SOLVER7 Study. Nothing Else.
Practice Set 6.5 Q1 (iv)

Observe the following frequency polygon and write the answers of the questions below it.
Write the lower and upper class limits of the class whose class mark is \(85.\)

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Think of a class mark like the middle point of a ruler segment. If the middle is at 85, the segment stretches equally on both sides. The gap between neighboring middle points is 10, so each side gets 5. Go 5 below 85 and you land on 80. Go 5 above 85 and you land on 90. Those two endpoints are the edges of your group. It is just like finding where a seesaw starts and ends when you know its center.

Answer: Lower class limit \( = 80 \) and Upper class limit \( = 90 \). The class is 80 - 90.

📖 Class Limits from Class Mark in Frequency Polygon

Detailed Explanation

In a frequency polygon, each point is plotted using the class mark (midpoint of a class) on the X-axis and the frequency on the Y-axis. The class mark is the average of the lower and upper class limits. To find the class limits from a class mark, we need to know the class size (width). From the graph, consecutive class marks are 25, 35, 45, 55, 65, 75, 85, 95, which means the class size is 10. Using the class mark and class size, we can find both the lower and upper limits of the class.

Formula Used

\[ \text{Class Mark} = \frac{\text{Lower Limit} + \text{Upper Limit}}{2} \] \[ \text{Lower Limit} = \text{Class Mark} - \frac{\text{Class Size}}{2} \] \[ \text{Upper Limit} = \text{Class Mark} + \frac{\text{Class Size}}{2} \]

Solution

  1. Step 1: Identify the class size: Observe the class marks on the X-axis of the frequency polygon: 35, 45, 55, 65, 75, 85. The difference between two consecutive class marks gives the class size. So class size \( = 45 - 35 = 10 \).
  2. Step 2: Use the class mark formula: Given class mark \( = 85 \) and class size \( = 10 \). Half of the class size is \( \frac{10}{2} = 5 \).
  3. Step 3: Find the lower limit: \[ \text{Lower Limit} = 85 - 5 = 80 \]
  4. Step 4: Find the upper limit: \[ \text{Upper Limit} = 85 + 5 = 90 \]
  5. Step 5: Verify: Class mark \( = \frac{80 + 90}{2} = \frac{170}{2} = 85 \). This matches the given class mark, so the class is 80 - 90.

Final Answer

Lower class limit \( = 80 \) and Upper class limit \( = 90 \). The class is 80 - 90.

Common Mistake

Students often forget to divide the class size by 2 and instead subtract or add the full class size (10) from the class mark, giving incorrect limits like 75 and 95 instead of 80 and 90.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read the class marks from the X-axis of the frequency polygon. The plotted class marks are 35, 45, 55, 65, 75, 85. — Reason: We need these values to determine how wide each class interval is.
  2. Step 2: Find the class size by subtracting any two consecutive class marks: \[45 - 35 = 10\] So the class size is 10. — Reason: The gap between consecutive class marks equals the width of each class interval, which we need for both limit calculations.
  3. Step 3: Compute half the class size: \[\frac{10}{2} = 5\] — Reason: The lower and upper limits lie exactly 5 units below and above the class mark respectively, so we need this half-width value before applying the formulas.
  4. Step 4: Apply the Lower Limit formula using the given class mark of 85: \[\text{Lower Limit} = 85 - 5 = 80\] — Reason: Subtracting half the class size from the class mark gives the starting boundary of the class interval.
  5. Step 5: Apply the Upper Limit formula using the same class mark of 85: \[\text{Upper Limit} = 85 + 5 = 90\] — Reason: Adding half the class size to the class mark gives the ending boundary of the class interval.
  6. Step 6: Verify by checking that the average of the two limits equals the original class mark: \[\frac{80 + 90}{2} = \frac{170}{2} = 85\] This matches the given class mark of 85. — Reason: This confirmation step ensures no arithmetic error was made; if the result did not equal 85, we would need to recheck our work.

Final Answer

Lower class limit \( = 80 \) and Upper class limit \( = 90 \). The class is 80 - 90.

Common Mistake

One common mistake: Students sometimes subtract the class size itself (10) instead of half the class size (5) from the class mark, giving an incorrect lower limit of 75 instead of 80.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Class size = difference between consecutive class marks: \ \( 45 - 35 = 10 \)
  2. Step 2: Given class mark \( = 85 \), half of class size \( = \frac{10}{2} = 5 \)
  3. Step 3: Lower Limit: \[ 85 - 5 = 80 \] Upper Limit: \[ 85 + 5 = 90 \]

Answer: Lower class limit \( = 80 \) and Upper class limit \( = 90 \). The class is 80 - 90.

➕ More Examples

More Examples

Example 1

Question: In a frequency polygon, the class width is 10 and the class marks used are 15, 25, 35, 45, 55, 65. Find the lower and upper class limits of the class whose class mark is 45.

Solution: The class width is given as \ h = 10. The class mark of the required class is \ 45. Using the formula: Lower Class Limit = Class Mark - h/2. Substituting the values: \[\text{Lower Class Limit} = 45 - \frac{10}{2} = 45 - 5 = 40\] Upper Class Limit = Class Mark + h/2. Substituting the values: \[\text{Upper Class Limit} = 45 + \frac{10}{2} = 45 + 5 = 50\] Therefore, the class whose class mark is \ 45 \ has a lower class limit of \ 40 \ and an upper class limit of \ 50.

Answer: Lower Class Limit = 40, Upper Class Limit = 50

Example 2

Question: A frequency polygon is drawn for data with a class width of 20. The class marks are 110, 130, 150, 170, 190. Find the lower and upper class limits of the class whose class mark is 170.

Solution: The class width is \ h = 20 \ and the required class mark is \ 170. Using the formula for class limits: \[\text{Lower Class Limit} = \text{Class Mark} - \frac{h}{2}\] Substituting: \[\text{Lower Class Limit} = 170 - \frac{20}{2} = 170 - 10 = 160\] Now for the upper limit: \[\text{Upper Class Limit} = \text{Class Mark} + \frac{h}{2}\] Substituting: \[\text{Upper Class Limit} = 170 + \frac{20}{2} = 170 + 10 = 180\] Therefore, the class whose class mark is \ 170 \ has a lower class limit of \ 160 \ and an upper class limit of \ 180.

Answer: Lower Class Limit = 160, Upper Class Limit = 180

🎯 Try a Similar Question

Try a Similar Question

Question: A frequency polygon is drawn for a grouped data set where each class has a uniform width of 20. One of the classes has a class mark of 110. Find the lower and upper class limits of this class.

Solution

  1. Step 1: Recall the relationship between class mark and class limits: The class mark is the mid-point of a class interval. It is given by: \[ \text{Class Mark} = \frac{\text{Lower Class Limit} + \text{Upper Class Limit}}{2} \]
  2. Step 2: Use the class width to set up expressions: Since the class width is 20, if the lower class limit is \( l \), then the upper class limit is \( l + 20 \).
  3. Step 3: Substitute into the formula: We are given that the class mark is 110. Substituting into the formula: \[ 110 = \frac{l + (l + 20)}{2} \]
  4. Step 4: Solve for the lower class limit: Simplify the equation: \[ 110 = \frac{2l + 20}{2} \] Multiply both sides by 2: \[ 220 = 2l + 20 \] Subtract 20 from both sides: \[ 2l = 200 \] Divide by 2: \[ l = 100 \] So the lower class limit is 100.
  5. Step 5: Find the upper class limit: Upper Class Limit = \( l + 20 = 100 + 20 = 120 \). So the upper class limit is 120.

Answer: Lower class limit \( = 100 \) and Upper class limit \( = 120 \). The class is 100 – 120.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5