SOLVER7 Study. Nothing Else.
Practice Set 6.3 Q2

Electricity used by some families is shown in the following table. Find the mode for use of electricity.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you ask everyone in a neighbourhood how much electricity they use. The answer most people give is called the 'mode'. A lot of families use between 60 and 80 units, more than any other group. We do a small calculation to find the exact popular value inside that group. It is like finding which shoe size a shop sells the most. The answer works out to be 72 units of electricity.

Answer: The mode of use of electricity is \( 72 \) units.

📖 Mode of Electricity Usage

Detailed Explanation

The mode of a grouped frequency distribution is the value that occurs most frequently. To find the mode, we first identify the modal class — the class interval with the highest frequency. Then we use the mode formula that involves the frequency of the modal class and the frequencies of the classes just before and just after it. This gives a more accurate estimate of the mode than just picking the midpoint of the modal class.

Formula Used

\[ \text{Mode} = l + \left( \dfrac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] where \( l \) is the lower limit of the modal class, \( f_1 \) is the frequency of the modal class, \( f_0 \) is the frequency of the class before the modal class, \( f_2 \) is the frequency of the class after the modal class, and \( h \) is the class width.

Solution

  1. Step 1: Identify the modal class: Look at the frequencies: 13, 50, 70, 100, 80, 17. The highest frequency is 100, which corresponds to the class 60-80. So the modal class is 60-80.
  2. Step 2: Note the values needed for the formula: From the modal class 60-80: lower limit \( l = 60 \), class width \( h = 20 \), frequency of modal class \( f_1 = 100 \), frequency of the class before (40-60) \( f_0 = 70 \), and frequency of the class after (80-100) \( f_2 = 80 \).
  3. Step 3: Substitute into the mode formula: Using the formula: \[ \text{Mode} = 60 + \left( \dfrac{100 - 70}{2(100) - 70 - 80} \right) \times 20 \]
  4. Step 4: Simplify the numerator and denominator: Numerator: \( 100 - 70 = 30 \). Denominator: \( 200 - 70 - 80 = 50 \). So: \[ \text{Mode} = 60 + \dfrac{30}{50} \times 20 \]
  5. Step 5: Compute the final value: \[ \text{Mode} = 60 + \dfrac{600}{50} = 60 + 12 = 72 \] Therefore, the mode of electricity use is 72 units.

Final Answer

The mode of use of electricity is \( 72 \) units.

Common Mistake

A common mistake is to use the midpoint of the modal class (here 70) as the mode, or to mix up \( f_0 \) and \( f_2 \) (the frequencies just before and after the modal class). Always carefully identify the modal class first and then pick \( f_0 \) and \( f_2 \) from the adjacent classes.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Scan all the class frequencies — 13, 50, 70, 100, 80, 17 — and pick the largest one. The highest frequency is \( 100 \), which belongs to the class interval \( 60 \text{–} 80 \). So the modal class is \( 60 \text{–} 80 \). — Reason: The modal class is always the interval with the greatest frequency; it is the starting point for every mode calculation.
  2. Step 2: Read off the four values the formula needs from the table. Lower class limit of the modal class: \( l = 60 \). Class width: \( h = 20 \). Frequency of the modal class \( (60\text{–}80) \): \( f_1 = 100 \). Frequency of the class just before \( (40\text{–}60) \): \( f_0 = 70 \). Frequency of the class just after \( (80\text{–}100) \): \( f_2 = 80 \). — Reason: Identifying these values carefully before substituting prevents errors inside the formula.
  3. Step 3: Substitute all identified values into the mode formula: \[ \text{Mode} = 60 + \left( \dfrac{100 - 70}{2(100) - 70 - 80} \right) \times 20 \] — Reason: Plugging in the numbers converts the general formula into a specific arithmetic problem we can solve.
  4. Step 4: Simplify the numerator of the fraction. \[ 100 - 70 = 30 \] — Reason: Working on the numerator and denominator separately keeps the calculation organised and reduces mistakes.
  5. Step 5: Simplify the denominator of the fraction. \[ 2 \times 100 - 70 - 80 = 200 - 150 = 50 \] — Reason: Computing \( 2f_1 - f_0 - f_2 \) correctly is critical because an error here changes the final answer.
  6. Step 6: Combine the simplified numerator and denominator to get the fraction, then multiply by \( h \): \[ \text{Mode} = 60 + \dfrac{30}{50} \times 20 \] This gives \[ \text{Mode} = 60 + \dfrac{600}{50} = 60 + 12 = 72 \] — Reason: Multiplying the fraction by the class width scales the correction term to the actual data range, giving the estimated mode value.

Final Answer

The mode of use of electricity is \( 72 \) units.

Common Mistake

One common mistake: Students often take \( f_0 \) and \( f_2 \) from the wrong neighbouring classes, or accidentally swap them, which changes the denominator and leads to an incorrect mode value.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Modal class: 60–80 (highest frequency \( f_1 = 100 \)); \( l = 60 \), \( f_0 = 70 \), \( f_2 = 80 \), \( h = 20 \)
  2. Step 2: \[ \text{Mode} = 60 + \left( \dfrac{100 - 70}{2(100) - 70 - 80} \right) \times 20 \]
  3. Step 3: \[ \text{Mode} = 60 + \left( \dfrac{30}{50} \right) \times 20 = 60 + 12 = 72 \]

Answer: The mode of use of electricity is \( 72 \) units.

➕ More Examples

More Examples

Example 1

Question: The weekly wages (in rupees) of workers in a factory are recorded below. Find the mode of the weekly wages. \nWeekly Wages (Rs): 500–600, 600–700, 700–800, 800–900, 900–1000\nNumber of Workers: 8, 14, 22, 10, 6

Solution: Step 1: Identify the modal class.\nThe frequencies are: 8, 14, 22, 10, 6. The highest frequency is 22, so the modal class is 700–800. \nStep 2: Note the required values.\nLower boundary of modal class: \( l = 700 \)\nFrequency of modal class: \( f_1 = 22 \)\nFrequency of preceding class: \( f_0 = 14 \)\nFrequency of succeeding class: \( f_2 = 10 \)\nClass width: \( h = 100 \) \nStep 3: Apply the mode formula. \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] \nSubstituting the values: \[ \text{Mode} = 700 + \left( \frac{22 - 14}{2(22) - 14 - 10} \right) \times 100 \] \nSimplifying the numerator and denominator: \[ \text{Mode} = 700 + \left( \frac{8}{44 - 24} \right) \times 100 \] \[ \text{Mode} = 700 + \left( \frac{8}{20} \right) \times 100 \] \[ \text{Mode} = 700 + 0.4 \times 100 \] \[ \text{Mode} = 700 + 40 = 740 \]

Answer: Mode of weekly wages = Rs 740

Example 2

Question: The ages (in years) of patients admitted to a hospital in a month are given below. Find the mode of the ages. \nAge (in years): 10–20, 20–30, 30–40, 40–50, 50–60, 60–70\nNumber of Patients: 5, 12, 20, 17, 8, 3

Solution: Step 1: Identify the modal class.\nThe frequencies are: 5, 12, 20, 17, 8, 3. The highest frequency is 20, so the modal class is 30–40. \nStep 2: Note the required values.\nLower boundary of modal class: \( l = 30 \)\nFrequency of modal class: \( f_1 = 20 \)\nFrequency of preceding class: \( f_0 = 12 \)\nFrequency of succeeding class: \( f_2 = 17 \)\nClass width: \( h = 10 \) \nStep 3: Apply the mode formula. \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] \nSubstituting the values: \[ \text{Mode} = 30 + \left( \frac{20 - 12}{2(20) - 12 - 17} \right) \times 10 \] \nSimplifying the numerator and denominator: \[ \text{Mode} = 30 + \left( \frac{8}{40 - 29} \right) \times 10 \] \[ \text{Mode} = 30 + \left( \frac{8}{11} \right) \times 10 \] \[ \text{Mode} = 30 + \frac{80}{11} \] \[ \text{Mode} = 30 + 7.27\ldots \approx 37.27 \text{ years} \]

Answer: Mode of ages \( \approx 37.27 \) years

🎯 Try a Similar Question

Try a Similar Question

Question: The monthly water consumption (in litres) of some households in a colony is recorded in the following table. Find the mode of water consumption. \nMonthly Consumption (in litres) | Number of Households 100 – 200 | 5 200 – 300 | 10 300 – 400 | 18 400 – 500 | 25 500 – 600 | 14 600 – 700 | 6 700 – 800 | 2

Solution

  1. Step 1: Identify the Modal Class: The modal class is the class interval with the highest frequency. Looking at the table, the class 400 – 500 has the highest frequency of 25. So the modal class is 400 – 500.
  2. Step 2: Identify the Required Values: From the modal class 400 – 500, we get: Lower boundary of modal class: \( l = 400 \). Frequency of modal class: \( f_1 = 25 \). Frequency of class preceding modal class (300 – 400): \( f_0 = 18 \). Frequency of class succeeding modal class (500 – 600): \( f_2 = 14 \). Class width: \( h = 100 \).
  3. Step 3: Apply the Mode Formula: The formula for mode is \[ Mode = l + \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \times h \] Substituting the values: \[ Mode = 400 + \frac{25 - 18}{2(25) - 18 - 14} \times 100 \]
  4. Step 4: Simplify the Numerator and Denominator: Numerator: \( 25 - 18 = 7 \). Denominator: \( 50 - 18 - 14 = 18 \). So the expression becomes \[ Mode = 400 + \frac{7}{18} \times 100 \]
  5. Step 5: Calculate the Final Answer: \[ Mode = 400 + \frac{700}{18} \] \[ Mode = 400 + 38.\overline{8} \] \[ Mode \approx 438.89 \text{ litres} \]

Answer: The mode of monthly water consumption is approximately \( 438.89 \) litres.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5