55, 15.
  2. Step 2: Verify total: \[ 30 + 50 + 60 + 55 + 15 = 210 \] Total matches given data.
  3. Step 3: Plot histogram: x-axis = class intervals (use kink between 0 and 10), y-axis = frequency; height of each bar equals its frequency directly (equal class widths).
  4. Step 4: Tallest bar corresponds to class 20-25 (frequency = 60), so modal class = 20-25.

Answer: The histogram is drawn with class intervals 10-15, 15-20, 20-25, 25-30, 30-35 on the x-axis and frequencies 30, 50, 60, 55, 15 as the heights of the corresponding rectangles. The modal class (tallest bar) is 20-25.

➕ More Examples

More Examples

Example 1

Question: The following table shows the number of hours 150 students spend on studying per week. Draw a histogram to represent the data. \nHours studied per week | Number of Students 0 – 5 | 10 5 – 10 | 30 10 – 15 | 45 15 – 20 | 35 20 – 25 | 20 25 – 30 | 10

Solution: Step 1: Identify the class intervals and frequencies. \nClass intervals: 0–5, 5–10, 10–15, 15–20, 20–25, 25–30. \nFrequencies: 10, 30, 45, 35, 20, 10. \nStep 2: Check class widths. \nEach class width = \( 5 - 0 = 5 \), which is equal for all classes. \nStep 3: Since class widths are equal, the height of each bar equals its frequency directly. \nStep 4: Draw the histogram. \nOn the x-axis, mark the class intervals: 0, 5, 10, 15, 20, 25, 30. \nOn the y-axis, mark the frequency scale: 0, 5, 10, 15, ..., 45. \nDraw adjacent bars with the following heights: \nBar for 0–5: height = 10 \nBar for 5–10: height = 30 \nBar for 10–15: height = 45 \nBar for 15–20: height = 35 \nBar for 20–25: height = 20 \nBar for 25–30: height = 10 \nStep 5: Verify the total. \nTotal = \( 10 + 30 + 45 + 35 + 20 + 10 = 150 \) \nThis matches the total number of students, so the histogram is correct. \nStep 6: Label the x-axis as "Hours studied per week" and the y-axis as "Number of Students", and give the histogram an appropriate title.

Answer: A histogram is drawn with 6 adjacent bars over the intervals 0–5, 5–10, 10–15, 15–20, 20–25, 25–30 with heights 10, 30, 45, 35, 20, and 10 respectively. The tallest bar is for the interval 10–15 (45 students).

Example 2

Question: The monthly savings (in rupees) of 180 employees in a company are recorded in the table below. Draw a histogram to represent the data. \nMonthly Savings (Rs) | Number of Employees 500 – 1000 | 20 1000 – 1500 | 40 1500 – 2000 | 55 2000 – 2500 | 35 2500 – 3000 | 18 3000 – 3500 | 12

Solution: Step 1: List the class intervals and their frequencies. \nClass intervals: 500–1000, 1000–1500, 1500–2000, 2000–2500, 2500–3000, 3000–3500. \nFrequencies: 20, 40, 55, 35, 18, 12. \nStep 2: Check class widths. \nEach class width = \( 1000 - 500 = 500 \), which is uniform across all classes. \nStep 3: Since class widths are equal, height of each bar = frequency of that class. \nStep 4: Set up the axes. \nX-axis: Monthly savings in rupees, marked at 500, 1000, 1500, 2000, 2500, 3000, 3500. \nY-axis: Number of employees, marked at 0, 5, 10, ..., 55. \nStep 5: Draw the adjacent bars. \nBar for 500–1000: height = 20 \nBar for 1000–1500: height = 40 \nBar for 1500–2000: height = 55 \nBar for 2000–2500: height = 35 \nBar for 2500–3000: height = 18 \nBar for 3000–3500: height = 12 \nStep 6: Verify the total. \nTotal = \( 20 + 40 + 55 + 35 + 18 + 12 = 180 \) \nThis matches the total number of employees, confirming accuracy. \nStep 7: Label the x-axis as "Monthly Savings (Rs)", the y-axis as "Number of Employees", and provide a suitable title for the histogram.

Answer: A histogram is drawn with 6 adjacent bars over the intervals 500–1000, 1000–1500, 1500–2000, 2000–2500, 2500–3000, 3000–3500 with heights 20, 40, 55, 35, 18, and 12 respectively. The tallest bar corresponds to the interval 1500–2000 (55 employees).

🎯 Try a Similar Question

Try a Similar Question

Question: The following table shows the number of hours per week spent on outdoor activities by 180 students in a school. Draw a histogram to represent this data and identify the modal class. \nHours per week | Number of Students 5–10 | 20 10–15 | 45 15–20 | 65 20–25 | 35 25–30 | 15

Solution

  1. Step 1: Identify the class intervals and frequencies: From the table, the class intervals are 5–10, 10–15, 15–20, 20–25, and 25–30. The corresponding frequencies (number of students) are 20, 45, 65, 35, and 15 respectively. Verify the total: \[20 + 45 + 65 + 35 + 15 = 180\] which matches the total number of students.
  2. Step 2: Check that class intervals are equal: Each class interval has width \[25 - 20 = 5\] hours (same for all intervals). Since all widths are equal, the height of each bar is directly equal to the frequency of that class. No adjustment for unequal widths is needed.
  3. Step 3: Set up the axes: Draw the horizontal axis (x-axis) to represent the class intervals (Hours per week) from 5 to 30, marked at 5, 10, 15, 20, 25, 30. Draw the vertical axis (y-axis) to represent the Number of Students, with a suitable scale (e.g., 1 cm = 10 students), going up to at least 65.
  4. Step 4: Draw the bars: Draw five adjacent rectangles (no gaps between them) with the following heights: - 5–10: height = 20 - 10–15: height = 45 - 15–20: height = 65 - 20–25: height = 35 - 25–30: height = 15\nEach rectangle must touch the next, as histograms represent continuous data.
  5. Step 5: Identify the modal class: The modal class is the class interval with the highest frequency. Here, the class 15–20 has the highest frequency of \(65\). Therefore, the modal class is 15–20. This corresponds to the tallest bar in the histogram.

Answer: The histogram is drawn with class intervals 5–10, 10–15, 15–20, 20–25, 25–30 on the x-axis and frequencies 20, 45, 65, 35, 15 as the heights of the corresponding rectangles. The modal class (tallest bar) is 15–20.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5