SOLVER7 Study. Nothing Else.
Practice Set 6.4 Q2

The table below shows the yield of jowar per acre. Show the data by histogram.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine making a bar chart to show how many farmers grew different amounts of crops. The tricky part is that the groups like 2-3, 4-5, 6-7 have tiny gaps between them. Bars in a histogram must touch each other with no gaps. So we nudge each group a little, subtracting 0.5 from the left side and adding 0.5 to the right side. Now all the bars fit neatly together. The tallest bar shows that 55 farmers had the best yield in the 6-7 quintal range.

Answer: The histogram is drawn with continuous class intervals \(1.5\)-\(3.5\), \(3.5\)-\(5.5\), \(5.5\)-\(7.5\), \(7.5\)-\(9.5\), \(9.5\)-\(11.5\) on the x-axis and frequencies 30, 50, 55, 40, 20 on the y-axis. The tallest bar (55 farmers) corresponds to the class 5.5-7.5 (yield 6-7 quintal).

📖 Histogram for Jowar Yield per Acre

Detailed Explanation

A histogram is a graphical representation of grouped (continuous) frequency data using rectangles. The class intervals are shown on the x-axis and the frequencies (here, the number of farmers) on the y-axis. The height of each rectangle corresponds to the frequency of that class. Since the given class intervals are inclusive (2-3, 4-5, 6-7, etc.), we must first convert them into continuous (exclusive) intervals so that there are no gaps between the bars. This is done by subtracting 0.5 from each lower limit and adding 0.5 to each upper limit.

Formula Used

Adjustment factor \(= \dfrac{\text{lower limit of a class} - \text{upper limit of previous class}}{2}\). For this data, adjustment \(= \dfrac{4-3}{2} = 0.5\).

Solution

  1. Step 1: Identify the type of class intervals: The given intervals are 2-3, 4-5, 6-7, 8-9, 10-11. There is a gap of 1 unit between successive classes (for example between 3 and 4). This means the intervals are inclusive (discontinuous), so they must be converted to continuous form before drawing the histogram.
  2. Step 2: Find the adjustment factor: Adjustment factor \(= \dfrac{4 - 3}{2} = 0.5\). Subtract 0.5 from each lower limit and add 0.5 to each upper limit.
  3. Step 3: Write the continuous class intervals: The new continuous intervals along with their frequencies are: \(1.5\)-\(3.5\): 30 farmers; \(3.5\)-\(5.5\): 50 farmers; \(5.5\)-\(7.5\): 55 farmers; \(7.5\)-\(9.5\): 40 farmers; \(9.5\)-\(11.5\): 20 farmers.
  4. Step 4: Choose the scale for the axes: On the x-axis, take 'Yield per acre (in quintal)' and mark the continuous class intervals. Since the values start from 1.5, use a kink (zig-zag) mark between 0 and 1.5 to indicate the break. Suitable scale: 1 cm = 1 quintal on x-axis. On the y-axis, take 'Number of farmers' with scale 1 cm = 10 farmers, since the maximum frequency is 55.
  5. Step 5: Draw the rectangles: Draw adjacent rectangles (bars) for each class interval on the x-axis. The width of each bar corresponds to the class width (2 units) and the height corresponds to the frequency:\nBar 1: from 1.5 to 3.5, height 30\nBar 2: from 3.5 to 5.5, height 50\nBar 3: from 5.5 to 7.5, height 55\nBar 4: from 7.5 to 9.5, height 40\nBar 5: from 9.5 to 11.5, height 20.
  6. Step 6: Label the histogram: Give the histogram a suitable title such as 'Histogram showing yield of jowar per acre'. Label the x-axis as 'Yield per acre (quintal)' and the y-axis as 'Number of farmers'. The tallest bar will be at the interval 5.5-7.5 (55 farmers) showing that the maximum number of farmers had a yield of 6-7 quintal per acre.

Final Answer

The histogram is drawn with continuous class intervals \(1.5\)-\(3.5\), \(3.5\)-\(5.5\), \(5.5\)-\(7.5\), \(7.5\)-\(9.5\), \(9.5\)-\(11.5\) on the x-axis and frequencies 30, 50, 55, 40, 20 on the y-axis. The tallest bar (55 farmers) corresponds to the class 5.5-7.5 (yield 6-7 quintal).

Common Mistake

A very common mistake is to draw the histogram directly using the given inclusive class intervals (2-3, 4-5, ...), which creates gaps between the bars. Always convert inclusive intervals to continuous (exclusive) intervals using the adjustment factor before drawing a histogram.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Examine the given class intervals: The given yield intervals are 2–3, 4–5, 6–7, 8–9, and 10–11 (in quintals per hectare). Notice there is a gap of 1 unit between consecutive classes (e.g., between 3 and 4, between 5 and 6). — Reason: Histograms require continuous (gap-free) intervals so that bars touch each other; the presence of gaps tells us the intervals are in inclusive (discontinuous) form and must be adjusted.
  2. Step 2: Calculate the adjustment factor: Take any two consecutive classes, say 2–3 and 4–5. The adjustment factor is \[\frac{4 - 3}{2} = \frac{1}{2} = 0.5\] — Reason: This half-gap value is subtracted from every lower limit and added to every upper limit so the classes become perfectly continuous with no overlap and no gap.
  3. Step 3: Convert each class to continuous form: Apply the adjustment: subtract \(0.5\) from each lower limit and add \(0.5\) to each upper limit. The original class 2–3 becomes \(2 - 0.5\) to \(3 + 0.5\), i.e., \(1.5\)–\(3.5\). Similarly, 4–5 becomes \(3.5\)–\(5.5\); 6–7 becomes \(5.5\)–\(7.5\); 8–9 becomes \(7.5\)–\(9.5\); and 10–11 becomes \(9.5\)–\(11.5\). — Reason: These new boundaries ensure all bars in the histogram are adjacent, which is the defining visual property of a histogram.
  4. Step 4: Pair each continuous interval with its frequency: The updated frequency table is: \(1.5\)–\(3.5\) → 30 farmers; \(3.5\)–\(5.5\) → 50 farmers; \(5.5\)–\(7.5\) → 55 farmers; \(7.5\)–\(9.5\) → 40 farmers; \(9.5\)–\(11.5\) → 20 farmers. — Reason: Frequencies remain unchanged during conversion; only the class boundaries are adjusted.
  5. Step 5: Set up the axes and choose a scale: On the x-axis, mark the continuous class boundaries: 1.5, 3.5, 5.5, 7.5, 9.5, 11.5. On the y-axis, mark the frequency values starting from 0. A suitable scale for the y-axis is 1 cm = 10 farmers, so the maximum value needed is 55. — Reason: A clear, consistent scale ensures the heights of the bars accurately represent the frequencies and the histogram is easy to read.
  6. Step 6: Draw the histogram bars: Draw five adjacent rectangles. The width of each bar spans its class interval (each bar has equal width of 2 units), and the height of each bar equals its frequency. The bar heights are 30, 50, 55, 40, and 20 respectively. The tallest bar stands over the interval \(5.5\)–\(7.5\) with height 55. — Reason: In a histogram with equal class widths, the height of each bar directly represents the frequency, making it easy to compare the number of farmers across yield groups.

Final Answer

The histogram is drawn with continuous class intervals \(1.5\)-\(3.5\), \(3.5\)-\(5.5\), \(5.5\)-\(7.5\), \(7.5\)-\(9.5\), \(9.5\)-\(11.5\) on the x-axis and frequencies 30, 50, 55, 40, 20 on the y-axis. The tallest bar (55 farmers) corresponds to the class 5.5-7.5 (yield 6-7 quintal).

Common Mistake

One common mistake: Students forget to convert the inclusive (discontinuous) class intervals to continuous form before drawing the histogram, resulting in bars with visible gaps between them — which is incorrect for a histogram.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given inclusive intervals: 2-3, 4-5, 6-7, 8-9, 10-11 with frequencies 30, 50, 55, 40, 20.
  2. Step 2: Subtract 0.5 from each lower limit and add 0.5 to each upper limit to get continuous intervals.
  3. Step 3: Continuous class intervals: \( 1.5\text{-}3.5 \): 30, \( 3.5\text{-}5.5 \): 50, \( 5.5\text{-}7.5 \): 55, \( 7.5\text{-}9.5 \): 40, \( 9.5\text{-}11.5 \): 20.
  4. Step 4: Plot continuous intervals on x-axis and frequencies on y-axis; draw bars of heights 30, 50, 55, 40, 20 with no gaps.

Answer: The histogram is drawn with continuous class intervals \(1.5\)-\(3.5\), \(3.5\)-\(5.5\), \(5.5\)-\(7.5\), \(7.5\)-\(9.5\), \(9.5\)-\(11.5\) on the x-axis and frequencies 30, 50, 55, 40, 20 on the y-axis. The tallest bar (55 farmers) corresponds to the class 5.5-7.5 (yield 6-7 quintal).

➕ More Examples

More Examples

Example 1

Question: The table below shows the daily wages (in rupees) of workers in a factory. Draw a histogram to represent the data. \nDaily Wages (Rs): 200–250, 250–300, 300–350, 350–400, 400–450\nNumber of Workers: 8, 14, 22, 10, 6

Solution: We follow the steps to draw the histogram. \nStep 1: Note the class intervals and frequencies:\nDaily Wages 200–250: 8 workers\nDaily Wages 250–300: 14 workers\nDaily Wages 300–350: 22 workers\nDaily Wages 350–400: 10 workers\nDaily Wages 400–450: 6 workers \nStep 2: Draw the x-axis. Mark the class intervals starting from 200 with equal width of 50 each: 200–250, 250–300, 300–350, 350–400, 400–450. \nStep 3: Draw the y-axis. Since the maximum frequency is 22, choose a scale such as 1 cm = 4 workers. Mark values 0, 4, 8, 12, 16, 20, 24 on the y-axis. \nStep 4: Draw adjacent bars for each class interval:\nBar 1 (200–250): height = 8\nBar 2 (250–300): height = 14\nBar 3 (300–350): height = 22\nBar 4 (350–400): height = 10\nBar 5 (400–450): height = 6 \nThe bars touch each other with no gaps, since the data is continuous. \nStep 5: Label the x-axis as 'Daily Wages (in Rs)' and the y-axis as 'Number of Workers'. Give the title 'Histogram of Daily Wages of Workers'. \nThe tallest bar is for the class interval 300–350 with frequency 22, indicating the highest concentration of workers earn between Rs 300 and Rs 350 per day. \nTotal number of workers: \[ 8 + 14 + 22 + 10 + 6 = 60 \]

Answer: A histogram with 5 adjacent bars over intervals 200–250, 250–300, 300–350, 350–400, 400–450, with heights 8, 14, 22, 10, and 6 respectively. The modal class is 300–350 with the highest frequency of 22.

Example 2

Question: The following table shows the marks scored by 50 students in a class test (out of 50). Draw a histogram for the data. \nMarks: 0–10, 10–20, 20–30, 30–40, 40–50\nNumber of Students: 4, 9, 18, 13, 6

Solution: We follow the steps to draw the histogram. \nStep 1: Note the class intervals and frequencies:\nMarks 0–10: 4 students\nMarks 10–20: 9 students\nMarks 20–30: 18 students\nMarks 30–40: 13 students\nMarks 40–50: 6 students \nVerify total: \[ 4 + 9 + 18 + 13 + 6 = 50 \] This matches the given total of 50 students. \nStep 2: Draw the x-axis. Mark class intervals starting from 0 with equal width of 10 each: 0–10, 10–20, 20–30, 30–40, 40–50. \nStep 3: Draw the y-axis. The maximum frequency is 18. Choose a scale such as 1 cm = 2 students. Mark 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20 on the y-axis. \nStep 4: Draw adjacent bars for each class interval:\nBar 1 (0–10): height = 4\nBar 2 (10–20): height = 9\nBar 3 (20–30): height = 18\nBar 4 (30–40): height = 13\nBar 5 (40–50): height = 6 \nAll bars must touch each other (no gaps between consecutive bars), as marks form a continuous variable. \nStep 5: Label the x-axis as 'Marks' and the y-axis as 'Number of Students'. Give the title 'Histogram of Marks Scored by Students'. \nThe highest bar is for 20–30 with frequency 18, so the modal class is 20–30. This means the largest group of students scored between 20 and 30 marks.

Answer: A histogram with 5 adjacent bars over intervals 0–10, 10–20, 20–30, 30–40, 40–50, with heights 4, 9, 18, 13, and 6 respectively. The modal class is 20–30 with the highest frequency of 18.

🎯 Try a Similar Question

Try a Similar Question

Question: The table below shows the number of workers in a factory classified by their daily wages (in rupees). Draw a histogram to represent this data. \nDaily Wages (₹): 100–104, 105–109, 110–114, 115–119, 120–124\nNumber of Workers: 18, 32, 45, 28, 12

Solution

  1. Step 1: Check whether class intervals are continuous: The given class intervals are 100–104, 105–109, 110–114, 115–119, 120–124. The upper boundary of the first class is 104, but the lower boundary of the next class is 105. There is a gap of 1 between consecutive classes, so the intervals are NOT continuous.
  2. Step 2: Find the adjustment factor: Adjustment factor = (lower limit of next class − upper limit of current class) ÷ 2. Here, adjustment factor = (105 − 104) ÷ 2 = 0.5. Subtract 0.5 from each lower boundary and add 0.5 to each upper boundary to make the intervals continuous.
  3. Step 3: Write the continuous class intervals: Original → Continuous: 100–104 → 99.5–104.5 105–109 → 104.5–109.5 110–114 → 109.5–114.5 115–119 → 114.5–119.5 120–124 → 119.5–124.5\nEach continuous class has a width of 5.
  4. Step 4: Prepare the frequency table for the histogram: The continuous class intervals and their corresponding frequencies are:\nClass 99.5–104.5: 18 workers\nClass 104.5–109.5: 32 workers\nClass 109.5–114.5: 45 workers\nClass 114.5–119.5: 28 workers\nClass 119.5–124.5: 12 workers
  5. Step 5: Draw the histogram: On the x-axis, mark the continuous class boundaries: 99.5, 104.5, 109.5, 114.5, 119.5, 124.5 (representing daily wages in rupees). On the y-axis, mark the number of workers with a suitable scale (e.g., 1 cm = 5 workers). Draw adjacent rectangles (bars) for each class with heights equal to the respective frequencies: 18, 32, 45, 28, and 12. All bars touch each other since the intervals are now continuous.
  6. Step 6: Identify the tallest bar: The tallest bar corresponds to the class 109.5–114.5 (original class 110–114) with a frequency of 45 workers. This is the modal class — the class with the highest number of workers.

Answer: The histogram is drawn with continuous class intervals 99.5–104.5, 104.5–109.5, 109.5–114.5, 114.5–119.5, and 119.5–124.5 on the x-axis (daily wages in ₹) and frequencies 18, 32, 45, 28, and 12 on the y-axis (number of workers). The tallest bar (45 workers) corresponds to the class 109.5–114.5 (original wages ₹110–₹114).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5