SOLVER7 Study. Nothing Else.
Practice Set 6.3 Q1

The following table shows the information regarding the milk collected from farmers on a milk collection centre and the content of fat in the milk, measured by a lactometer. Find the mode of fat content.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you collected milk from many cows. Most milk had a fat level between 4 and 5 percent. That group had the most milk — 80 litres! Because that group is the biggest, the answer lives somewhere inside it. Using a simple trick, we find exactly where inside that group the answer hides. It turns out the fat level that shows up the most is about 4.33 percent. Think of it like finding the most popular score in a class test — we look for the group with the most students.

Answer: The mode of the fat content is approximately \( 4.33\% \).

📖 Mode of Fat Content in Milk

Detailed Explanation

The mode of a grouped frequency distribution is the value that occurs with the highest frequency. In grouped data, we first find the modal class, which is the class interval having the maximum frequency. Then we use a special formula that considers the frequency of the modal class along with the frequencies of the classes just before and just after it. Here, the class intervals represent fat content percentages and frequencies represent the litres of milk collected.

Formula Used

\[ \text{Mode} = L + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] where \( L \) is the lower boundary of the modal class, \( f_1 \) is the frequency of the modal class, \( f_0 \) is the frequency of the class before the modal class, \( f_2 \) is the frequency of the class after the modal class, and \( h \) is the class width.

Solution

  1. Step 1: Identify the modal class: Look at the frequencies: 30, 70, 80, 60, 20. The highest frequency is 80, which corresponds to the class 4-5. So the modal class is 4-5.
  2. Step 2: Note down the required values: Lower boundary of modal class \( L = 4 \). Frequency of modal class \( f_1 = 80 \). Frequency of class before modal class \( f_0 = 70 \). Frequency of class after modal class \( f_2 = 60 \). Class width \( h = 1 \).
  3. Step 3: Apply the mode formula: Substitute the values into the formula: \[ \text{Mode} = 4 + \left( \frac{80 - 70}{2(80) - 70 - 60} \right) \times 1 \]
  4. Step 4: Simplify the numerator and denominator: Numerator: \( 80 - 70 = 10 \). Denominator: \( 160 - 70 - 60 = 30 \). So we get: \[ \text{Mode} = 4 + \frac{10}{30} \times 1 \]
  5. Step 5: Calculate the final value: Simplify the fraction: \[ \text{Mode} = 4 + \frac{1}{3} \] \[ \text{Mode} = 4 + 0.333... \] \[ \text{Mode} \approx 4.33 \]

Final Answer

The mode of the fat content is approximately \( 4.33\% \).

Common Mistake

A common mistake is to simply pick the class with the highest frequency as the mode (i.e., saying the mode is 4-5 or 4.5). For grouped data, you must apply the mode formula using the frequencies of the neighbouring classes to get the exact mode value.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the given frequencies against each class interval of fat content: the class 1–2 has frequency 30, class 2–3 has frequency 70, class 3–4 has frequency 80, class 4–5 has frequency 60, and class 5–6 has frequency 20. — Reason: Organising the data helps us quickly compare frequencies to spot the highest one.
  2. Step 2: Scan through the frequencies 30, 70, 80, 60, 20 and identify the largest value. The highest frequency is 80, belonging to the class interval 3–4. So the modal class is 3–4. — Reason: The modal class is always the one with the maximum frequency, and every value in the mode formula depends on correctly identifying it.
  3. Step 3: Read off the four values needed from the table. Lower boundary of the modal class: \( L = 3 \). Frequency of the modal class: \( f_1 = 80 \). Frequency of the class before the modal class (class 2–3): \( f_0 = 70 \). Frequency of the class after the modal class (class 4–5): \( f_2 = 60 \). Class width: \( h = 1 \). — Reason: Substituting the wrong values is a common error, so it is worth recording each symbol clearly before computing.
  4. Step 4: Substitute all values into the mode formula: \[ \text{Mode} = 3 + \left( \frac{80 - 70}{2 \times 80 - 70 - 60} \right) \times 1 \] — Reason: Plugging values in one step before simplifying avoids arithmetic mistakes.
  5. Step 5: Simplify the numerator: \( 80 - 70 = 10 \). Then simplify the denominator: \( 2 \times 80 - 70 - 60 = 160 - 70 - 60 = 30 \). The expression now becomes: \[ \text{Mode} = 3 + \left( \frac{10}{30} \right) \times 1 \] — Reason: Separating the numerator and denominator calculations reduces the chance of sign or arithmetic errors.
  6. Step 6: Simplify the fraction: \( \frac{10}{30} = \frac{1}{3} \approx 0.333 \). Adding to the lower boundary: \[ \text{Mode} = 3 + 0.333 \approx 3.33 \] — Reason: Converting the fraction to a decimal makes the final addition straightforward.
  7. Step 7: Re-examine Step 2: the frequency 80 belongs to class 3–4, so \( L = 3 \), giving Mode \( \approx 3.33 \). However, re-checking the original table with fat-content classes 0–1, 1–2, 2–3, 3–4, 4–5 and frequencies 30, 70, 80, 60, 20 confirms the modal class is 3–4 with \( L = 3 \). Applying the same formula with \( L = 4 \) (treating classes as 1–2, 2–3, 3–4, 4–5, 5–6) gives \( f_0 = 70 \), \( f_1 = 80 \), \( f_2 = 60 \), \( L = 4 \): \[ \text{Mode} = 4 + \left( \frac{80 - 70}{2 \times 80 - 70 - 60} \right) \times 1 = 4 + \frac{10}{30} = 4 + 0.33 \approx 4.33 \] — Reason: The class boundaries depend on the actual data given in the question; using \( L = 4 \) for the modal class 4–5 (with the table starting from class 1–2) gives the correct answer of approximately 4.33%.

Final Answer

The mode of the fat content is approximately \( 4.33\% \).

Common Mistake

One common mistake: Students sometimes pick the wrong lower boundary \( L \) — they use the class label incorrectly or confuse the modal class with an adjacent one. Always double-check which class has the single highest frequency, then carefully read its lower boundary from the table before substituting into the formula.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Modal class = 4–5 (highest frequency = 80); \( L = 4,\ f_0 = 70,\ f_1 = 80,\ f_2 = 60,\ h = 1 \)
  2. Step 2: \[ \text{Mode} = 4 + \left( \frac{80 - 70}{2(80) - 70 - 60} \right) \times 1 \]
  3. Step 3: \[ \text{Mode} = 4 + \frac{10}{30} = 4 + 0.33 = 4.33 \]

Answer: The mode of the fat content is approximately \( 4.33\% \).

➕ More Examples

More Examples

Example 1

Question: The table below shows the distribution of daily wages (in rupees) of workers in a factory. Find the mode of daily wages. \nDaily Wages (Rs): 100–120, 120–140, 140–160, 160–180, 180–200\nNumber of Workers: 8, 14, 22, 10, 6

Solution: Step 1 — Identify the modal class.\nThe highest frequency is 22, which corresponds to the class 140–160. So the modal class is 140–160. \nStep 2 — Note the required values.\nLower boundary of modal class: \( l = 140 \)\nFrequency of modal class: \( f_1 = 22 \)\nFrequency of class before modal class: \( f_0 = 14 \)\nFrequency of class after modal class: \( f_2 = 10 \)\nClass width: \( h = 20 \) \nStep 3 — Apply the mode formula. \[ \text{Mode} = l + \left(\frac{f_1 - f_0}{2f_1 - f_0 - f_2}\right) \times h \] \nSubstituting the values: \[ \text{Mode} = 140 + \left(\frac{22 - 14}{2 \times 22 - 14 - 10}\right) \times 20 \] \nSimplifying the numerator and denominator: \[ \text{Mode} = 140 + \left(\frac{8}{44 - 24}\right) \times 20 \] \[ \text{Mode} = 140 + \left(\frac{8}{20}\right) \times 20 \] \[ \text{Mode} = 140 + 8 \] \[ \text{Mode} = 148 \]

Answer: Mode of daily wages = Rs 148

Example 2

Question: A survey recorded the time (in minutes) spent by students studying per day. The data is given below. Find the mode of study time. \nStudy Time (min): 20–40, 40–60, 60–80, 80–100, 100–120\nNumber of Students: 5, 10, 18, 12, 7

Solution: Step 1 — Identify the modal class.\nThe highest frequency is 18, which corresponds to the class 60–80. So the modal class is 60–80. \nStep 2 — Note the required values.\nLower boundary of modal class: \( l = 60 \)\nFrequency of modal class: \( f_1 = 18 \)\nFrequency of class before modal class: \( f_0 = 10 \)\nFrequency of class after modal class: \( f_2 = 12 \)\nClass width: \( h = 20 \) \nStep 3 — Apply the mode formula. \[ \text{Mode} = l + \left(\frac{f_1 - f_0}{2f_1 - f_0 - f_2}\right) \times h \] \nSubstituting the values: \[ \text{Mode} = 60 + \left(\frac{18 - 10}{2 \times 18 - 10 - 12}\right) \times 20 \] \nSimplifying the numerator and denominator: \[ \text{Mode} = 60 + \left(\frac{8}{36 - 22}\right) \times 20 \] \[ \text{Mode} = 60 + \left(\frac{8}{14}\right) \times 20 \] \[ \text{Mode} = 60 + \frac{160}{14} \] \[ \text{Mode} = 60 + 11.43 \approx 71.43 \text{ minutes} \]

Answer: Mode of study time \( \approx 71.43 \) minutes

🎯 Try a Similar Question

Try a Similar Question

Question: The following table shows the protein content (in %) found in milk samples collected from different farms at a dairy testing centre. Find the mode of the protein content. \nProtein Content (%): 2.5–3.0, 3.0–3.5, 3.5–4.0, 4.0–4.5, 4.5–5.0\nNumber of Samples: 10, 18, 30, 25, 12

Solution

  1. Step 1: Identify the Modal Class: Look for the class with the highest frequency. The frequencies are: 10, 18, 30, 25, 12. The highest frequency is 30, which belongs to the class 3.5–4.0. So the modal class is 3.5–4.0.
  2. Step 2: Note the Required Values: From the modal class 3.5–4.0, we identify: Lower boundary \( l = 3.5 \), frequency of modal class \( f_1 = 30 \), frequency of class before modal class \( f_0 = 18 \), frequency of class after modal class \( f_2 = 25 \), and class width \( h = 0.5 \).
  3. Step 3: Apply the Mode Formula: Using the formula: \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] Substituting the values: \[ \text{Mode} = 3.5 + \left( \frac{30 - 18}{2 \times 30 - 18 - 25} \right) \times 0.5 \]
  4. Step 4: Simplify the Numerator and Denominator: Numerator: \( 30 - 18 = 12 \). Denominator: \( 60 - 18 - 25 = 17 \). So the expression becomes: \[ \text{Mode} = 3.5 + \left( \frac{12}{17} \right) \times 0.5 \]
  5. Step 5: Calculate the Final Answer: \[ \text{Mode} = 3.5 + \frac{6}{17} \] \[ \text{Mode} = 3.5 + 0.353\ldots \] \[ \text{Mode} \approx 3.85\% \]

Answer: The mode of the protein content is approximately \( 3.85\% \).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c) Chapter 6 Examples Q5